Search the record

RAISED BELT RAIL WITH JACK WHEN RAIL SLIPPED AND LANDED ON LEFT HAND LITTLE FINGER.

USING A HAMMER TO DRIVE A METAL PIN IN SHOVEL BUCKET TOOTH. PIECE OF METAL FLEW OFF TOOTH AND STRUCK HIM IN TESTICLE.

LOOSENING BOLT ON RAIL VEHICLE & BEGAN EXPERIENCING LOWER BACK PAIN

TIGHTENING TRAILER WHEEL WITH LUG WRENCH; WRENCH SLIPPED CAUSING HIM TO PUT ALL WEIGHT ON RIGHT KNEE.

WHILE IN THE PROCESS OF MAKING A BELT SPLICE AND HITTING THE NAIL BOARD WITH A HAMMER. HE FELT A PAIN IN THE LOWER PART OF HIS BACK.

EE WAS HANGING A SCOOP PUMP MOTOR WITH RED DEVIL WHEN A SMALL SLUG OF ROCK FELL HITTING HIM ON THE HAND.

EMPLOYEE WAS TAKING A FITTING OFF OF A PUMP ON A SHUTTLE CAR. HE WAS STANDING ON A WRENCH WITH BOTH FEET & USING THE MINE ROOF WITH HIS BACK FOR A BRACE.

WHILE SPLICING A CONVEYOR BELT HE WAS STRUCK ON HIS FINGER WITH A HAMMER.

EMPLOYEE WAS TRYING TO KNOCK A LOCK OFF OF A MINE LIGHT RACK WITH A HAMMER.

EKMPLOYEE WAS CUTTING ARUBBER HOSE WHEN THE KNIFE CAME OUT/THROUGH INTO HIS HAND.

EMPLOYEE HIT HIMSELF IN EYE WHILE REMOVING A PIECE OF METAL THAT WAS STUCK.

EMPLOYEE WAS TRYING TO UNSTOP A NOZZEL ON A SEEDER TRUCK BY PASSING A STEEL ROD IN & OUT OF IT.

EMPLOYEE WAS USING A HAMMER ON A WHEEL UNIT HE H IT IT WITH THE HAMMER & A PIECE OF METAL WENT INTO HIS EYES

EMPLOYEE STRUCK FINGER WITH A HAMMER.

EMPLOYEE WAS HITTING A KNOCKER WRENCH WITH A SLEDGE HAMMER WHEN IN A SWING, THE HAMMER HIT THE RUNNING BOARD, GLANCING OFF, AND HITTING HIS THUMB.

EMPLOYEE WAS PULLING A STUCK SHUTTLE CAR OUT OF DUMPING POINT (FEEDER) AREA WITH A HOOK & CHAIN THE CHAIN BROKE

PLACING A WRECKED CAR BACK ON TRACK WITH A RAIL ROAD JACK WHEN THE JACK SLIPPED OUT PINNING HAND.

WHILE WORKING ON MINE TRACK, EMPLOYEE HIT HIS ANKLE WITH AN AXE.

EMPLOYEE WAS PRYING CAP COAL WITH A SLATE BAR.

54730STANDING ON A PIECE OF BRATTICE CLOTH CUTTING IT WITH A KNIFE. IT SLIPPED CUTTING LEG ABOVE THE KNEE.

EMPLOYEE WAS ASSISTING IN BELT SET UP USING RED DEVIL WENCH TO TIE OFF THE BELT.HE REACHED ACROSS THE BELT TO MAKE A SLICE THE WENCH BROKE AND THE BELT PULLED HIM THROUGH THE ROLLERS FOR APPRO X 10 FT.

EMPLOYEE WAS LAYING MINE TRACK,WHEN THE STEEL TURNED OVER THE TRACK BAR HE WAS USING HIT HIT HIM UNDER THE CHIN.

EMPLOYEE WAS PLACING A CLAMP ON THE CONVEYOR BELT WHEN THE CLAMP TURNED OVER, CATCHING FINGERS ON THE RAILS.

EMPLOYEE WAS JACKING A DOLLY BACK ON TRACK, THE JACK HANDLE BROKE WITH ONE END HITTING HIM OVER THE EYE BROW.

EMPLOYEE WAS WOKRING ON THE TRACK WITH A JACK AND BAR WHEN THE BAR CAME OUT, STRIKING HIM IN THE MOUTH.

EMPLOYEE LIFTED A LID ON A CONT MINER WITH A BAR.THE BAR SLIPPED CAUSING THE LID TO FALL CATCHING HIS FINGER.

JACKING CAR ON TRACK LIFTING JACK SLIPPED TURNED OVER HITTING TIMBER LAYING ON TRACK HIT LEG

EMPLOYEE WAS LAYING MINE TRACK WHEN THE WRENCH SLIPPED PINNING FINGER BETWEEN WRENCH AND LUG NUT.

EMPLOYEE WAS BUILDING A BRATTICE & HAD TO CUT A BLOCK WITH HIS HAMMER HE HIT FINGER WITH CUTTING EDGE OF HAMMER

EMPL HAD MINE CAR JACKED UP WHICH HAD WRECKED WHEN JACK HANDLE FLEW OUT STRIKING HIM ACROSS NOSE.

EMPLOYEE WAS REMOVING ROCK OFF OF A CONT. MIENR WITH A SLATE BAR.

HOLDING SOCKET WITH HAND WHEN SOCKET BURST CAUSING CUT BETWEEN THUMB AND FINGER.

EMPLOYEE WAS JACKING A WRECKED DIESEL LOCOMOTIVE BACK ON TRACK WHEN HE LOWERED HIS KNEE DOWN ON A SWITCH POINT.THIS INCIDENT OCCURRED 08-14-91,BUT EMPLOYEE WORKED UNTIL 02-04-92.

EMPLOYEE WAS BUSTING A ROCK OUT OF THE CONVEYOR CHAIN OF THE CONT MINER WHEN HE HIT A GUARD WITH THE HAMMER CAUSING IT TO SPRING BACK HITTING HIM ON THE EAR.

EE WAS TRYING TO PRY DRILL STEEL BACK INTO ITS RACK WHEN BAR SLIPPED BAR FLEW BACK STRIKING HIM ON THE FINGERS THE STEEL ROLLED OUT OF RACK HITTING HIM ON THE FOOT.

EMPLOYEE WAS REMOVING A PIECE OF ROCK WITH A SLATE BAR WHICH HAD LODGEDF BEHIND PLUNGER OF SCOOP BUCKET

EMPLOYEE WAS USING A CHAIN RATCHET TO MOVE A 250 HP MOTOR, WHEN CHAIN SLIPPED. CATCHING HIS HAND.

EMPL WAS KNOCKING OFF BEARING TAILPIECE USING HAMMER & PUNCH WHEN PUNCH CHIPPED OFF & FLEW INTO NECK.

EMPLOYEE WAS SAWING A TIMBER BLADE HUNG ON A PIECE OF BARK BLADE JUMPED OUT STRIKING HIM ON THE LEFT HAND.

EMPLOYEE WAS LETTING RED DEVIL OFF AT BELT TAKE-UP. TI SLIPPED, TIH HANDLE HITTING HAND.

EMPLOYEE WAS SAWING A TIMBER WITH A BOW SAW, SAW JUMPED OUT OF TIMBER, STRIKING HIM ON THE LEFT HAND.

WHILE HOLDING A METAL STAKE WHILE IT WAS BEING DRIVEN IN THE GROUND. A SMALL PIECE OF METAL BROKE OFF STRIKING HIM ON THE RIGHT ARM ABOVE THE ELBOW. IT WAS REMOVED AND STITCHES WERE REQUIRED.

EMPLOYEE WAS REMOVING A OIL DRAIN PLUB FROM A TRAM MOTOR WHEN THE WRENCH SLIPPED. STRIKING HIM IN THE MOUTH.

THE EMPL WAS INJURED WHEN HIS KNIFE SLIPPED WHILE WORKING ON HIS TRUCK LIGHTS HE CUT HIS L WRIST SUTURES REQUIRED

REPL;ACE PC OF CONVEY BELT RELEASING COM A LONGS WHICH AHD THE TWO ENDS PULLED TOGETHER THUMB BECAME CAUGHT BETWEEN TRIGGER AND HANDLE.

EMPLOYEE WAS JACKING UP A MANTRIP CAR WITH A RAIL ROAD JACK. HE FELT A SHARP PAIN IN THE UPPER PART OF BACK. HE HURT IT AGAIN THE NEXT DAY WHILE PICKING UP A PIECE OF CONVEYOR BELT.

EMPLOYEE WAS TRYING TO TAKE A BOLT OUT OF A RIPPER CHAIN IDLER IN A CONTINUOUS MINER WITH A PAIR OF VISE-GRIPS THE VISE GRIPS SLIPPED CAUSING HIS HAND TO HIT A SHARP JAGGED EDGE ON THE IDLER.

EMPLOYEE WAS KNELLING IN A SCOOP BUCKET WATCHING I.NAME HAMMER ON A BEARING TRYING TO KNOCK A RING OFF

EMPLOYEE WAS RAISING A JOINT OF RAILROAD STEEL WITH A JACK THE JACK EITHER DID NOT CATCH OR IT RELEASED BY ACCIDENT STRIKING EMPLOYEE ON THE CHIN.

EMPLOYEE WAS TI1HTENING IDLER BOLTS WITH COMBINATION WRENCH,THE WRENCH SLIPPED OFF BOLT HEAD,HITTING EMPLOYEE ON NOSE AND UPPER LIP-CONTUSION TO NOSE AND SUPERFICIAL LACERATION TO UPPER LIP.