Search the record

THE RADISTON OVER HEATED ON THE 600 HOE. INJURED HAD CLEANED SCREEN AND HAD HIS ARM INSIDE VENTS, TO TIGHTEN WING NUT. HE SLIPPED AND INJURED HIS RIGHT FOREARM. HE SLIPPED OFF THE CAT PADS.

EMPLOYEE WAS CUTTING FLEXCO TAPE WITH RAZOR KNIFE, SLIPPED AND CUT FINGER. EMPLOYEE WAS TAKEN TOEMERGENCY ROOM AND RECEIVED FIVE STITCHES.

EE WAS STANDING IN THE BED OF THE R-25 TIGHTENING THE BOLTS HOLDING A BIN VIBRATOR ON. THE WRENCH SLIPPED OFF THE BNUT AND THE EE FELL BACKWARDS OVER A SMNALL PILE OF SCREENING IN THE TRUCK BE D. HE LANDED ON HIS LEFT SHOULDER, INJURING IT.

COMEALONG SLIPPED OFF WHILE PULLING SCREEN.

FOREMAN AND EE WERE USING A HAMMER AND PINCH TO REMOVE TEETH ON DRAGLINE BUCKET, PIECE OF METAL WENT INTO EE S WRIST.

BELT SLIPPIN GTRY TO STOP GRAVEL COMING OUT OF CHUTE WITH SHOVEL AND HANDS.

AFTER REMOVING WELDING HOOD TO HIT SLAG WITH SLAG HAMMER, EE DID NOT PUT ON SAFETY GLASSES.

CUTTING THROUGH BELT WITH POCKET RAZER KNIFE ANDKNIFE CLOSED ON FINGER

EE WAS TRYING TO KNOCK WOODEN HAMMER HANDLE BACK INTO TWO POUND HAMMER. A SPLINTER FROM HANDLE RAN THROUGH HIS RIGHT FOREFINGER. DOCTOR OPENED FINGER TO REMOVE SPLINTER. HAD TO HAVE FOUR STITC HES.

EE WAS HELPING JACK UP CONE CRUSHER, WHEN JACK KICKED OUT STRIKING EE IN HIS CHEST, EE SUFFERED A BRUISE TO HIS CHEST.

EMP WAS TRYING TO DISLODGE A LARGE ROCK THAT WASPLUGGING OPENING OF FEED HOPPER. WHILE PRYING ATROCK WITH PRY BAR, ROCK SLID, CAUSING BAR TO COME LOOSE. WHEN BAR CAME LOOSE IT KNOCKED EMP OFF BALANCE CAUSING HIM TO FALL FORWARD, HITTING HAND/WRIST ON STEEL I BEAM.

EE WAS KNOCKING BOLTS OUT OF GRAVITY TAKEUP WITH HAMMER & PUNCH PIECE OF METAL STRUCK HIM IN LEFT EYE.

WHILE WORKING IN IMPACK MILL, EE WAS DRIVING A BOLT OUT OF HOLE WITH HAMMER AND PUNCH TO CHANGE A WARE PLATE. IN DOING SO GOT A PIECE OF METAL IN LEFT EYE.

EMPLOYEE WAS SPLICING A BELT CONV, USING A COME-A-LONG, WHEN THE HANDLE BENT AND HE LOST HIS BALANCE AND FELL BACK INTO CONV.

EE WAS CHECKING PLANITARIES SERVICING MACHINE AND PULLED A MUSCLE IN HIS RIGHT SHOULDER.

EE WAS TRYING TO ADJUST TAIL PULLEY. EE STUCK A WRENCH IN BETWEEN GUARD WHEN HIS WRENCH CAUGHT IN TAIL PULLEY, WRENCH IN TURN SMASHED TWO FINGER ON RIGHT HAND. EE WENT TO HOSPITAL. FINGERS REQ UIRED STITCHES.

LOST CONTROL OF PRY BAR RESULTING HITTING LEFT HAND ON BOLTS DOING DAMAGE TO LEFT HAND RING FINGER.

EE WAS REMOVING A ROCK FROM FEEDER WITH A 8# HAMMER. SECTION OF ROCK BROKE LOOSE AND HIT HIM ON THE RT LEG, ABOVE ANKLE AND BELOW KNEE.

WORKING ON MASON SAND CONVEYOR RE-SPLICING BELT. CUTTING CONVEYOR BELT WITH RAZOR KNIFE. KNIFE SLIPPED CUTTING LEFT THUMB.

SMASHED THUMB WHILE UNLODGING ROCK FROM SILO SCHUTE. USED A LONG BAR TO UNLODGE ROCK AND WHEN ROCK BECOME FREE, IT PULLED LONG BAR UP AND THUMB WAS PINNED BETWEEN PIECES OF METAL IN SILO SCHU TE.

WORKING ON AMMCO DREDGE.REPLACING CUTTER HEAD.I WAS HOLDING A SPECIAL WRENCH AS IT WAS BEING HIT BY A SLEDGE HAMMER.THE WRNECH SLIPPED AS I BEGAN TO RE-ADJUST THE LABORER HIT IT AGAIN WITH HAM MER,STRETCHING THUMB OUT OF SOCKET.

TYRING TO ALIGN BOLT HOLES UP ON 90 DEGREE ELBOW I TOOK A HAMMER HITTING BOLTS THRU HOLES NOT NOTICING SAND IN THREADS SAND SPLATTERED INTO LEFT EYE.

WAS WORKING ON DRIVE LINE ON DUMP TRUCK CUTTING NUT WITH HAMMER AND CHISEL. PIECE OF STEEL GOT IN EYE.

SHOVELED ASPHALT OUT LOADER BUCKET & BRUISED RIGHT HAND

WELDING TWO-40' SECTIONS OF DREDGE LINE TOGETHER.TOOK 6' PRYBAR AND TRIED TO LIFT ONE SECTION UP FOR ALIGNMENT CAUSING PAIN IN LOWER BACK GOING DOWN RIGHT SIDE INTO FEET.

ADJUSTING CLUTCH ON DREDGE WITH BAR,IT SLIPPED AND HIT RIGHT EYE.

EMPLOYEE WAS TIGHTENING NUT WITH WRENCH WHEN WRENCH SLIPPED OFF & HIT THE BACK OF HIS HAND ON A METAL OBJECT BRUISING HAND EMPLOYEE CAME BACK TO WORK THE SAME DAY BUT WAS ON LIGHT DUTY FOR TWO DAYS

PRESSING SLEEVE3ON SHAFT WITH HYDRALIC JACK AND JACK SICKED OUT AND HIT ARM.

WHILE DRIVING SPECIAL MADE PUMCHWITH A WOODEN HANDLE IN IT WITH HAMMER A SMALL PC OF STEEL FROM EITHER THE PUNCH OR HAMMER WENT INTO THE LITTLE FINGER AT THE FIRST JOINT ON LEFT HAND