Search the record

While walking towards the wrapping station, the employee unexpectedly twisted EE's ankle.

Twisted left knee on slick uneven ground clearing and dragging brush.

Climbing into the cab of the road grader EE's knee popped. Strained or pulled left knee.

EE tripped over the pallet that EE was placing bags on, causing EE to fall and land on their right hand, dislocating the 5th middle phalanx.

Customer truck driver was disconnected from their lanyard while working on the back of their trailer. The driver lost footing and fell 5 feet to the ground below.

EE slipped and fell on the ice cutting the back of EE's head.

EE tripped over the concrete cover by the Soda Ash Silo, while hosing down the pad, injuring left shoulder.

EE got something in eye at the start of shift putting stickers on bags.

Threw out left shoulder using sledge hammer. Pulled muscles in both upper arm/shoulder.

Employee was involved in a motor vehicle accident in a company vehicle. The accident occurred in Redding, CA. Employee was injured in the accident, transported to the local ER, treated for injuries and diagnosed with a possible fracture of the C-3 vertebrae. The accident is still under investigation by the Redding PD.

Employee was walking up the stairs to change the time on the printer. EE tripped and fell landing on left wrist. EE was taken to the emergency room and treated for the sprained wrist.

Walking into the plant to start work, slipped and fell on the ice and snow in the parking lot. Injured right elbow.

Bringing paperwork to office slipped and fell on ice injuring right shoulder.

Employee was welding and grinding and got a foreign body in right eye.

Employee was burning brush and slipped and fell on the ice landing on EE's left shoulder.

Employee was clearing brush when a branch sprang back and hit EE in the face, knocking EE's hard hat and safety glasses off. Injury occurred to left eye.

employee tripped over bulk sack cord while filling bulk sacks. Fell on right knee & wrist on concrete floor

Employee was hooking up bulk sack at filling station and bumped knuckle on frame causing swollen knuckles.

Employee was shoveling dirt near kiln area during strong winds. Wind blew material back into employee's face and into right eye. Material could not be effectively removed on site and employee visited doctor. Doctor was able to remove material. Resulted in scratched cornea in right eye.

Pulled muscle in arm shoveling.

Employee had arm extended all the way out and pulled sideways on a valve that was stuck and hurt right shoulder.

Missed step tried to catch self and pulled EE's leg.

EE was attempting to unclog a chute when right arm became trapped.

Pushing pallet of dica wrap onto a pallet and hurt left shoulder. (Popping noise in shoulder joint)

EE took an OTC pain reliever, not provided by the company and had an allergic reaction to it, which included difficulty breathing, dizziness, weakness and an itchy body. Dicalite has an AEMT II that took care of EE until the ambulance arrived. EE was given oxygen and an IV and was transported to the hospital. The Vacaville office advised Dicalite to fill out this report.

Employee turned EE's ankle walking to a fire drill.

EE was helping Maintenance Mechanics replace the teeth on the bucked of the 988H loader. They were striking the tooth with hammers when it splintered sending a piece of metal into EE's groin area.

Slipped injured knee and ankle/foot

Possibly exposed to arc welding from fellow worker; working on the opposite side of blower housing. Employee was wearing welding/cutting goggles.

Lifting a motor for installation.

Employee stated that there was a power bump in the system and they were running to see what happened and twisted their back.

EE was falling a tree and was hammering a wedge into the tree and when ee hit the wedge it flew out of the tree and hit ee in the nose.

Miner was bitten by a spider

Employee was removing a come along from a whizzer fan table and in the process the fan blade fell and hit employee's left hand. At a later time was swinging a hammer to bend the edge of screen felt a shift in employee's hand bones causing the hand to swell.

EE was whipping a pallet bag like you would a trash bag to open it, when EE whipped it EE was standing on part of the bag and as EE followed thru with the motion EE felt like it separated EE's left shoulder.

Employee was feeding straw into straw blower for reclamation work and hurt left shoulder.

Climbing onto back of pickup to go to lunch, slipped and landed wrong.

Contractor was hauling perlite ore to the Socorro Plant and as EE was dumping the ore would not slide out, the truck and trailer weren't parallel causing the trailer to flip on its side. After further investigation it was found that the tailgate was never opened.

Employee was striking a 4 inch pipe to spread the opening in the pipe. Striking with hammer causing the pipe to pop up hitting the employee in the mouth.

Employee was welding at the palletizer and got a piece of metal in eye.

Employees were installing new liners on dryer drum manually turning the dryer by hand. The drum began to move very fast. The injured employee grabbed the v-belt to attempt to slow drum down but his hand got hung up in the pulley.

Employee was putting 25lb bags of product into boxes and strained left abdomen.

Employee was wrapping pallets and got a foreign object in his right eye.

Employee was cutting and welding on to apron of 631 scraper. When lifting the loft sheet of metal twisted back feeling a sharp pain in lower back.

EE was on top of railroad car to move storm lids from opening on the car to prepare to move the car to the next loading position. He stated that he was moving the lid and slipped falling into the hopper car partially loaded. he did not have his safety belt on at the time of the incident.

Employee was fabricating a roll for the soda ash belt conveyor. While machining surface of roll on lathe a flying metal chip embedded in his left eye.

Employee was working on a forklift and got a small piece of metal in his left eye.

Employee was welding inside of pipe, and when moving forward to continue welding, he came in contact with a previous weld and burned his left elbow.

Employee had heat prostration.

Employee changing out a k-screen when rubbed arm against sharp corner of screen railing causing employee to cut his right forearm.