Search the record

While striking a track pin with a 10lb sledge hammer, a fragment of the pin broke off becoming a projectile and lodging in left leg just above the work boot. Employee was taken to emergency room to have metal chip removed.

Changing roller on belt when finger was pinched between roller and beam that the guard bolts to. *This injury was originally deemed as a first aid injury and not reportable but has evolved into a reportable injury with medical treatment involved.

Employee was walking in a brush pile and slipped off of a log injuring EE's left knee.

EE was in Wash Plant Lab starting up the plant. EE blacked out and fell on the floor. Co-worker walked into Lab and tried to do chest compressions on EE. EE opened eyes. Co-worker called 911. EE is on several medications. EE was in the hospital for a couple days for observation. Cause was issue with medications.

Excavator was hoisting an electric motor in place to be bolted by injured employee. Excavator operator shirt sleeve accidentally bumped swing joy stick after EE released the hydraulic lockout lever causing motor to swing and hit employee against side of screen. Employee was conscious entire time. EMS was called and employee was conscious when taken by EMS to hospital.

Employee fell from a ladder and broke wrist while adding washers to bolts on a structural steel building that was under construction.

Climbing down off of M-8 left foot rolled inward on bottom step and then fell to floor.

Employee working with a hand grinder and piece a foreign body got into EE's eye.

The employee was changing a 440 volt starter. Turned power back on to check starter after replaced. Checked the on/off button and determined new starter worked. He did not shut power down again, elected to hook up motor leads and in the process came in contact with the relay which in affect pulled starter into position causing flash back injuring him.

Employee shoveling under conveyor belt and strained back/leg.

When exiting the loader he slipped on ladder and hit his knee.

Fell on an upright unopened tube of silicone.

Employee stepping down off step of tractor and misstepped

Employee sanding using a wire brush on a drill and wind blew metal into eye.

Employee's fingers were pinched when bearing slipped and his fingers were caught between bearing and housing.

At this time it appears the employee had a heart attack.

Employee fainted.

Employee walking down ramp and pulled muscle in right calf

Employee assisting in putting in dryer trunion wheel; chain holding come along came loose sending come along into the employees' nose.

Changing reducer on fabco belt using skidsteer with boom attachment; reducer fell and hit employee's hand.

Employee working on #3 elevator and wind blew something in his right eye.

Lost grip with left hand coming down ladder of trailer, caught himself with right hand as he was falling back.

Employee shoveling and loading wheelbarrow and hauling sand, strained back moving wheel barrow.

Employee walking on uneven ground and twisted ankle.

Employee fell when new deck board on stair stringer broke causing employee to fall catching wrist on nail.

Employee told foreman he was not feeling well. Foreman assigned replacement loader operator and brought employee to employee locker room/restroom area. Employee was drying his hands when he suddenly passed out. CPR was started and 911 called. Employee was not able to be saved.

Employee changing shive on motor and cut fingers on shive.

Employee using a grinder when it kicked back and hit his right thigh

Wrench slipped and cut finger/knuckle on left hand on the edge of 1/8" sheared stainless plate.

Pulling stand out from under trackmobile, strained stomach.

Employee using pipe wrench to free auger, wrench slipped causing employee to fall and strike head.

LIFTING DOOR ON MAINTENANCE BUILDING.

UTILITY KNIFE SLIPPED WHILE CUTTING BELTING.

EE GETTING INTO BACK OF TRUCK PICK UP AND FELT HIS KNEE POP.

PULLING ON DIVERTER AT WASH PLANT.

PULLING LONG HOSE OFF PUP TO UNLOAD AT CUSTOMER.

EMPLOYEE INHALED TOO MUCH CO2 WORKING ON DRYER ROOM NEAR BURNERS.

LIFTING WHEEL BARROW AND PULLE DMUSCLE IN BACK.

PULLING ON DREDGE ROPES AND CLIMBING SAND HILL STRAINING GROIN AREA.

HITTING BEARING AND A PIECE OF METAL BROKE OFF AND CUT NECK.

PULLING DREDGE ROPE OUT OF MUD, ROPE SLIPPED OVER BANK AND HIT HIM IN THE LEGS.

EE WAS OVERCOME BY CARBON MONOXIDE GAS, MAN BECAME LIGHT HEADED AND NAUSEATED, WAS TAKEN TO HOSPITAL AND GIVEN OXYGEN. WAS ABLE TO RETURN TO WORK THE SAME DAY BUT JOB FOREMAN WOULD NOT ALLOW H IM TO.

EE WAS TURNING SAND PUMP WITH A PIPE WRENCH. WHILE TURNING THE SHAFT GOT CAUGHT BETWEEN THE WRENCH AND THE PUMP BASE.