Search the record

A hydraulic hose on the excavator burst and broke the side window of the machine. The operator had cuts on his face from pieces of glass.

Employee was walking on uneven ground and twisted his right ankle.

A Buchta truck driver was cleaning out the bed of his semi. He lost feeling in his left arm and fell. He had pain in his back and left side.

Employee was picking up a fuel can and twisted wrong, causing an unpleasant pain in his back.

The employee was working on a conveyor near a stockpile, He walked into a piece of steel he had in the JLG basket and cut his lower lip.

employee was untangling cables on stiff leg crane bucket and stepped on a piece of aggregate which twisted his ankle

The employee was doing inventory on material piles. He lost his footing on the loose material and twisted his knee. He suffered severe pain and was transported to the local hospital.

Employee was poking dust out of a hole in a dust hopper and material/debris fell into his eyes. There was no ill effect until the next day. Employee went to the doctor and had debris removed.

Employee left a hand written note saying he hurt his knee climbing on stiffleg crane bucket to grease it. The employee stated the next day that it was an existing old injury and that he must of aggravated it. He was in the process of having the knee looked at with his doctors before the work incident.

Subject was working on Northwest 180D shovel bucket when he slipped and fell across a block of wood on his back

Our customers contract hauler slipped and fell while climbing on his trailer to remove tarp bows. He fell onto a bracket on the side of the trailer cutting his leg at the thigh area. The cut was about 3in. long X 0.75in. deep. 911 was called and the victim was taken to emergency room. The victim was an employee for Go-Ko trucking federal I.D. #35-1824252.

Employee was helping install a 1200 foot boom cable. We needed about another 6 feet and we decided to pull it by hand and I must have strained my back or pulled a muscle.

Employee was trying to pry a clinker out of #5 kiln cooler when he felt a pull in his lower abdominal area. He didn't say anything about it. Employee went to his personal doctor on Tuesday 7/6/10 but said nothing to any supervision until 6:30pm on 7/9/10.

Employee was welding on coal plant structure and when he started to chip off the slag, a piece went under his welding helmet and under his safety glasses and into his left eye.

Subject was moving scrap metal pieces looking for piece of metal big enough to repair blackjack gear guard. When subject picked up piece of metal he felt sharp pain in right side groin area.

Subject bent over to pick up steel and had muscle spasam in lower back.

Screenplant crew was changing the closing cable on stiffleg. Employee was standing on the stiffleg bucket guiding the cable through the sheave when it flipped out and hit him in the face.

Employee was checking the heater in the #2 Euclid haul truck to see if it was blowing out heat. The employee's foot slipped and to catch himself he grabbed the heater unit with his hand and his finger went into the rotating blower fan and cut his right ring finger.

Employee was disconnecting frozen water lines from stockpile. When he was coming back down the face of the stockpile the employee slipped and slid approxmately 20 feet to the bottom. He called the office with his cell phone to tell that he couldn"t get up he had hurt his back.

Subject was working on the #4 kiln scrubber when he fell into a corner of the ID fan striking his head on a piece of angle iron.

EE was running the dozer and stopped to go to the restroom. When he returned there were some rocks laying next to the dozer and EE tried to move them and strained his back.

Employee was going to the pond pumps to restart after power outage. He drove the Volvo loader out to where the pumps were located and when he got off of the loader he got a sharp pain in his groin area. When he returned to the bathhouse he notified the plant manager of what happened and the manager sent a co-worker to take him to the emergency room.

Subject was getting off of Pettibone crane and struck right hand on machine outrigger.

Subject was welding on the stiffleg bucket when a piece of slag hit him in the eye while he was wire brushing it off. Plant supervisor was notified by telephone at approxmately 8:30A.M. on Saturday 5/31/08.

Individual was climbing up steps of #7 haul truck and pulled something in his shoulder.

Subject was climbing up ladder on 988B front end loader when he slipped and fell off loader. Subject tried to break his fall and hurt his hand when he hit the ground.

Subject was restringing the stiffleg bucket with new cable. While doing this he pulled something in his abdomen.

Employee was changing a screen on the Seco shaker. The catwalk on which he was standing collapsed falling through causing injury to his right hand and arm, head, back and ribs.

Subject was doing service on back pier of #4 kiln. When he came down stairs after servicing back pier he slipped down stairs hurting back.

Subject was working on stiffleg crane when a piece of steel fell from above striking him in the right knee

Subject was carrying a piece of steel down a stairway and fell mashing his right hand middle finger between the piece of steel and stair step.

A Hinkle truck driver delivering coal to this facility was weighing in at office. When he got out of his truck, he slipped off truck and fell on sidewalk.

Sparks from torch while working on Northwest shovel must have gotten into welding truck seat setting it on fire. When employee tried to open the door he lost his balance getting two fingers caught in door handle cutting right middle finger.

Subject was operating stiffleg crane. Started to open window, hand slipped and hit window breaking the window cutting hand.

on aug 13 06 around 10:50pm i was out getting a sample of material to check weights, as i got sample i turned to head back in on the burner floor. when i started to walk back in something caught around my foot and caused me to trip. when i fell i tried to catch myself and hurt my wrist.

had a wrench on the bolt, pipe on the wrench while pulling on the pipe and wrench, wrench slipped off, lost balance and sprained knee.

was trying to take a part off an old machine and reuse it when he struck his hand between thumb and index finger with a hammer causing laceration requiring two stiches.

employee was climbing down from loader, foot slipped off ladder rung, he grabbed hand rail and twisted back

Employee was cutting a piece of chain with a cutting torch when a particle of rust went under his safety glasses into his left eye.

EMPLOYEE WAS CLIMBING STEPS WITH MUDDY FEET. FOOT SLIPPED ON STEP & HE GRABBED FOR HANDRAIL. THE HANDRAIL GAVE WAY CAUSING EE TO FALL TO THE GROUND. THESE STEPS & HANDRAIL WERE UNDER CONSTRUCTION & EE WAS AWARE OF THIS.

He was blackjacking gears on crusher when the gears grabbed the grease paddle causing the paddle to kick back and smack the top of his right hand.

Employee holding a pin to drive another one out. Piece of metal flew off shaft after being struck by hammer. Metal piece struck employee in upper left cheek, cutting cheek.

UNDER BAGHOUSE, TRIED TO CATCH THE AUGER COVER FROM FALLING INTO DUST, SLIPPED OFF LADDER.

EE USING CUTTING TORCH-HOSE BLEW CATCHING GLOVE ON FIRE, BURNING FINGERS, HAND & ARM

EMPLOYEE WAS WORKING ON WATER CONNECTION UNDER COAL MILL. UPON CRAWLING OUT FROM UNDER COAL MILL, HE HIT HEAD ON PIPE WHEN HE STOOD UP.

EE WAS USING HAMMER & PUNCH BREAKING BRASS RIVETS OUT OF STIFFLEG BRAKE LINER. METAL SLIVER WENT INTO LEFT EYE. HE TOOK OFF SAFETY GLASS TO WIPE HIS EYES OF SWEAT, DIRT/RUST AND MAY HAVE RUBBED SILVER INTO EYE.

EMPLOYEE INTENDED TO STRIKE A CLAMP ON PIPE TO REMOVE WITH HAMMER. STRUCK RIGHT LITTLE FINGER INSTEAD.

HOLDING A STEEL BAR FOR A WELDER AND GOT A FLASBURN IN BOTH EYES.

CLINKER CRUSHER PLUGGED UP, EE RAN TO SHUT IT OFF, SLIPPED IN A HOLE, TWISTED KNEE.

DRIVING SHALE HAULING TRUCK. HIT ROUGH BUMP-JERKED NECK. SORE/STIFF NECK-RIGHT SIDE.