Search the record

Slip lead to sprain of right foot. Restrictions imposed

The aero phine bulk storage tote was leaking. The employee checked the tote level and slipped, breaking both ankles.

Dismounting D11 Dozer in the Truck Shop.

Weather: sunny, haul road ground conditions with medium-sized rock in the road.

Pulled a muscle while walking and bending over on the blast pattern.

Below freezing temperatures, leading to icy areas on the slope. The employee fell, jarring their back.

Employee was exiting a Bobcat Skidsteer loader and rolled their left ankle.

Employee was walking and twisted ankle.

EE was changing liners and EE's harness caught on something, knocking EE off balance, EE slid down and EE's foot hit a ledge breaking EE's heal bone.

Employee was Pulling drip line on pad 4 rehandle. Coupler gave out causing employee to fall backwards. During fall employee twisted left knee and was not able to put full weight on that leg after fall.

Mill operator fell causing lacerations.

Stepped off of a Track Dozer while the dozer was on a tow haul trailer and missed stepping on the trailer and falling to the ground

Employee was walking slope on a leach pad and plumbing solution pipes. While walking on the slope the material was wet and caused the employee to slide and then tumble down the slope. The employee had a strained neck and right ankle due to the incident. The Doctor recommended that the employee take three days off of work.

The employee (EE) was using a paint stick to begin marking boot holes following a heading inspection. The EE's right foot slipped on uneven ground causing their weight to shift left. The left foot also slipped, and the EE began to fall to the ground. A rock came between the ground and leg just above the left calf area. The impact resulted in a fracture to the lower left fibula.

While dismounting the grader, the operator lost grip and fell.

While working in a squatted position on an engine at ground level, Mechanic lost balance landing on a pipe.

Employee was opening a valve, and the valve lever broke causing the employee to fall to the ground. Employee was seen at Aspen quick care in Spring Creek, NV. X-Rays revealed that the employee had a fractured coccyx. the employee was released to full duty and will return to work on next scheduled shift, June 15th.

Employee was dismounting a track dozer and tripped forward and felt the knee pop and was taken to Hospital in Ely, NV. Xray performed with negative findings and released to full duty with. Followed up with Ortho and MRI was completed on 04/23/2024. MRI results read on 04/24/2024 with the ACL and meniscus was damaged. Released to restricted duty on.

Employee was walking back to work area after lunch. While crossing the roadway they slipped on the ice and broke their tibia.

Employee was walking down a 6060 cat shovel with a small box. EE fell approximately 7 steps to the ground. This resulted in the employee sustaining some scratches to their stomach, knees, and face. Along with breaking their jaw.

While attempting to enter the cab of 460E the operator inadvertently stepped backward off the deck of the truck and fell to the ground landing on their right side.

While placing traffic cones for delineation employee slipped and fell causing the cones to strike their hand.

Preparing and setting up a vac truck to preform work.

Employee slipped and fell due to snow on the ground resulting in a distal fibula fracture.

Employee was walking when they stepped wrong and twisted their knee on 11/28/2022. On 12/21/2022, it was determined that the employee needed surgery due to a torn meniscus.

Walking around equipment and slipped on frozen ground

Employee lost their balance and fell forward resulting in a laceration on their forehead.

Miner entered a concrete enclosure to adjust valving to change flow locations. While entering enclosure miner placed left foot on manifold piping. When miner removed right foot from access ladder, left foot slipped off piping landing approximately 18 to 24 inches to floor level hyperextending left knee resulting in a strain to the left knee.

Driller assistant was assigned to change the chuck and foot-clamp jaws on the drill rig. EE stepped onto the deck to evaluate and when EE was dismounting the deck, the GFCI for the lights tripped out and is when a slip and fall occurred. This when the individual slipped and fell onto the deck. Contact was made with the deck and individuals lower back.

While attempting to move a barrel to a pallet in the back of a light duty truck the employees hands slipped cause employee to fall.

while employee was walking to their vehicle after shift the employee had a slip and fall in the employee parking lot.

Operator had a fall of the same level after stepping on a rock walking to equipment

Operator was dismounting water truck when EE missed the last step and sprained knee when EE's foot hit the ground hard.

Case began as a first-aid only case on 05/25 and was modified to reportable injury on 07/07. Laborer using a vice grip clamp attached to the liner to help guide the liner. The employee tugged on the liner and the clamp came loose. The employee lost their footing and fell backward on the slope. The employee braced themselves with their right hand and received a strain to the wrist.

Employee fell during a line out meeting and broke a front tooth.

Surveyor was walking across uneven ground and twisted a knee.

As an employee was walking they slipped and fell on their shoulder due to ice on the ground. On 1/2/2021 it was determined that the employee had a fracture of the humeral head.

An employee was stepping out of a blue room and twisted their knee. On 1/6/2021 the employee was given work restrictions due to a torn meniscus.

While walking down hill to a drill site being constructed employee twisted right ankle.

While replacing swing relief valves on a hydraulic shovel, employee stepped off one level of a cat walk onto another approximately eight inches without realizing. The elevation change caught the employee off guard and they fell onto a grease tank contacting the left arm.

An employee stepped out of a truck and twisted their ankle.

Dismounting haul truck, slipped and fell. Injuring right leg. Upon further medical evaluation, resulting in hair-line fracture of right fibula.

An employee fell and contacted the ground causing pain in their back.

As an employee was walking backwards they tripped and fell landing on their arm. It was determined that a tendon was torn. On 2/3/2020, the employee had surgery to repair the tendon.

Exiting locker connex, employee stepped into a small hole, rolling their left ankle.

Drill pattern had been filled in had a snow event. Snow covered a dip where employee could not see a hole stepped in it and fell injuring right ankle.

Employee was exiting van when they slipped on running board and fell to ground. Injured their right leg, resulting in fractures to the right leg.

Supervisor dropped employee off at the pad to run dozer. Employee walked toward dozer when employee felt their feet slip on the snow pack and fell twisting ankle. Initial trip to hospital showed no break, employee returned to doctor due to pain in ankle and the stress fracture was found on Feb 19, 2019

An employee tripped and fell causing pain in their knee.

Employee felt pain in their shoulder when they slipped and fell while stepping across a ditch on 1/2/2019. Employee felt reoccurring pain and on 1/27/2021 it was determined that the employee had a rotator cuff tear consistent with the 1/2/2019 incident.