Search the record

The employee was changing screens on the plant and suffered a burn to the top of employee's right hand.

As injured employee was walking EE wasn't watching EE was going and EE's knee bumped the sledge hammer handle that EE had previously placed on the floor adjacent to the track mobile. The injured employee grabbed for the hammer handle to prevent it from falling to the floor and the same time the right ankle turned inward.

Employee was removing rock from a spill from a plugged chute when chute was free a rock rolled off from the chute hitting employee in the top of the hard hat. It became a lost time on Aug 16, 2016

EE was working outside using a 20lb sledge hammer to loosen material that was stuck inside the chute. EE went in to cool off. About 10 minutes after EE tried calling to get ahold of someone because EE stated was cramping up and skin was hot clammy and EE was shivering.

Employee put boots on in morning noticed bug bite at the end of the day at home.

Employee had been lifting and working in an awkward posture leading up to the incident. EE began to squat down and suddenly developed severe lower back pain. Employee states that it took quite some time to stand up due to the pain.

A Caterpillar D7 was used to push stripping material over the edge of the spoil pile during rainy, wet conditions and at night. The dozer operator stated that ee got too close to the edge and come to rest sideways, approximately 100' below. On April 7 it became a medical incident due to the employee receiving physical therapy.

Employee was working at the Secondary Plant on Station #2. They were sliding screens out. He was trying to lift himself up on to the end of the 2nd deck so he could help get the screens out. When putting all his weight on his arms, his right shoulder gave away and popped out of place.

Employee handling an approximately 50 lb. rock sample in a 5 gallon bucket - Employee set the sample down on the floor and said his back was hurting.

Employee was underneath a truck making repairs and his hard hat fell off - when employee reached to retrieve his hard hat he bumped his head, causing a small laceration to his head.

WHILE LIFTING THE PUMP/FILTER UNIT FROM ONE PORTABLE FUEL TANK TO ANOTHER THE EMPLOYEE FELT HE PULLED SOMETHING IN HIS BACK. THE EMPLOYEE CONTINUED TO HIS WORK DRIVING A TRUCK AROUND 0830 THAT DAY THE EMPLOYEE REPORTED THAT HIS LEG WAS GETTING NUMB AND HE WAS TRANSPORTED TO THE LOCAL CLINIC/HOSPITAL COR CARE.

Employee using a 2" water hose - Pulled hose to remove a kink from it and the released energy from the hose knocked employee off balance causing her to fall.

Employee picked up a pail containing a rock sample and strained his back.

Scale clerk was operating the 980G loader. While navigating a decline, the loader began to pick up speed. The operator panicked & could not locate brake pedal. While attempting to steer thru a curve, the operator steered too far to the right which deflected the loader to the left. Left front tire hit a soft low spot overturning loader into a settlement pond.

Employee was grinding on a crusher liner and some debris flew into his eye.

While investigating a problem with the pit belt beneath the 1 Jaw Crusher, employee tripped over a rock and fell to the ground.

(Note: the shift starts 6:00 pm through 6:00 am the following day). While removing a rock jammed between the skirt boards, the rock came loose and the bar moved unexpectedly pinching the employee's finger between the bar and the side skirt board.

While operating a loader employee felt pain in right groin area.

Employee slipped on ice in the parking lot and fell on elbows and back - Received a fracture to right clavicle bone.

Employee was loosing a coupling on a water hose and the wrench slipped striking the employee in the mouth, chipping a tooth.

Employee was walking on uneven surface to his vehicle, when he stepped on a rock and turned/sprained right ankle.

Employee was standing on dozer track, fueling dozer - Hand slipped from grab rail, employee fell backwards to the ground, bruising right heel.

Employee stepped from barge to the dock - twisting his knee.

While using a box cutter knife employee cut left leg, which resulted in 8 stitches.

Employee was pulling on a hose when his foot got caught on another hose on the ground. Employee tripped and landed on hands, resulting in a broken right wrist.

While installing liner in chute employee strained lower back.

Employee was installing idlers and strained left shoulder.

Employee sustained a metal splinter in right hand above thumb knuckle. Became reportable 7/26/2012.

Employee was pulling cable out of water and strained back.

Employee stepped on a rock and twisted right knee.

While removing worn manganese liner from Crusher Bowl Frame, one employee was driving wedges under line with hammer, the liner popped from it's position, hitting the employee on the lower left rib cage and then on the right foot.

While climbing back into track hoe, he stepped up with his left foot and placed both hands on the grab bars to pull up. He felt a sharp pain in the left arm between elbow and wrist.

Employee was sweeping underneath conveyor belt; conveyor pulled broom and employee's hand was abraded by conveyor belt.

Employee was stepping off a bench after cleaning a screen and sprained his left ankle.

Lifting buckets of crusher back and foot slipped forward and felt a pull in lower abdominal area.

Employee's foot was run over by a skid steer.

Employee was removing bolts from the conveyor legs. As the bolts came loose, the conveyor leg swung out and hit the ladder he was standing on and he fell.

Installing a water valve, slipped in mud and twisted back.

Employee's finger was caught between a chain and the conveyor.

Moving an electric motor up stairs, it started to slip, as he went to hold if from falling, strained his back. Did not seek medical attention until 7/26/07.

Cleaning material from under a conveyor when a rock fell and hit his knee.

Employee was using a hammer to knock a bearing out of its housing when a bearing fragment struck him on the hand.

Employee was using a torch. He pulled back on the torch and his glove caught fire, burning his hand.

Employee caught in the tail pulley as he was cleaning material from beneath it.

Prying stuck chunks of dirt with a pry bar and hurt shoulder.

Employee was lifting rocks and sustained a hernia.

Performing maintenance on a cone crusher. The head was being lifted, a weld broke causing the cone to fall and strike the employee's leg.

Removing shims from cone crusher, finger was caught and the tip was partically amputated.

Employee was running a maching when his thumb was caught between the shiv and the belt causing a fracture.