Buscar en el registro

WHILE TIGHTENING CHAIR LINER BOLTS ON THE NORTH SAG MILL, EMPLOYEE PICHED HIS LEFT RING FINGER BETWEEN THE WRENCH AND THE BEARING CAP. EMPLOYEE'S INJURY REQUIRED STITCHES.

WHILE WORKING ON A RADIUS BAR ON A SHOVEL DIPPEREMPLOYEE SUSTAINED A FRACTURE TO HIS RIGHT HAND WHEN THE COME-A-LONG HE WAS USING STRUCK HIS HAND.

WHILE IN THE PROCESS OF MIXING EPOXY, EMPLOYEE FELT PAIN IN HIS LEFT SHOULDER. HE RECEIVED PHYSICAL THERAPY.

WHILE REMOVING SPIRAL BAR FROM A SHORT-HEAD SYNTRON FEEDER, EE WAS STRUCK IN THE FACE WITH A COME-A-LONG. HE RECEIVED SUTURES.

EE MASHED FINGER ON LEFT HAND WHILE SCALING WITH BAR. THE ACCIDENT WAS A FIRST AID INCIDENT - NO DAYS LOST OR REPORTABLE. LATER, SURGERY WAS PERFORMED ON THE FINGER. THE EE BEGAN LOSING TIME O N 1-17-00. THIS TREATMENT WAS DISCOVERED ON A AUDIT

CUT RIGHT RING FINGER. MASHED ON WRENCH. HAIRLINE FX. CONDITION DISCOVERED ON RECORDS AUDIT.

EE WAS WIRE BRUSHING A WELD WHEN HE FELT SOMETHING ENTER HIS EYE

EE REPORTED SHE WAS ATTEMPTING TO OPEN A VALVE WITH A VALVE WRENCH. THE VALVE WAS STUCK & THEN BROKE FREE CAUSING A JERKING MOTION IN HER SHOULDER

WHILE USING A RAM TO SLUG DOWN THE NUT ON A STANDARD MANTLE, EMPLOYEE STRAINED HIS LOWER BACK, AND RECEIVED PHYSICAL THERAPY.

WHILE HAND MUCKING A PLUGGED CRUSHER A ROCK BUCKET SLIDE INTO THE EE PINCHING HIS ARM BETWEEN ROCK BUCKET & LINER.

WHILE BALL CHARGING A BALL MILL, EMPLOYEE WAS ATTEMPTING TO UNPLUG A CHUTE AND IN DOING SO, PINCHED HER LITTLE FINGER ON HER LEFT HAND BETWEEN THE BALL CART AND PRYBAR. INJURY REQUIRED THREE S TITCHES

WHILE REMOVING THE RIGHT REAR STRUT FROM A TRUCK EE CAUGHT HIS FINGER BETWEEN THE CAT BAR AND TRUCK FRAME. EE RECEIVED STITCHES.

WHILE ATTEMPTING TO UNPLUG #131 FEEDER WITH A SCALING BAR. EE PINCHED HIS LEFT INDEX FINGER BETWEEN THE EDGE OF THE DOOR AND THE SCALING BAR.

WHILE INSTALLING A FLOOR JACK UNDER A WATER TRUCK EE PINCHED HIS RIGHT THUMB BETWEEN THE JACK AND FRAME OF THE TRUCK.

WHILE CLEARING A BLOCKAGE OF MATERIAL FROM A PROBE ON THE DISCHARGE SIDE OF THE STANDARD CRUSHEREMPLOYEE WAS STRUCK ON THE RIGHT CHEEK BY THE PRYBAR HE WAS USING. THIS CAUSED A LACERATION TO T HE CHEEK ABOUT 3 TO 4 INCHES LONG,REQUIRING SOMESTITCHES.

THE EE WAS HELPING A MECHANIC INSTALL A DRIVE COUPLING AND HIT HIS FINGER WITH A 4 POUND HAMMER.

WHILE DRIVING A SWING CYLINDER PIN WITH A HAMMER, EMPLOYEE WAS STRUCK IN THE RIGHT HAND, BY A SHARD OF METAL THAT DETACHED FROM THE PIN.

THE EE WAS CUTTING A PIECE OF 5" WIRE ROPE TO REPLACE A BROKEN TRIP CABLE ON A SHOVEL WHEN A STRAND SPLINTERED AND BECAME IMBEDDED IN HIS FINGER.

HOISTMAN STRAINED ARM WHILE BARRING HANGUP EE DID NOT REPORT ACCIDENT INITALLY REPORTABLE DUE TO THERAPY NO LOST TIME OR RESTRICTED WORKDAYS

HIT ELBOW WITH GROUND BAR. REPORTABLE DUE TO THERAPY RECD AT A LATER DATE NO LOST DAYS OR RESTRICTED WORKDAYS

THE EE WAS REMOVING THE NUT FROM A LINER BOLT ON A SAG MILL, DURING A LINER A REPLACEMENT REPAIR. THE EE INSIDE THE SAG MILL PRYED THE LINER LOOSE AND THE EE PINCHED HIS FINGER TIP BETWEEN THE NUT AND THE SHELL OF THE MILL.

EE WAS SCALING WITH BAR. BAR SLIPPED OFF ROCK HE WAS PULLING. BEGAN RESTRICTED DUTY 11/17/98.

EE STATES THAT BACK WAS INJURIED WHILE BARRING AT BIN. MEDICAL EVALUATION RESULTS ARE PENDING-LAST DAY WORKED-10-5-98.

EE STRAINED BACK WHILE SCALING. REPORTABLE DUE TO THERAPY.

THE EMPLOYEE WAS USING A HAMMER AND PUNCH TO DRIVE A PIN OUT OF A SUSPENSION AND HIT THUMB.

EMPLOYEE WAS CUTTING EXPANSION BOARD WITH A UTILITY KNIFE WHEN IT SLIPPED AND CUT HIS LEFT HAND.

STRIPPING WIRE INSULATION - CUT LEFT HAND - STITCHES REQUIRED.

THE EE REPORTED WHILE PRYING UP ON A CENTRALIZER PIN AS ANOTHER, EE WAS DRIVING A ROLL PIN INTO THE CENTRALIZER PIN, A SLIVER OF THE ROLL PIN STRUCK HIS LEFT FOREARM. A METAL SLIVER EMBEDDED I N HIS LEFT FOREARM REQUIRING SURGERY AND THREE STICHES TO REMOVE IT RESULTED.

EMPLOYEE STATES HE WAS TRIMMING RUBBER OFF SCREEN PANELS AND CUT HIMSELF WITH UTILITY KNIFE.

EE WAS USING A 24" RIG'D PIPE WRENCH TO TIGHTEN A COUPLING ON DRILL STEEL OF THE DIAMEC262 CORE DRILL. WHILE PUSHING DOWN ON THE WRENCH HIS BODYWEIGHT SHIFTED AND HIS RIGHT KNEE HYPEREXTENDED OUT CAUSING HIS KNEE TO GIVE OUT.

THE EE WAS HITTING THE CUTTING EDGE WITH A HAMMER WHEN A PIECE OF METAL FLEW OFF CUTTING EDGE & IMBEDED IN THE EE'S THIGH.

THE EMPLOYEE WAS TIGHTENING A VALVE ON A STACKER ASSY. WHEN THE SOCKET SLIPPED OFF THE FITTING AND THE EMPLOYEE FELL BACKWARD AND AS SHE FELL PLACED HER LEFT HAND OUT TO BRAKE HER FALL AND FRACTURED HER LEFT WRIST.

EE WAS APPLYING BOLT PRESSURE TO A MECHANICAL PULLER WHEN IT SLIPPED OFF ITS MOUNTING POSITION. FINGER ON HAND HOLDING THE PULLER WAS PINCHED BETWEEN THE PULLER & ONE OF THE BOLTS.

WHILE CUTTING A PIECE OF LOOSE RUBBER, EMPLOYEE SUSTAINED A LACERATION TO HIS LEFT LITTLE FINGER. RECEIVED SUTURES.

WHILE PRYING A LINER IN PLACE, EE PINCHED HIS FINGER BETWEEN THE BAR AND LINER. EE RECEIVED SUTURES.

THE EE HAD JUST OPENED A CARDBOARD BOX WITH KNIFE THAT WAS ATTACHED TO HIS BLET WITH A LEATHER STRAP. AS HE WENT TO THROW THE BOX LID AWAY, THE KNIFE WAS STILL IN HIS HAND AND WAS PULLED BACK AND CUT HIS LEFT THUMB

THE EMPLOYEE WAS HOLDING A RIPPER PIN SHANK TOOLTO REMOVE THE PIN FROM A DOZER RIPPER POINT. AS THE EMPLOYEE HELD THE TOOL ANOTHER EMPLOYEE HIT IT WITH A SLEDGE HAMMER AND A PIECE OF METAL BRO KE OFF THE TOOL AND LACERATED HIS HAND.

THE EE WAS USING A PRY BAR TO REMOVE BRAKE CALIPERS FROM A TRUCK, WHEN THE PRY BAR SLIPPED AND HIT THE EE IN THE FACE.

WHILE CLOSING VALVE, THE EMPLOYEE PINCHED FINGER BETWEEEN WRENCH AND ADJOINING PIPE.

EMPLOYEE HIT HAND ON METAL OF LOADING POCKET- CUT TOP OF LEFT HAND.

WHILE USING A PRY BAR TO MANEUVER MILL LINERS, EE STATES HE HURT HIS BACK. EE'S INDUSTRIAL CASE WAS FINALLY ACCEPTED BY THEINDUSTRIAL COMMISION/STATE FUND ON 12/12/97. TIM E LOST STARTED 12/12/97

THE EMPLOYEE WAS USING A PADDLE TO REMOVE A STARTER SHEET FROM A STARTER BLANK WHEN PADDLE SLIPPED AND HE HIT HIMSELF IN THE FACE BREAKING A TOOTH.

WHILE CUTTING PROFILE LINERS TO SIZE, THE KNIFE INJURED WAS USING CUT HIS RIGHT LEG. INJURED RECIEVED SUTURES.

EE STATES WHILE PUTTING BREAKOUT WRENCH ON CASING SAME SLIPPED, SMASHING HIS WRIST AGAINST THEDERRICK. SUSTAINED FRACTURE TO RIGHT WRIST.

EE WAS CHOPPING A 6"X8" TIMBER WHEN HE OVERSWUNGTHE AXE, THE AXE WENT THROUGH THE TIMBER, STRIKING THE EE'S RIGHT LEG. LACERATION TO THE RIGHT LEG, NEEDED 5 STITCHES.

EE REPORTED HE WAS HITTING CHISEL WITH A HAMMER,. EE MISSED AND HIT HIS LEFT THUMB.

WHILE REMOVING NUTS FROM A CRUSHER SPIDER RING AT THE PRIMARY CRUSHER, HE STRAINED HIS RIGHT SHOULDER.

EE WAS INJURED 8/1/97, BUT DID NOT RESULT IN MEDICAL TREATMENT UNTIL 10/28/97 [ARTHOGRAM]. EE WAS HELPING IN THE INSTALLATION OF A PARK BRAKE ASSEMBLY ON A 988 CAT LOADER. WHILE ATTEMPTING TO POSITION THE ASSEMBLY [REACHING UP] & USING A PRY BAR, NOTICED SORENESS IN HIS SHOULDER AFTER COMPLETION OF INSTALLATION.

FINGERS MASHED BY SCALING BAR EE WAS BARRING ROCK STITCHES REQUIRED BEGAN LOSING TIME 7-17-97.

EE WAS CLEANING GRIZZLY ON THE 1500 LEVEL, WHEN A ROCK PINCHED HIS HANBD AGAINST THE PICK HANDLE.