Search the record

EE WAS POKING CHOKED STACK ON 4 KILN WITH A LONG PIPE WHEN MATERIAL SHOT OUT OF HOLE AND ONTO HIS RIGHT FOOT.

WHILE EE WAS TIGHTENING BOLTS ON THE DOORS OF 5 COL MILL HE FELT PAIN IN THE LEFT GROIN AREA.

CLEANING CCDC DECK WITH A SHOVEL AND TURNED SIDEWAYS TWISTING HIS LEFT KNEE.

EE WA HAMMERING ON THE RAW BOX WITH SLEDGE HAMMER TO GET STONE TO FLOW WHEN HE FELT PAIN IN HIS LOWER RIGHT BACK MUSCLE.

EE WAS SHOVELING SNOW AWAY FROM KILN TORCH WHEN HE TURNED INTO THE TORCH AND SUSTAINED A CUT ABOVE HIS RIGHT EYEBROW.

EMPLOYEE WAS CLEANING UP KILN DUST WITH A BROOM & SHOVEL. SUDDENLY FELT PAIN PRIMARILY IN GROIN AREA.

EMPLOYEE WAS PUSHING #2 KILN HOOD WITH PUSHER. HE SLIPPED OFF THE HANDLE AND FELT PAIN IN HIS LEFT SHOULDER. HE WENT TO THE DR 1-25-93.

EMPLOYEE WAS SHOVELING SPILLAGE ON THE CCDC DECK.DUST BLEW IN BEHIND HIS GLASSES INTO HIS RIGHT EYE.

WHILE HITTING METAL SHIMS BETWEEN THE KILN BRICK BEING INSTALLED IN #4 KILN WITH A MALLET, A PIECE OF FOREIGN MATERIAL GOT BEHIND HIS SAFETY GLASSES AND INTO HIS RIGHT EYE.

EMPLOYEE WAS USING A BAR HOOK TO REMOVE A STUCK ROCK IN THE HOPPER WHERE #2 QUARRY BELT DUMPS INTO #3 QUARRY BELT WHEN HE RECEIVED A STRAIN IN THE GROIN

INSTALLING BRICK HAMMERING HAMMER HIT BRICK DEFLECTED DOWN HIT LITTLE FINGER ON L HAND

EMPLOYEE WAS REMOVING A LUMP OF KILN DUSAT FROM THE CONDITIONING TOWER WHEN THE LUMP SHIFTED AND HIT THE POKE BAR AND SLEDGE HAMMER CAUSING HIS WRIST TO TWIST.

WHILE TRYING TO DISLIDGE CONCRETE FROM STONE FEEDER #3 EMPLOYEE FELT A SHARP PAIN IN BACK OF NECK.

EMPLOYEE WAS USING WRENCH TO REMOVE PIPE ELBOW ON WATER PIPE WHEN PIPE ELBOW BROKE LOOSE & EMPLOYEE BANGED ELBOW AGAINST ELEVATOR CASING

EMPLOYEE WAS HELPING TO LOWER BEARING WITH A H OIST FRAME HOLDING THE HOIST SLIPPED & FELL & HIT EMPLOYEE ON THE HEAD

EMPLOYEE WAS HELPING TO LOWER BEARINGS WITH A HOIST FRAME HOLDING THE HOIST SLIPPED & FELL & HIT EMPLOYEE ON RT SHOULDER

EMPLOYEE WAS PULLING ON THE CHAIN OF A HOIST THAT WAS ATTACHED TO #1 FINISH MILL ELEVATOR AND BUCKETS WHEN HE FELT PAIN IN HIS RIGHT SHOULDER.

EMPLOYEE WAS SWINGING A 20 LB. SLEDGE HAMMER TO LOOSEN #2 RAW MILL HATCH IN PREPERATION TO LOOSEN #@ RAW MILL HATCH IN PREPERATION TO RECEIVE A NEW BALL LOAD. TWISTING WHILE SWINGING CREATED PAIN IN HIS LOWER BACK, AND RIGHT SIDE.

EMPL TIGHTENING SHROUD ON LOADER.WRENCH SLIPPED OFF NUT,HIT HIM ON FOREHEAD.

EMPLOYEE WAS HAMMERING ON RAW SILO FEEDER TO GET MATERILA TO FLOW. A METAL SILVER MUST HAVE BROKEN OFF THE HAMMER OR PIPE AND FLEW INTO EMPLOYEES RIGHT EYE.

EMPL WAS CLEANING OUT AIRLINE VALVE WITH SCREWDRIVER. AIRLINE OPENED SUDDENLY & DIRT BLEW INTO SKIN OF RIGHT HAND.

EMPLOYEE WAS REMOVING NORTH SIDE COOLER WHEEL AXLE SHAFT OF WHEEL WAS BROKEN & ONE PIECE REMOVED AS THEY WERE LOWERING THE WHEEL IT TILTED & THE OTHER PART OF THE SHAFT FELL OUT & HIT TOP OF F OOT

CHANGING GUDGEON IN BIN SCREW CONVEY, PRYING WITH PINCH BAR FELT PAIN IN R SHOULDER AND ARM

EMPLOYEE WAS REMOVING A NUT OFF THE TILT CYLINDER OF #8 LOADER, WHEN A BLAST OF AIR BLEW DIRT INTO HIS LEFT EYE, EVEN THOUGH HE WAS WEARING SAFETY GLASSES.

EMPL WAS INSTALLING SEPERATOR BLADES WHILE TIGHTENTING BOLTS HE FELT PAIN IN BACK.

EMPL TIGHTENING GUDGEON BOLT ON SCREW CONVEYOR.RATCHET WRENCH SLIPPED CUTTING THROUGH RFINGERNAIL,LITTLE FINGER LEFT HAND.ALSO BRUSH BURN.

AFTER COMPLETING PREVENTIVE MAINTENANCE ON #4 COAL MILL EMPLOYEE WAS CLOSING DOOR WHEN HIS WRENCH SLIPPED OFF A NUT

REMIVNG PUMP SCREW FORM HOUSING WITH PRYBAR SLIPPED PINCHING MIDDLE FINGER R HAND AGAISNT PUMP COUPLING.

EMPLOYEE WAS STRIKING A STEEL DRIFT WITH A HAMMER TO REMOVE AN IDLER BEARING A PIECE OF STEEL BROKE OFF & STRUCK UPPER RIGHT ARM

EMPLOYEE WAS USING A STEEL HAMMER TO REMOVE A SPROCKET OFF A FEEDER SHAFT. A METAL CHIP FLEW OFF THE SPROCKET AND WENT INTO UPPER LEFT ARM.

EMPL WAS CHECKING FAN BEARING ON F DUST COLLECTOR IN PACKHOUSE #2. BAR THAT WAS USED TO CHECK BEARING PLAY SLIPPED & PINCHED RIGHT FINGER ON FAN MOTOR BASE.

EMPL WAS BREAKING UP CLINKER LUMPS WITH A BAR AT THE FEEDER OF CLINKER SILO #3 HE PINCHED HIS L RING FINGER BETWEEN THE BAR AND THE LOWER PORTION OF THE CLINKER SILO CONE

EMPL WAS USING A HAND FILE TO SHARPEN A LAWN MOWER BLADE WHICH WAS SECURED IN A VISE ON A WORK BENCH HE SLID OVER \THE BACK SIDE OF THE BLADE CUTTING THE PALM OF L HAND BEHIND THUMB

WHILE REMOVING BOLTS FROM A FEED PIPE, INJURED PINCHED LEFT INDEX FINGER BETWEEN THE PIPE AND A WRENCH.

EMPLOYEE WAS TRYING TO FREE A LARGE ROCK IN THE PRIMARY CRUSHER WITH A MECHANICAL HOOK AND CABLE. THE HOOK SLIPPED OFF THE ROCK AND HIT HIM ABOVE THE LEFT EYE.

EMPLOYEE WAS REMOVING METAL STRANDS FROM LATHE, WITH TOOL DESIGNED FOR THIS PURPOSE, WHEN A METAL STRAND SWUNG BACK PAST THE TOOL AND STRUCK RIGHT THUMB CAUSING A DEEP CUT.

TIGHTENING BOLTS OF CUTTING BLADE ON DEERE TRACTOR MOWER, WRENCH SLIPED AND RIGHT INDEX FINGER HIT BLADE, WHICH HAD JUST BEENSHARPENED CAUSING A CUT AT THE KNUCKLE RIGHT INDEX FINGER.

EMPLOYEE WAS WORKING IN THE REPAIR SHOP REMOVING A BEARING RACE FROM A C-200 COMPRESSOR. WHILE A CO-WORKER WAS ATTEMPTING TO HAMMER IT OFF, A PIECE CHIPPED OFF AND CAUSED A PUNCTURE WOUND ON LEFT FOREARM.

EMPLOYEE WAS SWEEPING UP PILE OF HOT DUST WHICH WAS DUMPED ON FLOOR FROM PRECIPATOR DUST BOXES. BOTTOM OF EMPLOYEE'S FEET GOT HOT AND A BLISTER ON EACH FOOT DEVELOPED- SHOES WERE NOT AFFECTED. NO DIRT GOT INTO SHOES.

SEVERAL EMPL TR2ING TO REMOVE RACE OF BEARING ON COAL MILL USING TORCH AND SLEDGE HAMMERS.PIECE OF METAL SLIPPED OFF HIT EMPL UNDER CHIN CUTTING HIM.