Search the record

Worker slipped and fell off of crusher.

Worker slipped on gravel and sprained left ankle.

WHILE REPLACING A BEARING WITH A HAMMER, A SHARP PIECE OF BEARING SEPERATED AND IMBEDDED ITSELF IN THE MINERS MIDDLE FINGER ON HIS LEFT HAND.

Miner twisted his right ankle and sprained it when dismounting the water truck

Employee was using a box cutter to fit a belt. Cutter slipped and cut employees finger.

Miner was kicking a frozen door lock to break it loose

While repairing the Vertical Shaft Impactor (VSI),the LAR ring slipped and pinched a workers finger tips fracturing two finger tip bones.

After inspecting the hopper, the miner lowered the hopper lid and received a cut while removing his hand

While changing a screen in a screen assembly, the screen slipped and lacerated the miners leg.

The miner was sweeping a "hard to get to" place and strained his back

While doing maintenance on trackhoe, EE leaned over the edge of the bucket to check on a pin. EE then fell against the edge of the bucket and received a contusion to his rib.

Miner was removing a bolt from a surge bin, when the wrench slipped and he cut his left hand on the bin

Worker was cleaning the ground around the screen assembly and a rock fell off the screen which cut him when it hit him in the head. Worker was wearing a hard hat at the time.

Worker was moving a metal plate which slipped and cut his middle finger on his left hand

MECHANIC CUT HIS SECOND FINGER ON HIS LEFT HAND ON AN OIL CAN.

EE WAS ATTEMPTING TO FREE A STUCK CONTROL LEVER USING A WRENCH. THE WRENCH SLIPPED AND EE HIT HIS HAND ON THE FRAME OF THE BOBCAT.

WORKER WAS TRAVELING WITH FRONT LOADER AND ENCOUNTERED A ROUGH SURFACE. THIS CREATED A BACK STRAIN FROM BOUNCING IN THE SEAT. WORKER WAS WEARING HIS SEAT BELT.

WATER TRUCK ROLLED OVER DUE TO TRAVELING OVER UNEVEN GROUND.

WORKER WAS DRILLING OVERHEAD TO SET A DOOR. A METAL SHAVING FROM THE DRILLING FELL ON HIS FACE & GOT UNDER HIS SAFETY GLASSES & INTO HIS RT. EYE.

MASHED HAND WITH SCREEN.

INJURED WORKER WAS DOING GENERAL MAINTENANCE ON A SCREEN ASSEMBLY. SLIPPED AND CUT HIS LEFT LEG.

MINER WAS WALKING AND STEPPED ON A LOOSE ROCK WHICH CAUSED HIM TO SPRAIN HIS RIGHT ANKLE.

WHILE MAKING ADJUSTMENTS ON A BOBCAT THE WORKER MASHED HIS RIGHT THUMB

PRY BAR SLIPPED WHEN MINER WAS TRYING TO UNJAM THE CONE AND SPRAINED HIS LEFT WRIST. ACCIDENT WAS REPORTED TO COMPANY SAFETY OFFICE ON 5-16-03

MINER WAS HELPING CHANGE OUT A SCREEN. WHILE STEPPING OFF THE SCREEN HE STEPPED ONTO A ROCK WHICH CAUSED HIM TO TWIST HIS ANKLE.

WORKER DROPPED A GLASS SAMPLE HEATING TUBE AND CUT HIS HAND.

DISMOUNTNG MINER HAUL TRUCK AND STEPPED ON SOFT BALL SIZE ROCK. THIS WRENCHED AND STRAINED HIS RIGHT KNEE.

MINER WAS WALKING AND STEPPED ON LOOSE GRAVEL. THE MINER SLIPPED AND FELL INTO THE SIDE OF THE CONVEYOR BRUISING HIS KNEE.

OPERATOR FELL AND TWISTED HIS KNEE WHILE DESCENDING LADDER TO EXIT THE HAUL TRUCK.

WORKER WAS APPARENTLY TRYING TO RE-ESTABLISH PRIME ON THE PUMP BY FILLING THE CLEAN-OUT CAVITY WITH WATER. IT APPEARS AS THOUGH WHEN HE LOOSENED THE FIRST BOLT ON THE CLEAN-OUT CAVITY COVER, HOT WATER SPEWED FROM THE CAVITY ONTO HIS FOREARMS, THIGHS AND LOWER FRONT TORSO.

WORKER WAS PULLING ON A WRENCH TO LOOSEN A BOLT WHEN THE WRENCH SLIPPED AND HIT HIM IN THE HEAD.

ELBOW STARTED HURTING. A SPECIFIC EVENT CANNOT BE LINKED TO THE CONDITION.

WORKER WAS EXPERIENCING SORENESS IN HIS RIGHT WRIST WHILE OPERATING A FRONT LOADER NO SPECIFIC INCIDENT COULD BE LINKED TO THE SORENESS.

EXITING HAUL TRUCK, SLIPPED AND FELL TO GROUND.

STEPPED IN A HOLE WHILE WALKING AND TWISTED KNEE

WHILE WALKING TO NEXT GREASE POINT ON THE CRUSHER THE EE STEPPED INTO A HOLE & STRAINED HIS KNEE. NOTE: WORKER WAS ORIGINALLY INJURED 2/24/02 7001 REPORT SENT 2/18/02

WHILE USING BOBCAT TO REMOVE BUILT UP MATERIAL FROM UNDER CRUSHER A SOFTBALL SIZE ROCK FELL FROM CRUSHER HITTING MINER ON RIGHT THIGH.

MINER WAS GOING TO PERSONEL WHILE AT SHIFTS' ENDAND FELL OFF PICK UP TRUCK.

SLIPPED ON CATWALK AND FELL AGAINST HANDRAIL.

MINER WAS OPENING THE WATER TRUCK DOOR TO EXIT THE VEHICLE WHEN THE HANDLE BROKE AND CUT THE MINERS LEFT FOREARM.

PULLING ON A PRY BAR WHEN IT SLIPPED AND HIT HIM ON THE HAND.

WHILE WELDING HE RECEIVED A BURN TO 2 FINGERS ON HIS LEFT HAND.

OPENING FEED DOOR ON WASHER PLANT AND STRAINED STOMACH MUSCLES.

WORKER WAS OPERATING BOBCAT & NOTICED DERMATITISON HIS FOREARM.

REMOVING A ROCK AND PRYBAR HIT HIS THUMB AND MASHED IT.

MINER GOT DUST IN HIS EYE DUE TO THE BLUSTERY WIND.

MECHANIC HAD REMOVED THE OLD CUTTING EDGE AND WAS INSTALLING A NEW ONE WHEN IT SLIPPED AND MASHED HIS THUMB BETWEEN THE NEW CUTTING EDGE AND THE PALLET IT WAS DELIVERED ON.

MINER WAS REMOVING A 6" ROCK FROM SELF-CLEANING TAIL PULLEY. THE ROCK WAS ELONGATED & WAS STUCK WITH ONE POINT ON THE PULLEY & THE OTHER CREATING TENSION ON THE BELT. AS THE MINER TOUCHED THE ROCK WITH A STEEL BAR, THE ROCK CAME LOOSE & THEBELT SNAPPED UP AGAINST THE PULLEY, PULLING UP ON THE END OF THE ROD INSIDE & LEVERED IT DOWN ONTHE OUTSIDE END CAUSING HIM TO HURT HIS ARM.

MINER'S FOOT WAS RUN OVER BY A SERVICE TRAILER.