Search the record

EE was checking the hydraulic oil level; he lost his balance and fell from the dozer platform.

Employee bent over, to move a dozer roller, and felt something pull loose in his chest, in the front, on the right side.

Occupational hearing loss.

Employee was walking towards warehouse slipped on ice covered walkway twisting left ankle.

Employee was helping to unload chemicals from tractor trailer, driver dropped pallet on right hand.

Injured employee was stepping off bulldozer and twisted foot on dozer track, pulling a ligament in his right knee.

Employee was checking stuck roller glove got caught pulled hand and arm into roller and belt.

Repairing water line turned and got a stick in his eye.

Taking gate up on #2 and #3 bin, slipped and struck right knee on rail.

Employee was removing a bearing from a centrifugal dryer when the bearing slipped, employee caught the bearing resulting in a cut that required stitches.

Injured employee was removing the chute from a coal dryer and twisted his right knee.

Injured employee was operating an excavator on the slate. He swung the bucket around and caught a rock and jerked his lower back.

The driver backed up in stockpile to dump coal and turned over.

Crank handle on spray bar struck right hand, resulting in a cut to the right index finger that required stitches.

Tripped over crossbeam support and while falling reached for beam to stop fall, resulting in pulled muscle in right arm.

Injured emplyee was carrying a barrel, stumbled, almost dropped the barrel and injured shoulder and neck.

Spinning drill steel & pulling down on it to remove stuck steel out of top when glove got caught.

While turning around in shuttle car to change directions, employee twisted his left knee.

Crawling while moving miner and twisted knee in the mud.

Miner's hand was on drill pot when right middle finger was caught between uneven top and drill pot which cut end of finger off between finger nail and first joint closest to fingernail.

Rock fell out between bolts & struck him in the head.

Operating scoop, tramming scoop with his hand behind deck and caught it against rib, causing loss of fingers (ring and pinky on right hand).

Employee was helping load track rail on scoop and pulled back.

Lifting a rock up off of miner, rock broke off causing him to fall backward onto the ground.

Trying to get drill steel out of top, the drill steel fell out striking him on the right hand.

Due to flooding conditions due to excess rain the seven foot drain pipe under the mine yard stopped up and water entered the portals. Resulted in water roofing at the #2 belt drive blocking all entries for travel.

Employee was removing bolts from a structure when a piece of draw rock fell hitting him on rt side of neck and shoulder.

EE was getting on a loader to load himself and his hand slipped and he pulled a muscle in his shoulder and elbow.

Employee was building stopping and a piece of draw rock fell hitting him on the right side.

While loading tools on Mac 8, the Mac 8 started to roll and ee hit left elbow on frame of Mac 8.

Loading scoop with top roller. EE threw roller into scoop and twisted his back.

Was setting steel on pot when rock fell hitting thumb. Rock measured 4" thick x 18" round.

No one was injured or any equipment involved. We have soft top conditions and low cover in this area. No cracks or water was present in this area during normal mining procedures.

Spot roofbolting and draw rock fell out beteen the roofbolts stiking employee in the head, neck, shoulder and knee.

While bolting, a piece of draw rock fell hitting him on face and neck area.

Foreman was making up roofbolts when draw rock struck him in lower back.

Employee was putting pusher & finisher together caught left index finger between steel, pinching end of finer off.

Another ee was going to tram 3-wheels when he went in wrong direction pinning EE against bolter.

Rib rolled onto right calf muscle while bolting.

As he was leaving office slipped & fell down steps & hurt back.

Bolting the top & started to drill a hole, loose rock came down and hit the employee.

Operating a 3-wheeler, tramming 3-wheeler when he hit #3 Bridge.

Victim was dropping miner cable in order to move miner, when cable was suddenly pulled by 3 wheeler, causing cable to bust loose from remaining hangers and strike him, knocking him down.

Roof fall 10-14 ft. high, 18 ft wide, 110 ft long.

An unplanned roof fall occurred in the return at spad No. 451. The fall measured 45' long x 18' wide x 6' thick.

Unplanned roof fall in return entry. Area cribbed and dangered off to prevent entrance by fellow employees. Fall was approximately 18' wide by 30 ' long and 3' to 4' thick.

Victim was tapping in a miner bit insert into the bit lug on the miner, when an object (likely a metal fragment), struck him in the right lower eye lid, then entering the eye. *Note: Victim was wearing eye protection*

Person was putting roof bolts up and got glue in right eye at #4 heading.

Running the loader to work, the road ran into a railroad track that was under the road. The operator's head hit the windshield of the loader and injured his head, neck and back. He was not wearing his seat belt.

Cutting bands off bundle of roof bolts. Band flipped back and cut right wrist.