Search the record

WELDING IN HAMMERMILL, GOT WELDING FLASH BURNS

EMPLOYEE WAS GRINDING METAL AND GOT METAL PARTICLE EMBEDDED IN EYE.

EE WAS REMOVING CAP ON HYDRAULIC TANK. WHEN HE WAS REMOVING THE BOLTS USING AN IMPACT WRENCH, THE SOCKET SHATTERED AND A PIECE STRUCK HIS FINGER (LEFT HAND). NO STITCHES WERE REQUIRED--THE WOU ND WAS BUTTERFLY TAPED. INVESTIGATION REVEALED EE WAS NOT USING AN IMPACT SOCKET.

EMPLOYEE WAS INJURED WHEN A LOAD ON A CRANE SWUNG IN HIS DIRECTION. AS HE QUICKLY MOVED OUT OF THE WAY, HE CAUGHT HSI FOREARM ON A METAL I BEAM RESULTING IN A LACERATION.

HOLDING TORCH HOSE WHILE SUPERINTENDENT WAS USING TORCH, SPARK FLEW BY PIN HOLE IN HOSE AND IGNITED SPARK, CAUSING SECOND DEGREE BURNS TO THE PALM OF HIS RIGHT HAND.

EE WAS STEADYING ENGINE BLOCK SUSPENDED OVER CRIBBING. A SUSPENSION BRACKET FAILED AND ONE END OF THE ENGINE BLOCK DROPPED. THE RESULTING LOAD SHIFT CAUSED THE OPPOSITE END OF THE BLOCK TO STR IKE THE EE'S THIGH AND TRANSMITTED FORCE TO THE EE'S LEFT HEEL, WHICH FRACTURED.

EMPLOYEE WAS USING A HOLE SAW WHEN THE SAW LODGED IN THE HOLE CAUSING THE DRILL TO SPIN THE HANDLE H IT THE BACK OF HIS RT HAND

EMPLOYEE WAS SITTING IN MARION SHOVEL AND WAS UNABLE TO GET OUT OF IT. EMPLOYEE ALLEGES THIS IS A WORK RELATED INCIDENT.

LIFTING 2 HEAVYWALL PIPE WITH CRANE AND THEY PINCHED TOGETHER CATCHING MIDDLE FINGER LEFT HAND. REQUIRED 4 STITCHES.

OPERATING ENGINE LATHE CUT HIS FINGER (RIGHT INDEX) ON SHARP METAL.

54736YEE WAS MAKING A PELLET FOR THE LAB X-RAY ANALYZER.THE SWING ARM OF THE PELLET MAKER DID NOT CLEAR THE PIN AND CAUGHT HER RIGHT HAND IN A PICH POINT CAUSING A CUT REQUIRING 4 STITCHES.NO 36230TIME INVOLVED.EMPLOYEE HAD ONE SINGLE DAY OF VACATION SCHEDULED AND TWO DAYS BETWEEN SHIFT.THIS IS THE REASON FOR A 3 DAYS LAPSE BELOW.DOCTOR STATED SHE WAS ABLE TO RETURN TO WORK.

EMPLOYEE WAS JACK HAMEMRING CHUNKS IN CLINKER COOLER WHEN SOME SMALL PIECES OF CLINKER FLEW BACK AT HIM HITTING HI EXPOSED RIGHT ARM. EMPLOYEE SHOULD HAVE BEENWEARING PPE.

EMPLOYEE WAS INSTALLING LIGHTS ON GRAVEL BED DUST COLLECTOR WHEN HIS FOOT CAME IN CONTACT WITH HOT METAL CAUSING A BURN TO HIS FOOT BOTTOM HE IS A IABETIC & DOES NOT HAVE GOOD CIRCULATION IN H IS FEET

USING COME-ALONG, HE PUT SILICONE ON DOOR, BENT DOWN AND HIT THE CRANE START BUTTON WITH HIS KNEE. INJURED WAS HOLDING COME-ALONG AND THE FORCE BENT RIGHT HAND BACK RESULTING IN A CHIPPED BONE IN BASE OF RIGHT THUMB. WAS WORKING ON A DOOR ON #1 RAW MILL. RESTRICTED TO NO WORK WITH RIGHT HAND FOR 7 DAYS.

EE WAS INSTALLING V BELTS ON PUMP ENGINE AND HIS SHOULDER HIT THE STARTER BUTTON CAUSING THE ENGINE TO TURN OVER EE S LEFT HAND WAS HIT BY THE FAN PULLEY CUTTING OFF END OF MIDDLE FINGER AND B REAKING TWO OTHER FINGERS.

EMPLOYEE WAS GRINDING ON A HAMMER MILL IN THE SHOP. WHEN A PIECE OF STEEL FLEW IN HIS RIGHT EYE. EMPLOYEE WAS WEARING HIS SAFETY GLASSES.

EMPLOYEE WAS GRINDING WELD OFF OF TRUCK BED WHEN METAL SPARK BOUNCED IN BEHIND FACE SHIELD & GOT INTO RT EYE EMPLOYEE WAS GIVEN ANTIBIOTIC DROPSFOR EYE

EMPL WELDING & GRINDING IN ROLLER MILL.A PARTICLE OF DEBRIS FLEW INTO LEFT EYE.

EMPL WAS TRYING TO DISLODGE AIR LANCE FROM TRIPPER WHEN HE STRAINED MUSCLES IN RIGHT SHOULDER. THIS IS BEING REPORTED BECAUSE EMPL DID NOT SEE MEDICAL HELP UNTIL 9/3. TREATMENT AT THAT TIME WA S MEDICATION ONLY. DR HAS NOW REQUIRED PHYSCIAL THERAPY.

WORKING AT #1 PRECIP HOT FEED FELL ON ARM SIDE OF FACE & SIDE OF CHEST

USING SUPER SUCKER LINE CAME APART AND DUST GOT INTO EYES.

EMPL PULLED DRILL STEEL TO CHECK THE BIT.THE COLLAR CAME UP WITH THE BIT,EMPL REACHED TO UNWEDGE THE COLLAR AND IT FELL PINCHING INDEX FINGER BETWEEN COLLAR AND DRILL TABLE.AN X-RAY REVEALED A FRACTURED LEFT INDEX FINGER.DR APPLIED TAPE TO THE FINGER AND ALLOWED EMPL TO RETURN TO WORK WITHOUT RESTRICTIONS.

AFTER CHANGOUT OF GRINDING WHEELS, THE TOOL RESTS WERE REPOSITIONED FOR MANDATORY 1/8 INCH CLEARANCE. A GAP OF 1/2 - 3/4 INCH CLEARANCE EXISTED. ANOTHER EMPLOYEE WAS ATTEMPTING TO GRIND ROUGH EDGES OF A 1/4" PIECE OF FLAT IRON AND EDGE OF METAL CAUGHT WHEEL, THRUSTING IT INTO GAP. EMPLOYEE'S THUMB WAS THRUST AGAINST WHEEL AND RIPPED OFF THUMBNAIL.

DIRECTING DOZER TO PULL OUT HIS DOZER, IT S BLADE CAUGHT TREE AND PUSHED IT DOWN HIT HIM ON R SIDE OF BODY

USING IMPACT WRENCH AIR TOOL STAINED TEDNONS IN R ELBOW

EMPLOYEE USED A BURNING TORCH TO URN OUT A SECTION OF RAW MILL SHELL FOR RE-WELDING. TO SMOOTH OFF ROUGH EDGES OF CUT USING A HAND GRINDER, SPECK OF DIRT PENETRATED INTO EYE, CAUSING IRRITATIO N TO EYE AFTER REMOVAL-NECESSITATING PRESCRIPTION.

OPERATING 65 D BUCYRUS CRANE WHEN CABLE BROKE AT CROWS FOOT ON TOP OF THE BUCKET AND CAME BACK OVER BOOM CAUSING BRUISE TO RIGHT KNEE.

EMPLOYEE WAS USING A HAND DRILL. THE DRILL SLIPPED AND THE BIT WENT INTO FINGERS.

EMPLOYEE WAS WELDING OVERHEAD ON THE CRADEL FOR A TCD WHEN SLAG FELL HITTING HIS PANT LEG CAUSING A BURN TO HIS RIGHT INNER LEG.

EMPL ROLLING EDGE DOWN THE HILL.DOZER GUIDED TO THE RIGHT AND ROLLED OVER ONCE.EMPL WASNT WEARING A SEATBELT. DIS.BEGAN 1-20-91.

EMPLOYEE WAS JACKHAMMERING AND HURT MIDDLE OF BACK

OPER GRADER AT P LANT, PINCHED NERVE IN BACK

OPERATING 7400 DRAG HIT LEFT HAND ON VISE IN DRAG.

INSTALLING COVER ON PORT AIR COMPRESSOR WHEN FOREIGN PARTICLE BLEW IN EYE

I NAME WAS CUTTING A BIN APART A SMALL PIECE OF RUST FLAKED OFF & LANDED IN HIS LEFT EYE I NAME WAS TAKEN TO THE EYE DOCTOR & THEN RETURNED TO WORK THE SAME MORNING

EMPL WAS WELDING ON FEEDER AT CRUSHER PLANT & STOPPED TO CHIP SOME METAL SLAG. SPECK FROM SLAG GOT INTO EYE.

TWO WELDERS WERE WELDING A CHUTE OPPISITE EACH OTHER. ONE WELDER RECEIVED WELDING FLASHBURN TO THE EYES.

EMPLOYEE WAS HELPING REMOVE CHUNKS IN THE CLINKER BREAKER. HE IMPROPERLY LIFTED JACK HAMMER AND STRAINED LEFT CHEST WALL.

EMPLOYEE WAS BUILDING OFFICE STRUCTURE WHEN A CHIPPING HAMMER SLIPPED.

EMPLOYEE WAS PREPARING 2IN PIPE FOR MULTIPLE PASS WELDING WHEN PARTICLES FLEW UP LODGING IN RIGHT EYE EMPLOYEE SHOULD HAVE BEEN WEARING FULL FACE FLIP-UP TYPE HOOD OR FULL COVER GOGGLES

EMPLOYEE WAS GRINDING ON A TOOTH ON AN END LOADER AND A SMALL PIECE OF DEBRIS GOT IN HIS LEFT EYE. EMPLOYEE SHOULD HAVE HAD GOGGLES OR FLIP SHIELD ON TO PROTECT HIMSELF BETTER.

EMPLOYEE HAD DUMPED LOAD OF ROCK INTO HOPPER OF PORTABLE RIP RAP PLANT.A LARGE ROCK GOT HUNG UP AND HE WAS GOING TO ASSIST PLANT OPERATOR WHEN A PIECE OF ROCK BOUNCED OFF FLYWHEEL OF CRUSHER A ND HIT EMPLOYEE IN LEFT EYEBROW.

EMPLOYEE WAS USING A HAND DRILL. THE DRILL BIT GRABBED AND DRILL SPUN AROUND AND CUT HIS KNUCKLE.

EMPL WAS CHANGING SCREENS AT CRUSHER PLANT USING AN AIR IMPACT TOOL THE AIR HOSE POPPED OFF HITTING EMPL ON L CHEEK THE FORCED AIR FORM THE HOSE HIT CORNEA IN L EYE

EMPLOYEE WAS OPERATING BULLDOZER AND CUT FINGER ON A SHARP PANEL.

EMPL WAS PACKING BAGS ON SOUTH PACKER WHEN FIVE BAGS BLEW APART IN ROW. DUST EXPLODED IN FACE EMPL WAS WEARING SAFETY GLASSES.

EMPLOYEE WAS PACKING CEMENT WHEN A BAG BROKE AND DUST WENT INTO HIS EYES.

EMPLOYEE WAS CUTTING PLATE STEEL WITH TORCH WHEN A PIECE OF STEEL FELL ON LEFT FOOT.

EMPLOYEE WAS HELPING TIGHTEN BOLTS WITH A SLUG WRENCH.HE WENT TO REPOSITION THE WRENCH AT THE SAME TIME THE AHMMER OPERATOR LOWERED THE AHMMER.THE AHMMER HIT THE EMPLOYEES LITTLE FINGER OF LEF T AHND.

EMPLOYEE WAS AIR-ARC WELDING/CUTTING WHEN A PIECE OF HOT METAL FROM THE OPERATION FELL INTO HIS BOOT BURNING THE BACK OF HIS LEFT HEEL.