Search the record

LOWER BACK PAIN.

EMPLOYEE WAS WALKING DOWN STAIRS INTO THE DRYER ROOM. HE SLIPPED ON LAST STAIR AND SPRAINED ANKLE. HE MISSED 2 DAYS OF WORK, LOST TIME INJURY- REPORTABLE.

EE CUT LEFT INDEX FINGER WITH A BOX CUTTER WHILE OPENING A BOX. CUT REQUIRED STITCHES THUS CONSTITUTING MSHA REPORTABILITY.

EE WAS STACKING BOXES ON A PALLET. HE FELT A SHARP PAIN IN THE MIDDLE OF HIS BACK. LEFT WORK AND SOUGHT CHIROPRACTIC TREATMENT HTUS CONSTITUTING MSHA REPORTABLILITY.

WHILE STACKING A PALLET OF MATERIAL, EMPLOYEE FRACTURED LEFT WRIST.

EE WAS LIFTING PLASTIC JUGS FROM STACK FROM OVER HIS HEAD. SLIPPED BACKWARDS - FELT PAIN AND BURNING SENSATION IN GROIN AREA (RIGHT SIDE). LATER DETERMINED TO BE A HERNIA SITUATION BY DR.

EE WAS THROWING BAGS OF BENTONITE AND NOTICED HIS BACK BEGINING TO HURT. BY THE END OF THE DAY, HE WAS IN PAIN. HE MISSED WORK 1 DAY, 10-5-98, CONSTITUTING LOST TIME REPORTABLILITY.

EMPLOYEE WAS GRINDING ON A PIECE OF METAL AND A PIECE OF IT WENT INTO HIS EYE. (LEFT EYE).

EE GOT A SHARP PAIN IN THE UPPER LEFYT SHOULDER WHILE THROWING BOXES, ONTO A STACK HIGHER & HIGHER.

EE OPEING GATE ON TRAINCAR. IT GOT STUCK AND HE WAS USING A PRYBAR TO OPEN THE GATE. HE WAS PUSHING ON THE BAR WHEN THE GATE OPENED AND JAMMED HIS NECK BACK CAUSING PAIN AT BASE OF NECK. SUBSE QUENT CHIROPRACTIC VISITS CONSTITUTE REPORTABLILITY FOR MSHA REQUIREMENTS.

EE WAS CUTTING CARDBOARD. THE RAZOR KNIFE SLIPPED AND HE STABBED HIMSELF IN THE PALM OF HIS LEFT HAND. LACERATION REQUIRED STITCHES.

EE WAS LIFTING CHANNEL IRON ON TO ROOF. HE DISLOCATED HIS LOWER BACK. ***CHIRPORACTIC VISIT 4/9/98 DEEMED REPORTABILITY.

EE CUT LEFT SMALL FINGER WITH RAZOR BLADE KNIFE WHILE CUTTING SLITS IN LID TO OPEN IT ON A 5-GAL. PAIL.

REPETITION WORK RELATED TO PACKAGING CAT LITTER CAUSING SORENESS IN LEFT WRIST. EMP INSTRUCTED TO DO ALTERNATIVE WORK FOR 10-14 DAYS AND KEEP WRIST SPLINT ON AT WORK FOR IMMOBILIZATION OF INJU RED WRIST CONSTITUTING MEDICAL REPORTABILITY.

EE WAS CLIMBING UP & DOWN ON A STEEL STRUCTURE. WHEN HE GOT DOWN OFF THE STRUCTURE, HE TWISTED WRONG & FELT A PULL IN THE MIDDLE OF HIS BACK & WENT AROUND TO THE FRONT SIDE OF HIS CHEST.

ABRASION TO EYE. EE WAS LOOKING UP TO CHECK OUT NEW DEFLECTION SHEET WHEN A PIECE OF BENTONITE CLAY FELL AND WENT IN BETWEEN HIS GLASSES AND FACE, HITTING HIS RIGHT EYE.

EMP BENT OVER TO PICK UP A 5" ROUND PIECE OF PIPE WHEN HIS LOWER BACK POPPED.

EE WAS SEWING BAGS WHEN HE FELT A PAIN IN HIS LEFT SHOULDER.

EE HAD HIS RIGHT HAND ON TRUCK RAM WHILE TALKINGTO A TRUCKER. THE EE, UPON LEAVING, SLID HIS RIGHT HAND ACROSS THE RAMP CUTTING IT ON JAGGED METAL. THIS CUT DID REQUIRE STITCHES.

EE WAS THROWING 25# BAGS, TWISTED THE WRONG WAY AND FELT A POP IN LOWER BACK.

EE THOUGHT THAT POWER TO THE SEWING MACHINE WAS OFF SINCE THE BULB WAS NOT ON. HOWEVER, THE BULB WAS BURNED OUT AND POWER WAS ON. EE WAS THREADING THE NEEDLE WHEN THE MACHINE STARTED CAUSING T HE NEEDLE TO PUNCTURE HIS LEFT INDEX FINGER.

POWDER FROM TOP OF THE LITTER PURRFECT PACKER FELL INTO LEFT EYE OF EE WHILE HE WAS LOOKING UP AT THE SLIDE.

EE WAS MOVING BULKHEAD DOOR IN BOXCAR WHEN RIGHT HAND BECAME LODGED BETWEEN THE DOOR AND THE WALL OF THE BOXCAR. RIGHT HAND WAS BRUISED.

EMPLLOYEE WAS CLOSING BOTTOM GATE ON OPEN TOP CAR. WHEN GATE SLAMMED SHUT, WITH HAND ON LEVER OF GATE, THE JOLT CRACKED AN OLD FRACTURE ON HIS RIGHT HAND.

EE WAS WALKING FROM THE OFFICE TO THE PLANT, SLIPPED ON ICE & FELL CAUSING RIB ON LEFT SIDE TO BECOME FRACTURED.

EE WAS PULLING A BUNDLE OF EMPTYWARE JUGS AND TWISTED HIS BACK.

EE BENT OVER TO PICK UP A STRETCH WRAP ROLL. HURT LOWER BACK.

EE WAS CLIMBING UP LADDER TO CHECK GAUGES ON BAGHOUSE PIPES. THE LADDER WAS NOT POSITIONED PROPERLY AND WHEN EE LEANED OVER TO READ GAUAGE AND THE LADDER FELL OVER CAUSING THE EE TO FALL TO TH E GROUND.

EMPLOYEE WAS REMOVING INSPECTION DOOR FROM HAMMER MILL. HAMMER WAS LAYING IN OPENING, FELL AND HIT LEFT FOOT, BROKE LITTLE TOE.

EMPLOYEE WAS CUTTING OPEN A BOX OF LIDS AND TH EKNIFE SLIPPED AND CUT HIS FINGER.

WHILE THE EMPLOYEE WAS PULLING LADDER UP THE SIDE OF THE RAILCAR HE WAS BACKING UP AT WHICH POINT HE FELL INTO ONE OF THE EMPTY CARGO HOLES AND DISLOCATED HIS SHOULDER.

EMPLOYEE WAS CUTTING BOXES OPEN WHEN KNIFE CAME IN CONTACT WITH TWO FINGERS ON LEFT HAND. THE CUTS REQUIRED STITCHES.

EMPLOYEE WAS HLEPIN GTO GET THE GRANNY AUGER GOIN. WHEN MOTOR KICKED OUT, EMPLOYEE MANUALLY BACKED THE AUGER BY PULLING HTE V BELTS. WHEN MOTOR CAME ON, EMPLOYEES LEFT HAND WAS PULLED THROUG H THE SHEAVE.

EE WAS TURNING THE CUTTING EDGE ON THE FRONT END LOADER AND PULLED STOMACH MUSCLES WHILE LIFTING THE CORNER SECTION.

EMPLOYEE WAS TRYING TO GET SLIDE ON PACKER TO MOVE FREELY WHEN LEFT FOOT WAS PUT INTO PART OF SLIDE SLIDE RELEASED & LEFT FOOT WAS SMASHED

EPLOYEE WAS CUTTING SECTION SFROM 3" DIAMETER PIPE WHEN A 4' SECTION OF THE PIPE SWUNG DOWN OFF OF TRUCK BED, STRIKING HIM IN RIGHT KNEE AND PINNING HIS LEG AGAINST THE TRUCK.

EE WAS TRYING TO MOVE A BOXCAR INNER BULKHEAD DOOR, AS HE WAS PULLING ON THE DOOR HE APPARENTLY PULLED A MUSCLE IN HIS SHOULDER.

EE WAS ASSEMBLING A DIESEL ENGINE, SWUNG A SOFT HAMMER TO SET GEAR HOUSING ONTO ENGINE BLOCK. IMPACT OF HAMMER CAUSED HAND & ARM PAIN.

EE WAS LIFTING 55 BAGS OF CHEMICAL AND CAUSED A HERNIA.

EE WAS STEPPING UP ONTO TRACKS AND SLIPPED ON SNOW ON TRACKS. WHEN HE SLIPPED HE JARRED HIS NECK.

EE WAS THROWING BAGS ON TO A PALLET FROM THE CONVEYOR BELT. HE FELT A LITTLE BIT OF A PAIN IN HIS BACK (LOWER PART).

EMPLOYEE WAS ATTEMPTING TO TURN DIVERTER GATE BETWEEN TWO BELTS, FROZEN MATERIAL PREVENTED TRUNING. EMPLOYEE PULLED VERY HARD ON LEVER, FROZEN MATERAL LET GO SUDDENLY, CATCHING & IMPACTING HIS HAND (RIGHT THUMB) BETWEEN THE HANDLE & THE STOP. RIGHT THUMB WAS LACERATED & REQUIRED STICHES, DOCTOR INDICATES FRACTURE.

EE WAS REPLACING A BROKEN SACK OF PRODUCT THAT HAD BEEN LOADED ON A TRUCK TRAILER HE TRIPPED AND FELL FROM TRAILER, LANDING ON HIS RIGHT HAND, SPRAING HIS WRIST.

EE WAS USING A BAR TO LOOSEN MATERIAL IN JIG BED HE RAISED HIS HAND AND HIT A FLURESCENT LIGHT TUBE THE TUBE BROKE AND A PIECE OF GLASS BECAME EMBEDDED IN HIS HAND.

EMPLOYEE WAS CLIMBING LADDER ON LOADER TO GET IN THE LOADER, LOST HIS BALANCE & HIT HIS KNEE ON RUNG OF LADDER. HE RETURNED TO WORK OF 7/13/93. ON 10/1/93 HIS KNEE GAVE OUT AS HE WALKED ACROSS THE ROOM & HE IS AGAIN UNDER DOCTOR'S CARE AS A CONTINUATION OF THE ORIGINAL INJURY OF 7/7/93.

THE OPERATOR WAS WASHING THE WINDSHIELD ON A CAT 631 SCRAPER, WHEN THE DOOR SLAMMED ON HIS ARM. HIT LOWER LEFT ARM WAS PINCHED BETWEEN THE DOOR AND THE CAB.

EMPLOYEE WAS CUTTING METAL WITH CUTTING TORCH & METAL STARTED TO FALL WHEN HE REACHED FOR IT HIS HAND PASSED THRU THE FLAME OF THE TORCH IN HIS OTHER HAND

EMPLOYEE WAS CLIMBING LADDER ON LOADER TO GET IN THE LOADER, LOST HIS BALANACE AND HIT HIS KNEE ON RUNG OF LADDER.

THE TRAILER DECK HAD SNOW ON IT THE TRUCK DRIVER WAS HELPING ANOTHER DRIVER CLEAN OFF HIS TRAILER WHEN HE SLIPPED AND FELL FROM THE TRUCK, HE LANDED WITH HIS LEFT WRIST AND HAND CAUSING HIM TO FRACTURE HIS LEFT WRIST JOINT.

EMPLOYEE WAS STACKING BAGS ON A PALLET WITH BACK TO REJECTED PALLET. EMPLOYEE ON FORKLIFT WAS ATTEMPTING TO REMOVE REJECT PALLET WITH FORKLIFT & PUSHED IT INTO 1ST EMPLOYEES FOOT PINCHING HIS FOOT BETWEEN TWO PALLETS.