Search the record

Rolling Rock forward on table smashing thumb between 2 rocks.

Using Rock Splitter, Piece of Rock shot out from splitter and hit employee in the stomach.

When chipping a rock, a chip of rock came off hitting EE's left forearm

Picking up rock and another rock fell over smashing finger.

Piece of rock fell off top layer and landed on EE's hand between another rock.

Employee was running tumbler and rock went into bucket. Rock tipped over onto employees foot in front of steel toe where laces are.

When sweeping the floor, employee bumped finger on a metal dumpster.

Leaning over the belt to pick a rock up and the employee felt something pop in the back of the knee.

Employee had a piece of rock fall off pallet and hit EE in the back of EE's leg by EE's Achilles tendon. EE and another EE were working together. Other EE tried to give warning and stop rock from falling.

Using a sledge hammer and the handle cracked, cutting the right hand.

Operator of loader was taking slab of stone off conveyor. Slab shifted on forks, fell off of forks, hit the guard rail. Guard rail fell off and hit operator's foot.

Was walking to EE's car at breaktime. Stepped on black ice, slipped and fell on EE's back.

Had hand sitting by belt guard. Belt grabbed EE's left hand and pulled it under roller of the splitter.

Splitting slabs of rock - got hand caught under splitter

Employee was rolling rock on the splitter and the rock fell off the side of the splitter and hit EE's foot.

Use hand held grinder on stone - saw kicked back and cut EE's hand.

Standard laboring - stacking rock

Using ratchet strap that recoiled when releasing.

EE was using a hammer to correct the stone shape while holding veneer with left hand. While striking with the hammer, EE hit left thumb.

Employee was stacking rock and twisted the wrong way and felt pain.

Slipped on floor that had a small amount of water, near our incline conveyor that exits waste, due to rain. Hurt EE's left knee

EE smashed hand while operating splitter. EE was standing by the splitter afterwards and was very quiet. EE went to step away from the machine and lost consciousness from pain in hand - EE then struck head causing a gash above the right eye.

Chipping stone with a hammer and accidentally smashed EE's fingers between hammer and stone

Employee was picking up small waste rock from floor.

Slipped walking down steps into quarry. All weight shifted onto one leg at an awkward angle.

Employee was stacking rock coming off one conveyor to another. EE right hand got caught between roller guard and belt

Rock broke and smashed employees hand between 2 rocks on Splitter.

Stacking stone and lower back popped

Stacking rocks in pallet and pinched finger between two stones.

Employee stated that employee grabbed a rock off of the conveyor belt, turn to palatalize the rock and as employee did, employee heard employee's knee pop. Employee's knee/leg then gave out and employee fell to the ground

A block of stone was cut into slabs on our MEM Saw. We flipped the block to cut the back side lips off and then re-loaded it onto the beams to be cut again. EE was lining up the wire for the cut, the block broke and pinned EE's legs against the wall of the MEM. EE was taken directly to the hospital and diagnosed with a compound fracture in left leg.

Miner was splitting a rock and EE's left index finger was caught between the rock and a porn of the splitter. The finger was treated at the local walk in clinic without significant damage done to the miner.

Employee bent over the wire basket to pick up a piece of veneer and when he did, he had a pain go through his lower back.

Supervisor was pulling pin out of guide, that was used as an anchor. Pin was tight causing it to go air born when free. When pin came down it struck employee on the top of his head causing a slight laceration to the crown of the employee's scalp.

Operator was stacking stone veneer when he felt pain in his right leg, lower right back and upper left back.

Foreign object flew into right eye while operator was driving a John Deere loader.

closing metal cover on motor enclosure and caught left ring finger between cover and frame mashing the tip

Lost balance and fell. while falling, operator reached out with his right hand to break his fall and caught it between the belt and the guard on a conveyor.

manually moving stone slab on roller conveyor

Stepping off haul truck ladder onto ground causing pain in right leg.

While palletizing dimensional stone,operator strained right shoulder.

Lifting stones and stacking them on a pallet.

Pulled a piece of stone on roller conveyor into splitter and strained his back.

While splitting a piece of stone, the stone kicked up and pinched the operator's finger between the stone and the frame of the machine

moving a slab of stone on a work bench and caught tip of finger between table and stone

While operator was performing a splitting operation, a slab of stone fell and caught the operator's left arm causing an abrasion.

While shrink wrapping a pallet of stone the employee bent over and pulled a muscle in his lower back.

While moving a pallet of stone slabs ,operator extended forks on the Teledyne fork lift to set pallet on floor.In doing so the machine tilted forward and operator hit his head on the roll cage causing a laceration above left eye.

In the process of replacing a conveyor belt, the employee was pulling the new belt into place and strained his lower back.

EMPLOYEE TRIPPED,AND WHILE TRYING TO BREAK HIS FALL,GRABBED THE WALL WHERE A NAIL WAS EXPOSED AND CUT HIS HAND ON THE WALL