Search the record

EE WAS USING SPUD WRENCH & HAMMER CLEANING BUILDUP OFF OF SCREEN DECK PIECE OF METAL CHIPPED OFF OF HAMME OR WRENCH STRIKING EE ON ARM.

WORKING IN A AWKWARD POSITION. TWISTED LOWER BACK.

EMPLOYEE HOLDING SPUD BAR WHILE WORKING UNDER JAW CRUSHER ON BELT. OTHER EMPLOYEE WENT TO HIT SPUD BAR WITH SLEDGEHAMMER AND SLIPPED-HITTING EMPLOYEE WITH SLEDGHAMMER IN NECK.

EE WAS IN SQUATTED POSITION WORKING ON ROCK DRILL HAMMER. REMOVING COLLAR FROM BROKEN BIT BY TAPPING WITH SHOP HAMMER, CAUSING METAL FRAGMENT TO PUNCTURE SCROTUM AND TESTICLE.

THERE WAS A LARGE ROCK STUCK IN THE PRIMARY JAW CRUSHER. EE TRIED TO MOVE THE ROCK WITH A BAR. THE BAR SLIPPED AND HIS LEFTTHUMB WAS SMASHED BETWEENTHE BAR AND THE HAND RAILING.

HE WAS TAKING BOLTS OFF CHUTE TO REMOVE IT. CHUTE WAS HELD UP WITH COME-ALONG. CHUTE SLIPPED WHEN BOLT WAS REMOVED AND PINCHED HIS HAND AGAINST THE BIN.

EE WERE ADJUSTING 2 SYMONS CRUSHER WITH COME A LONG. TIGHTENED COME ALONG AND II SLIPPED CAUSING ADJUSTER BAR TO HIT EE CHIN. CUT TO RT SIDE OF CHIN.

EE WAS USING BAR TO DRIVE CENTER PIN FROM REAR END OF HAUL TRUCK. WHEN THE PIN CAME OUT THE REAR END MOVED BACK CAUSING THE BAR TO STRIKE EE.

A LARGE ROCK WAS HUNG IN THE JAW CRUSHER. THE MEN WERE TRYING TO REMOVE IT. THE BAR THEY WERE USING TO PRY WITH SLIPPED AND KNOCKED GLENS SAFETY GLASSES OFF WHEN THE GLASSES CAME OFF THEY HIT HIS FACE AND CUT HIS HEAD OVER THE RIGHT EYE. THE DR. CLEANED THE CUT AND THE CUT REQUIRED 3 STITCHES.

EMPLOYEE WAS TIGHTENING BOLTS ON CONVEYOR FRAME.BEING REPAIRED. WRENCH SLIPPED OFF NUT ALLOWING HIS HAND TO STRIKE HIS HAND TO STRIKE AGAINST METAL FRAME WORK CUTTING HIS HAND.

EE WAS CUTTING AN EMPTY HEET BAG OPEN, WHEN THE KNIFE SLIPPED.

EMPLOYEE WAS USING A IRON BAR TO UNJAM A CRUSHER. WHILE USING THE BAR TO MOVE A ROCK, ANOTHER ROCK FELL STRIKING EMPLOYEE'S LEFT HAND CAUSING A LACERATION BETWEEN THE INDEX FINGER AND THUMB. R EQUIRED 5 STITCHES.

EMPLOYEE WAS REMOVING DRILL BIT FROM ROCK DRILL TO REPLACE HE STRUCK BIT WITH HAMMER TO LOOSEN METAL SLIVER FLEW & PUNCTURED HIS ABDOMEN

EMPLOYEE WAS CUTTING SKIRT BOARD RUBBER WITH A POCKET KNIFE KNIFE SLIPPED & CUT RT HAND BETWEEN THUMB & FOREFINGER

STRIKING METAL LINER WITH HAMMER CAUSING PIECE OF METAL TO FLY IN RT CHEEK PUNCTURE TO FACE

HOLDING PUNCH UP TO PIN IN ROLLER FRAME WHILE ANOTHER EMPL HIT PUNCH WITH SLEDGE HAMMER.PIN WASNT AS TIGHT AS EXPECTED AND FLEW OUT EASILY.SLEDGE HIT LEFT HAND MIDDLE FINGER CAUSING BONE BREAK AND CHIP.

EMPL USING 3/4 DRIVE RATCHET WITH A 4 TO 1 MULTIPLIER TIGHTENING SIDE FRAME BOLTS ON A 245 CAT SHOVEL.SPRAINED LOWER BACK.

EE WAS BENT OVER ATTEMPTING TO REMOVE BROKEN BOLTS FROM THE WINDSHIELD WASHER RESERVIOR HOLD DOWN STRAPS ON A CAT D 10 DOZER. THE EE STRAINED HIS LOWER BACK WHEN HE ATTEMPTED TO STRAIGHTEN UP STAND UP FROM HIS BENT OVER POSOTION.

EE WAS CUTTING A SECTION OF RUBBER HOSE WITH A UTILITY KNIFE CLOSE TO HIS LEG. PULLED KNIFE TOWARD HIMSELF IT SLIPPED AND CUT HIS RIGHT LEG.

EMPL HAD DUMPED LOAD OF ROCK INTO HOPPER OF PORTABLE RIP-RAP PLANT.ROCK GOT HUNG UP,HE WAS ASSISTING PLANT OPERATOR WITH PRY BAR WHEN BAR SLIPPED AND CAUSED BAR AND RIGHT HAND TO HIT X-BAR MAS HING END OF LITTLE FINGER.

EMPL GOUGING OUT CHUTE WITH CROWBAR WHEN IT SLIPPED CATCHING FINGER BETWEEN BAR AND CHUTE.

EMPLOYEE WAS BEATING ON A CYLINDER IN THE SHOP WITH A SLEDGE HAMMER WHEN A PIECE OF THE HAMMER CAME OFF JOING IN HIS KNEE.