Every injury and fatality MSHA has on file. Filter by state, year, sector, classification, experience, or any keyword from the investigator's narrative.
Email me when a new incident matches these filters. One confirmation email; unsubscribe anytime.
Injured was operating shuttle car and hit knee against deck.
Injured was operating scoop when it was struck by shuttle car causing injured to complain with back pain
Injured stepped on loose material and twisted right leg.
Injured was riding on mantrip when rock flipped up hitting left foot and knee
Injured was trying to square hook back together when it slipped hitting right little finger.
Injured was walking down belt line and left knee gave out.
Employee was taking a 4" valve out of a pipe when the pipe came loose and caught his hand between the 4" pipe and an adjacent sump.
Injured was moving crib blocks and strained stomach. Did not report until 1/7/12.
Injured was taking slack out of miner conveyor chain and when he stood up he felt pain in right knee. (reported 1/7/12)
Employee was opening gate, tripped on gravel, fell to ground, hit left ribs, hip, leg
Injured strained back while lifting miner cable. Did not report until 12/14/11 - Started missing 12/13/11.
Employee stated that he was putting together 4 inch waterline, and as he was clamping a coupling together the clamp sprung back and hit the index finger knuckle and middle finger knuckle of his left hand, employee stated that he was wearing his gloves.
Injured was shoveling belt when shovel caught belt causing handle to hit injured in head.
Injured was operating miner when piece of rock fell off shuttle car striking injured on Rt foot.
Roof fall (20'L X 18W X 8'H). Roof fall in intersection adjacent to 1 south belt 1 brk outby spad 286.
Injured was prying rock out of shuttle car conv. boom when slate bar caught left hand between shuttle car and slate bar. *Started missing work on 10/10/2011.
Injured was sitting beside bolter when roof straps slipped off bolter striking left hand.
Employee walking down steps felt dizzy, caused by low blood sugar. Tripped on steps and fell, twisted right ankle.
Employee using pitot tube to measure air in a mine fan. The pitot tube got too far into the fan, the employee lost his grip on it and the pitot tube whipped around and smacked the employee's hand.
Elevator down due to car brake hanging when car coming to landing - car repaired on 7/28/11 at approximately 1:00pm.
Hoist brake car would not operate safely due to coil/contactor being bad on braking system. Contactor replaced and car was operational at approximately 6:00 am on 7/27/11.
Elevator went down - would run on inspection mode. Repaired ground wire - fixed on shift.
Encoder went down on elevator causing elevator not to run on automatic but in would run inspection speed. Replaced encoder and machine operative on 7-21 around 1:00p.m.
While working on overcast, pulled something in back
Employee was carrying belt tools and strained back.
Employee was changing shut off value at tail piece as he tighten up value nipple blew off and hit employee in the right knee.
Injured tripped over cable and strained right wrist.
Injured was unloading mtl (angle iron) when angle iron slipped catching finger between angle iron and side board of supply car.
He was at oil station and opened a can of oil. The lid popped up and hit him. Cut left arm. (Note: EE and mine are on vac at this time).
Injured was helping hand mrs cable when he tripped over cable straining left foot.
A piece of tin fell from overcast and struck employee in the back.
50L x 20W x 5H rock fall in #4 entry inby 0536 (Spad) on 1 south belt.
Injured was unloading trash when trash slipped off flat car injuring foot. did not report until 7/20/11.
Roof fall in #9 entry (120' long X 19' wide X 8-10'high) in #8 south.
Crossing through man door and tripped man door fell and hit leg.
Employee reported that he stepped off a mantrip into water and stepped on a piece of rock or coal and twisted his right ankle.
70' X 19' X 7' fall in #4 entry on #2 belt near spad # 898.
Fall was discovered in the #7 entry @ brk. 94 in 3 South inby.Spad# 1475. The fall was approx. 50' L. X 19' W. X 5-6' H.
Employee was reach on a roof bolter and cut arm on mine strap.
Hoist experienced problems with solenoid on actuator that controls drum brake, causing hoist to not operate at all times. Men were withdrawn from mine until hoist was repaired at approximately 11:55 PM.
Injured was loading resin on roof bolter when he felt pain in chest.
Injured was operating shuttle car when he hit hole causing head to strike canopy.
EE opened air lock doors and the second door closed on him.
Injured was moving miner cable and slipped and fell, straining lower back.
Skiving mining belt knife slipped out of belt and cut left middle finger.
Injured was putting roof bolt supplies on when it moved, running over left foot.
Injured was moving miner cable when he felt pain in back. Did not start missing until 1/17/2011
EE got his right arm caught in the man door and jammed it into rib.
Drum brake locked up on hoist due to interlock being frozen.
Employee was spot bolting and left his hand on tray of bolter. A piece of rock fell on his left hand.