Search the record

The injured employee was using a shop drill press to drill holes in a piece of flat metal. During the drilling process several metal shavings had built up around the bit. The employee then reached in to remove the shavings away from the bit and as he pulled on one of them it sliced through his leather glove, cutting his left index finger.

The employee was opening a crate of shipping boxes. He removed the plastic binding straps and threw them on the ground next to the container. As he turned to walk away his feet became entangled in the straps that he had thrown on the ground, causing him to fall and land on his arm and chest.

The injured employee was placing a pump barrel on the bottom shelf. As she maneuvered it into place one of the other barrels on the shelf fell over smashing her finger between the two pump barrels.

The employee was cleaning the plant bathroom and slipped on the wet floor, striking the left side of his face/eyelid.

The injured employee was walking across the mill yard, stepped over a wash hose and slipped down.

After EE completed grinding a weld on a handrail with a 4" grinder, he raised his face shield and a small debris particle came off the faceshield, went between his eyebrow and glasses and got is his left eye. He missed one day of work for a doctor's exam to check his eye. He was treated and he was prescribed eye drops. There is no permanent damage to the left eye.

Employee was moving/adjusting an extension ladder. He got his left wrist in between the lower and upper rung sections of the ladder, resulting in a bruise to wrist. Taken to emergency room-xray (no fracture), velcro brace, ice, pain medication given. Light duty 10/20/05 (our last work day of week), full duty 10/24/05. Physician follow up visit 11/2/05.

EE was working in the warehouse, helping reorganize & clean the inventory shelves. As he was cleaning, a pump shaft rolled across an upper shelf, fell to the floor, bounced, and then struck him across his right hand, smashing his middle finger.

EE had placed a 55 gallon barrel in a barrel inverter. As he was pulling up on the handle to tighten the chain around the barrel to lock it in place, he felt a pop in his left shoulder.

The injured employee and his partner were transporting a welding machine from the bottom floor of the MVO building to the top floor. As EE was shifting the welder to fit through an opening he smashed his left hand pinky finger between the frame of the welder and the handrail around the hoist way opening.

Employee was removing old pump part from inventory that had been discontinued. As he was removing a casing for a galigher pump from the bottom shelf it fell over. EE stated he then reached down and tried to pick up the casing that had fallen. As he was trying to lift it up he felt a sharp pain in his neck and shoulder blades.

THE INJURED EMPLOYEE WAS OPENING A 2" WATER VALVE ON TOP OF A MIXER/SETTLER TANK. HE HAD REACHED OVER THE RAILING & BEGAN OPENING THE VALVE WHEN HE FELT A SLIGHT PAIN IN HIS UPPER BACK.

THE INJURED EMPLOYEE HAD RECEIVED A DELIVERY AT THE WAREHOUSE. UPON OPENING THE CONTAINER SHE DISCOVERED THAT THE PACKING LIST WAS UNDERNEATH THE PUMP PARTS. SHE REACHED DOWN & GRABBED THE LIST WITH HER RT. HAND & TRIED TO ROLL THE PARTS OFF OF THE LIST WITH HER LEFT HAND. AS SHE MOVED THE PARTS SHE FELT A PAIN IN HER LOW BACK, GOING DOWN HER HIP.

A PLANT MECHANIC WAS REMOVING A 3/4" CAP OFF OF AN AMMONIA LINE TO PURGE THE SYSTEM. HE SHUT OFF THE MAIN VALVE TO THE TANK BUT NEGLECTED TO BLEED THE PRESSURE OFF THE LINE BEFORE REMOVING THE CAP. THE CAP BLEW OFF ENGULFING HIM IN A VAPOR CLOUD OF AMMONIA. THIS RESULTED IN MINOR BURNS TO HIS RIGHT HAND AND CHEEK AND INHALATION INJURIES.

SEVERAL MECHANICS WERE USING AN ELECTRIC HOIST TO LIFT A PUMP UP TO THE THIRD FLOOR OF THE MVO BUILDING. AFTER HOOKING UP THE PUMP, THE INJURED STARTED UP THE STAIRS. AS HE REACHED THE SECOND FLOOR HE SAW THE PUMP HIT AN I-BEAM AND SNAP THE CHOKER, CAUSING THE PUMP TO FALL. HE RAN BACK DOWN THE STAIRS TO CHECK ON THE MECHANICS ON THE BOTTOM FLOOR AND FELT A SLIGHT PAIN IN HIS KNEE.

EE HAD SPOTTED A RAILCAR FOR UNLOADING, AND HAD CLIMBED UP THE LADDER ON THE CAR TO SET THE BRAKE. AS HE WAS TURNING THE BRAKE WHEEL ON THE CAR HE FELT A PULL IN HIS RIGHT SHOULDER.

THE INJRED EE WAS WORKING OUT OF A CRANE MANBASKET REPAIRING A FLANGE ON A WATER COOLING LOOP. HE ASKED HIS PARTNER TO HAND HIM ANOTHER BOLT FOR THE FLANGE, AND AS HIS PARTNER REACHED OUT TO H AND IT TO HIM HE LEANED AGAINST AN ACID LINE CAUSING IT TO START LEAKING AT THE NIPPLE TO THE FLOW METER. ANOTHER MECHANIC THEN TRIED TO SHUT THE ACID OFF AT THE VALVE, WHICH CAUSED THE NIPPL

INJURED EE & HIS PARTNER WERE REMOVING BOLTS FROM A FLOW METER ON AN OVERFLOW PUMP. AS EE WAS REMOVING LAST BOLT, HE WAS HOLDING THE HEAD OF THE BOLT W/HIS LT HAND & REMOVING THE NUT W/HIS RIG HT, HE FELT A SLIGHT POP IN HIS LT SHOULDER WHICH CAUSED HIS LT ARM & SHOULDER TO FEEL NUMB. EE WASN'T IN AN IMPROPER POSITION OR USING EXCESSIVE FORCE WITH HIS LEFT HAND.

THE INJURED EE WAS DRAGGING A 2" WATER HOSE USED TO WASH DOWN THE MILL YARD AREA. AS HE WAS DRAGGING THE HOSE ACROSS THE YARD IT CAUGHT UNDERNEATH THE WHEEL OF A PARKED FORKLIFT, STOPPING HIS MOMENTUM AND CAUSING HIM TO JERK BACK, RESULTING IN A STRAIN TO HIS LT. BICEP.

THE INJURED EE STRAINED HIS LOWER BACK WHILE INSTALL A WHEEL BACK ONTO A TRACK MOVILE THAT HE WAS PERFORMING MAINTENANCE ON.

THE INJURED EE WAS LIFTING 110 LB. FIBRE DRUMS FROM A PRODUCTION LINE AND PLACING THE DRUMS ON A PALLET. AS HE LIFTED ONE OF THE DRUMS AND SQUATED DOWN TO PLACE IT ON THE PALLET HE FELT A PULLING IN HIS GROIN AREA.

EMPLOYEE WAS AT STRATCOR TO UNLOAD. HE WAS GETTING OUT OF HIS TRUCK WHEN HE TRIPPED AND FELL. HEHIT HIS HEAD ON THE CONCRETE CAUSING A LACERATION.

THE INJURED EMPLOYEE WAS EXITING THE CONTROL ROOM. AS HE WAS LEAVING THE STATION HE STEPPED ON APIECE OF TRASH THAT WAS ON THE FLOOR, CAUSING HIM TO STUMBLE AS HE WENT OUT THE DOOR. THERE IS APPROXM A 10 INCH DROP FROM THE CONTROL ROOM FLOOR TO THE WORK AREA FLOOR, AND AS HE MADE THE STEP HE LANDED ON HIS LEFT ANKLE, RESULTING IN A MILD SPRAIN.

THE INJURED EE WAS CUTTING BAGS OF ASH FEED MATERIAL IN OUR MILL YARD, AND PULLING THE PLASTIC LINING OUT OF THE FEED STOKC PILE. AS HE WAS PULLING THE PLASTIC FROM THE STOCK PILEHE FELT A PAI N IN HIS LOWER GROIN AREA, WHICH RESULTED IN A HERNIA.

THE INUJURIED EE WAS CHANGING OUT A 5 GALLON WATER JUG LOCATED IN HIS CONTROL ROOM. AS HE WAS REPLACING THE EMPTY CONTAINER HE FELT A POP IN HIS NECK AS HE GOT THE CONTAINER CHEST HIGH, THIS P OP RESULTED IN A STRAINED TRAPEZIUS MUSCLE IN HIS LEFT SHOULDER AND NECK AREA.

THE INJURED EE HAD RELOCATED HIS KEYBOARD TO THE TOP OF HIS DESK IN HIS OFFICE. THE USE OF HIS KEYBOARD IN THIS POSITION RESULTED IN HIS WRIST BEING PLACED ON THE EDGE OF HIS DESK DURING DATA ENTRY. THE AWKWARD POSITION CAUSED IRRITATION TO THE TENDONS IN HIS RIGHT WRIST AND FOREARM.

EE WAS FUELING A FRONT-END LOADER AT THE FUELINGSTATION. HE TURNED TO WALK TO THE PUMP AND AS HESTEPPED OVER THE FUEL LINES HIS LEFT FOOT CAUGHTTHE LINE CAUSING HIM TO LOSE HIS BALANCE. AS HE FELL ALL OF HIS WEIGHT SHIFTED TO HIS RIGHT KNEEWHICH TWISTED UNDERNEATH HIM, CAUSING A STRAIN.

THE INJURED EMPLOYEE WAS REMOVING A HYDRAULIC PUMP FROM UNDERNEATH AN OIL TANK ON A HOODLOADER. HE OVEREXTENDED HIMSELF PULLING A SHOULDER MUSCLE AS HE TRIED TO REMOVE THE PUMP FROM IT'S BASE.

THE INJURED WAS CLIMBING DOWN A FIXED LADDER IN OUR PRODUCT PARKING AREA. AS HE EACHED THE BOOTOM OF THE LADDER HE MISSED THE LAST WRUNG, CAUSING HIM TO PUT ALL OF HIW WEIGHT ON HIS LEFT LEG K NEE AND LEG.

THE INJURED WAS LOOSENING BOLTS ON THE DISCHARGE FLANGE OF AN UNDERFLOW PUMP. THE BOLTS ON THE FLANGE WERE SLIGHTLY RUSTY AND HARD TO REMOVE, AS THE INJURED WAS TRYING TO REMOVE THE SECOND BOL T WITH WRENCH, HE PULLED A MUSCLE IN HIS LEFT SHOULDER.

THE INJURED EE WAS WASHING MATERIAL OUT OF A TROUGH AT THE END OF THE ROD MILL WITH A WATER HOSE. AS HE PULLED THE HOSE FORWARD IT BECAME INTANGLED IN A WODEN 2X4, HE THEN PULLED FORWARD AGAIN S WHICH CAUSED THE 2X4 TO KICK OUT AND GO INTO THE ROD MILL. THE MILL THEN KICKED THE 2X4 BACK OUT AT HIM, STIKING HIM IN THE SHOULDER AND GRAZING HIM ACROSS THE CHIN.

THE INJURED WAS INSPECTING THE LID OF A CLACINER, THAT WAS LOCATED IN THE SHOP. THE LID HAD BEEN TURNED UPSIDE DOWN SO THAT IT COULD BE INSPECTED AND NEW REFRACTORY WORK PERFORMED. AS THE INJU RED STEPPED OFF THE LID ONTO THE FLOOR HE STEPPED ON A PIECE OF BROKEN REFRACTORY CAUSING HIM TO FALL BACKWARDS. AS HE FELL HE CAUGHT HIMSELF WITH HIS HANDS, RESULTING IN INJURY TO R PINKY.

THE INJURED WAS ATTEMPTING TO PUSH 3 DRUMS OF MATERIAL BACK ON A PALLET TO KEEP THEM FROM FALLING OFF. AS HE PUSHED THE DRUMS BACK ON PALLET HE HAD TO REACH ABOVE HIS HEAD FOR THE TOP ROW AND STRAINED HIS LEFT SHOULDER.

THE INJURIED WAS REMOVING OVERSIZED MATERIAL FROM A FEED BELT. AS HE WAS PUSHING THE MATERIAL OFF THE BELT A PIECE OF THE MATERIAL THAT HAD ALREADY PASSED ROLLED BACK AND CAUGHT HIS RIGHT HAND INDEX FINGER BETWEEN THE TWO PIECES OF MATERIAL

THE INJ WAS USING A UTILITY KNIFE TO CUT PLASTICTIES OF A 55 GAL. DRUM LINERS TO ADD PRODUCT BACK TO EACH DRUM. THE INJ WAS HOLDING THE TOP OF THE ONE OF THE LINERS & CUTTING THE PLASTIC TIES OFF AS HE CUT THRU THE TIE THE UTILITY KNIFE BLADE CUT HIS LEFT HAND BETWEEN HIS THUMB & FORERFINGER