Search the record

FELL OF 5 1/2" CONE. HIT RIGHT ANKLE ON TRUCK BED.

HE WAS USING A PICK TO CLEAN PACKED DIRT OUT OF THE FEEDER. AS HE CAME DOWN WITH THE PICK HI HITTHE SIDE OF THE FEEDER AND DEFLECTED AND HIT HISLOWER RIGHT LEG.

PUNCTURED THUMB WHILE TIGHTENING HOSE CLAMP WITHA SCREWDRIVER.

SLIPPED AND FELL ON HIS BACK.

LIFTING GEAR REDUCER ONTO SHAFT ON HEAD PULLEY ON CONVEYOR. INJ WAS NOT REPORTED UNTIL 5/18/01

EE WAS STANDING ON A PLANK WELDING EYE BOLTS ON THE CONVEYOR OF THE CRUSHER THE PLANK BROKE AND EE FELL INTO THE CRUSHER STRAIGHT DOWN SOMETHING HIT HIM IN THE NEED WHEN HIS HARD HAT FELL OFF. REQUIRING S STITCHES. HE IS SORE-HIS REMOVED HIS STITCHES AND HE DID NOT MISS ANY WORK.

EE WAS DOING REPAIR WORK ON CAB OF 773B CAT TRUCK. EE STARTED TO GET OFF TRUCK, LOST BALANCE AND FELL ON CONCRETE.

EE WAS UNHOOKING ELECTRIC SERVICE FROM WELDING MACHINE AND WAS SHOCKED.

EE WAS TURNING TO THE LEFT AFTER PLACING A BAG OF TURKEY GRIT ON A PALLET KNEE & FOOT ON RIGHT LEG FAILED TO TURN WITH BODY INJURED RIGHT KNEE

EMPLOYEE WAS TIGHTENING A BOLT WHEN THE WRENCH SLIPPED OFF AND EMPLOYEE FELL BACK AND HIT HAND ON GUARDRAIL.

EE WAS UNLOADING SCREEN PANELS FROM A TRAILER. THE JACK BROKE AND THE TONGUE OF THE TRAILER FELL ON TOP OF THE EE'S RIGHT FOOT.

EMPLOYEE WAS ADJUSTING V-BELTS WHEN IT SLIPPED AND SMASHED HIS FINGER.

HOLDING SLEDGE HAMMER FOR ANOTHER EE TO TIGHTEN NUT ON OMNICONE CRUSHER EE'S SLEDGE DEFLECTED OFF OTHER SLEDGE & HIT INJ EE IN THE EYE. SAFETY GLASS BROKE CAUSING LACERATION TO LEFT EYE

BUMPED HIS HEAD WHEN HIS KNEE CAME OUT OF JOINT, IT HAPPENED WHEN HE WAS WALKING UP THE STEPS.

NO ONE WAS INJURED. THE ACCIDENT HAPPENED IN THE QUARRY. WHILE MOVING THE SHOVEL THE OPERATOR WAS NOTIFIED THAT THE ENGINE COMPARTMENT WAS ON FIRE, THE OPERATOR THEN SHUT THE SHOVEL DOWN, ACTI VATED THE FIRE SUPPRESION SYSTEM, AND EXITED THEMACHINE, THE FIRE WAS UNCONTROLABLE AND ENGULFED THE SHOVEL ENGINE COMPARTMENT. TOTAL LOSS.

THE EE WAS KNEELING AND TRIED TO STAND HIS RIGHT KNEE LOCKED UP.

ON 6/9/00, HE BENT DOWN TO PICK UP SOMETHING & COMPLAINED OF A PULLED MUSCLE. HE CONTINUED TO WORK. THIS WASN'T CONSIDERED A REPORTABLE ACCIDENT TO US UNTIL HE MISSED WORK ON 6/19/00; HIS DO CTOR'S OFFICE CALLED US TO VERIFY THAT WORKER'S COMP WOULD PAY FOR HIS VISIT. THIS WAS 1ST INDICATION THAT HE HAD A REPORTABLE INJURY. HE WAS ABSENT FROM WORK 6/19/00-6/24/00; RETURNED 6/26.

SLIPPED AND FELL ON MATERIAL FROM DISCHARGE CHUTE WHILE BOLTING ON A NEW FLAP. FRACTURED LEFT RING FINGER.

CUTTING BELTING MATERIAL W/RAZOR KNIFE--KNIFE SLIPPED, CUTTING EMPLOYEE ON RIGHT THIGH.

TIGHTENING COME-A-LONG TO SPLICE BELT COME-A-LONG SLIPPED. HE FELL OFF 2 TON TRACK AND LANDED ON HIS BACK AND NECK.

UNLOADING TIN HORN.

EE WAS IN THE PROCESS ON CHANGING OUT BIT IN DRILL & THE BIT FELL OUT OF CHUCK LANDING ON HIS LITTLE FINGER OF LEFT HAND SMASHING THE TIP JUST UNDER THE FINGERNAIL CUTTING A PIECE OUT.

EE WAS WALKING FROM PRIMARY CRUSHER TO GREASE HOUSE. THE WEATHER WAS RAIN AND SLEETING. EE SLIPPED OR TRIPPED AND FELL.

STACKING POWDER BOXES IN TRUCK, GRABBED A BOX, TWISTED TO PUT IT DOWN, WRENCHED BACK.

EE BEGAN MOVING CARS WITH HIS HEAD OUT THE WINDOW WATCHING THE TRACKS. HE HIT LOADED CARS AT A SPEED OF 3-5 MPH. THIS KNOCKED HIS SHOULDER INTO THE WINDOW FRAME.

EE WAS REPLACING RETURN ROLLER ON CONVEYOR. ROLLER FELL AND LANDED ON EE'S FINGER.