Buscar en el registro

Employee was using a 3/4 ton chain ratchet to replace return roller in tunnel. EE wrapped chain ratchet hook around piece of 8" channel, after raising the belt EE bent over to put roller in, the chain came loose causing hook to hit EE in nose and mouth

Employee was taking a two wheeled dolly that carries small rolls of electrical wire up the steps to the loadout when EE slipped, when EE landed EE's ring finger caught between grating floor and the dolly handle causing a fracture and laceration requiring sutures.

Employee was cutting angle with a torch. It fell & came back up and hit EE's left arm, cutting EE's arm.

Employee walking up steps and sprained right knee.

Employee was pulling a rope across the spillway between pond #1 and pond #2 when ee slipped twisting left knee.

Employee noticed something wrong with eye on way home from work. When ee woke up it was irritated and ee notice something stuck to eye. Employee received medical treatment for this injury at an optometrist office on 10/05/18.

Employee was removing a pipe elbow with a chain fall when it became fouled and shifted suddenly, catching hand in a pinch point between the elbow and an adjacent pipe.

12/1/17 EE & another EE was removing a piece of metal from chute when EE started experiencing pain in lower back. EE completed shift and filed an incident report that lower back was hurting, EE worked the following shift. EE sought medical attention on 12/2/17 and given full release. 12/7/17 went to different hospital and taken off work. Pain management for back since 8/2/12.

While attempting to remove solid concrete blocks from the raw coal crusher chute employee reached in to remove a block and another block fell striking employee on the hand, cutting right ring finger.

On 04/22/2016 this Plant was notified that this employee was diagnosed with pneumoconiosis.

Employee was working on a loft step ladder. EE went up the ladder to grind a bevel. EE got to the third step and the extension cord that EE had for the grinder was short. As EE turned to pull on the extension cord to get more slack, feet slipped on ladder rung causing EE to hit side on top of ladder.

Employee was a passenger in a L7000 Ford Utility truck when the operator of the truck lost control of the vehicle and struck a utility pole and traveled over an embankment.

Employee, along with three other workers, was taking rollers off of a belt line. One of the rollers slipped and fell back into the rollers channel frame. Employee's thumb was in the channel when the roller fell. Employee received 4 sutures due to the laceration on right thumb.

EE was walking from load out back when a gust of wind blew rust into his eye. We feel this should be classified some other way than being a reportable accident this wasn't because of the mine environment employee was wearing his glasses also. This wind had been blowing like this for several days. He didn't cease work on 2-23-12. He didn't seek medical attention until 2-27-12.

Employee was relocating a 1.5 ton chain. When he went to pick the chain up, he felt a pain in left side and groin. Employee continued to work. Went to doctor on 3/13/12 and diagnosed with hernia. Surgery will be scheduled in near future. Employee is continuing to work full duties until the surgery.

EE was closing door on end loader, when door closed his hand was in door frame and door closed on middle finger cutting it. Resulting in laceration requiring stitches.

Member was replacing the cutting edge on a blade for a bulldozer using a 1/2" impact gun. As he was doing this he stumbled striking his back on the tracks of the dozer. Member brought in documentation from his doctor on 5/27/2010

injured was doing a line bore on a dozer and got index finger caught on drill bit causing a laceration his left index finger requiring stitches.

EE was working on the clean coal feed belt building floor. Crew took lunch in load out building to get out of the heat, injured realized he left hard hat and was going to get it. He walked into a piece of angle iron that was sticking out from the steps that was holding the hand rail to the steps (approx 5'6" off the ground) caused a laceration to his head. Not normal walkway.

While installing a 1/2 nut & bolt in a rail over insured's head the nut slipped out of his hand & hit him in the front of tooth. Injured stated he chipped his tooth.

Employee was using a 1" impact wrench with a swivel. The pin came out of the swivel and caught his left thumb causing a laceration. He received 4 stiches and a Tetnus shot.

Employee was doing some housekeeping and while throwing some bags into trash container some of the chemical powder blew into his eyes. The left eye was irritated the worst. Received antibiotic ointment.

Member was helping take a pump apart. Moving the impeller to the side of the pump, it fell over landing on his left foot.

EE was taking engine compartment door off of dozer to gain access to starter. EE squated down to lift door and his right knee started hurting. First day away from work 5/4/06.

EMPLOYEE WAS WALKING OUT ON THE THICKNER AND AS HE WALKED HIS FOOT SLIPPED THROUGH A HOLE WHICH WAS CAUSED BY A DEFECTIVE WELD. HIS LEFT KNEE HIT THE GRATING CAUSING A LACERATION REQUIRING STITCHES.

WALKING BEHIND BELT LINE, TRACING A CUTTING TORCH LINE. WATER WAS APPROXIMATELY ANKLE DEEP SO A SUMP HOLE COULD NOT BE SEEN. THE GRATING HAD BEEN REMOVED AND NOT PUT BACK. EMPLOYEE FELL AND CUT RIGHT HAND.

EE WAS DISMOUNTING A KATMASU ENDLOADER TO CLEAN COAL FROM A COAL PAD WHEN HE SLIPPED AND FELL FROM THE LOADER LOADING ON HIS BACK.

EMPLOYEE STATED HE WAS WALKING ON SHAKER AND EMPOYEE STUMBLED OVER ON HIM AND TWISTED HIS KNEE. CONTESTING COMPENSATION.

EE WAS CHANGING OUT BAD FLOOD LIGHT BULB, BULB BROKE, CUTTING INDEX FINGER.

INJURED WAS OPERATING A TRACTOR-TRAILER AND WAS DUMPING A LOAD OF COAL. ACCORDING TO THE INJURED DRIVER, THE TRAILER WAS 3-4 STAGES UP WHEN SUDDENLY THE LOAD SHIFTED OR SOMETHING BROKE ON THE TRAILER, CAUSING THE TRAILER TO FALL OVER TOWARD THE DRIVER'S SIDE, STRIKING THE GROUND.

EE WAS LIFTING A 42" IMPACT IDLER UPON THE FORKS OF A BOBCAT FORKLIFT, APPROX 1 FOOT FROM THE WORKING PLATFORM AND EXPERIENCED PAIN IN HIS BACK.

REMOVING BELT STRUCTURE W/BOOM TRK EE WAS ON GROUND THE SUSPENDED STRUCTURE CAME APART & A PIECESTRUCK EE ON THE HEAD HE WAS WEARING HARD HAT

WALKING DOWN STEPS THAT WERE WET

EMPLOYEE WAS MOVING A PIECE OF 6' PIPE. HE EXPERIENCED PAIN THAT NIGHT THAT GOT WORSE. THE DOCTOR STATED THAT HE HAD TWO CRACKED RIBS ON HIS RIGHT SIDE ALONG WITH SWELLING.