Mining Incidents
Search Operators Mines Alerts Research Controllers Fatalgrams About
English Español
← Back to search

Eufaula No 50: 73 MSHA citations Metal/Non-Metal

Youngman Rock Inc · Surface
Controlled by George Paul Glover
Eufaula, Mcintosh County, OK  ·  Abandoned
MSHA Mine ID: 3400569

Eufaula No 50 has $8K in proposed MSHA penalties and $0 outstanding across 1 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Eufaula No 50.

Fatalities
0
Total incidents
10
Years on record
1987–2015
Latest incident
Feb 2015
Compliance record
MSHA citations since 2000
73
citations
16
significant & substantial
$8,395
proposed penalties
$8,395
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
See Youngman Rock Inc's full MSHA compliance history →
Inspection activity
MSHA inspections since 2000
63
inspections on record
702
inspection hours
n/a
citations per 100 inspection hours
ⓘ This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 702 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

Eufaula No 50 has $8K in proposed MSHA penalties and $0 outstanding across 1 contested dockets.

Penalty disposition
ⓘ Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$8K
proposed penalties
$8K
current assessed
$8K
paid to date
$0
outstanding
73 assessments are final orders; 1 contested dockets.
Of $300 in penalties contested before the Commission, $300 was upheld in final decisions.
As of the most recent assessment on 2022-07-19.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
ⓘ Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
21.9%
significant & substantial
5.5%
high negligence or reckless
21.9%
reasonably likely or greater
50.7%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 9.6% low, 84.9% moderate, 5.5% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
When citations were contested
ⓘ Contesting a citation before the Federal Mine Safety and Health Review Commission is a lawful right. These figures state the public outcomes of that process, from MSHA's Contested Violations file.
3 citations taken to the federal commission · 4% of citations on record
  • Stood as issued 3 · 100%
0%
Penalty reduction in decided contests
$300 proposed, $300 after decisions · industry: 39%
Source: MSHA Contested Violations file (public record), updated weekly. A dismissed or defaulted contest leaves the citation standing as issued; a vacated or withdrawn citation is removed from the violation record. Latest contest filed 2009-07-21.
Contested penalties
ⓘ A reduction or dismissal at the Commission is a lawful outcome of contesting a proposed penalty. Figures are the proposed amount and the amount upheld in the docket's decision.
Largest penalties this mine contested before the Federal Mine Safety and Health Review Commission, with the outcome on record.
Docket Decision Judge Year Proposed / upheld
CENT 2009-347M Dismissal Lesnick 2010 $300 → $300
Source: FMSHRC civil penalty dockets and decisions (public record), updated weekly.
Health sampling
ⓘ A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
ⓘ Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2019-06-12, 7 years ago
20%
of limit-tested samples over the exposure limit
37
samples
20
limit-tested
Most sampled contaminants
  • Quartz, respirable, >1% Qtz204 over
  • Respirable dust, <.1mg17
Show the individual readings (37)
Date Contaminant Concentration Limit Conc / limit Occupation
2009-10-07 Quartz, respirable, >1% Qtz 0.25 0.19 1.32 Crusher Oper/Worker
2009-04-22 Quartz, respirable, >1% Qtz 0.48 0.31 1.55 Backhoe Operator
2006-08-31 Quartz, respirable, >1% Qtz 0.56 0.49 1.14 Laborer, Bullgang
2002-11-21 Quartz, respirable, >1% Qtz 0.31 0.31 1.00 Crusher Oper/Worker
2019-06-12 Respirable dust, <.1mg 0 Front-end Loader Operator
2019-06-12 Respirable dust, <.1mg 0 Truck Driver
2019-06-12 Respirable dust, <.1mg 0 Crusher Oper/Worker
2019-06-12 Respirable dust, <.1mg 0 Rotary Bucket Ex. Operator
2019-06-11 Respirable dust, <.1mg 0 Sampler, Dust
2019-06-11 Respirable dust, <.1mg 0 Sampler, Dust
2014-09-17 Respirable dust, <.1mg 0 Crusher Oper/Worker
2014-09-17 Quartz, respirable, >1% Qtz 0.24 2.19 0.11 Utility Man
2014-09-17 Respirable dust, <.1mg 0 Truck Driver
2012-12-04 Respirable dust, <.1mg 0 Crusher Oper/Worker
2012-12-04 Quartz, respirable, >1% Qtz 0.16 1.26 0.13 Truck Driver
2012-12-04 Respirable dust, <.1mg 0 Front-end Loader Operator
2011-05-17 Quartz, respirable, >1% Qtz 0.36 0.75 0.48 Crusher Oper/Worker
2011-05-17 Respirable dust, <.1mg 0 Truck Driver
2011-05-17 Quartz, respirable, >1% Qtz 0.17 1.13 0.15 Front-end Loader Operator
2009-11-24 Respirable dust, <.1mg 0 Crusher Oper/Worker
2009-10-07 Quartz, respirable, >1% Qtz 0.22 0.25 0.88 Utility Man
2009-06-30 Quartz, respirable, >1% Qtz 0.13 0.35 0.37 Backhoe Operator
2009-04-22 Quartz, respirable, >1% Qtz 0.35 0.38 0.92 Laborer, Bullgang
2009-04-22 Quartz, respirable, >1% Qtz 0.18 0.2 0.90 Crusher Oper/Worker
2006-08-31 Quartz, respirable, >1% Qtz 0.19 0.39 0.49 Truck Driver
2006-08-31 Respirable dust, <.1mg 0 Front-end Loader Operator
2006-08-31 Respirable dust, <.1mg 0 Truck Driver
2005-03-16 Quartz, respirable, >1% Qtz 0.14 0.45 0.31 Truck Driver
2005-03-16 Quartz, respirable, >1% Qtz 0.51 0.6 0.85 Crusher Oper/Worker
2005-03-16 Respirable dust, <.1mg 0 Truck Driver
2005-03-16 Respirable dust, <.1mg 0 Front-end Loader Operator
2004-05-13 Respirable dust, <.1mg 0 Crusher Oper/Worker
2004-05-13 Quartz, respirable, >1% Qtz 0.27 0.31 0.87 Laborer, Bullgang
2002-11-21 Quartz, respirable, >1% Qtz 0.13 0.49 0.27 Utility Man
2002-11-21 Quartz, respirable, >1% Qtz 0.2 0.9 0.22 Front-end Loader Operator
2002-11-21 Quartz, respirable, >1% Qtz 0.19 0.4 0.48 Truck Driver
2002-11-21 Quartz, respirable, >1% Qtz 0.25 0.73 0.34 Truck Driver
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.

Eufaula No 50 recorded 9.92 reportable injury cases per 100 full-time workers in 2015.

Injury rate, 2015
ⓘ This rate is reportable injury cases per 100 full-time-equivalent workers per year, computed as 200,000 times cases divided by MSHA operator-reported employee-hours. Cases are injuries MSHA graded degree 01 through 07; accident-only events that hurt no one are excluded, and so are contractor injuries, whose hours do not attach to a single mine. Rates begin in 2000, when quarterly employment reporting starts, and are withheld below 20,000 hours in a year.
9.92
total case rate
9.92
days-away rate
0.000
fatality rate
Above average. The US metal and nonmetal mining average was 2.26 and the all-US-mining average was 2.72 cases per 100 workers.
In Oklahoma, metal and nonmetal mining averaged 2.39 cases per 100 workers that year.
Under 100,000 employee-hours were reported that year, so a single case moves the rate by two or more. Read the figure as approximate.
Year total case rate days-away fatal
2015 * 9.92 9.92 0.000
2011 * 0.00 0.00 0.000
2010 * 8.78 8.78 0.000
2009 * 8.96 0.00 0.000
2008 * 0.00 0.00 0.000
2007 * 0.00 0.00 0.000
2006 * 0.00 0.00 0.000
2005 * 0.00 0.00 0.000
* Fewer than 100,000 employee-hours that year; the rate is less stable.
Source: injury cases from MSHA accident and injury records; employee-hours from MSHA quarterly employment reports. Rate is cases per 100 full-time-equivalent workers, operator employees only.
Ownership history
  1. H D Youngman Contractor Inc 1950 to 1992
  2. Youngman Rock Inc 1992 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2023 5
2022 6
2021 6
2020 7
2019 7
2018 9
2017 9
2016 9
2015 10
2014 9
2013 10
2012 10
2011 12
2010 10
2009 9
2008 11
2007 10
2006 10
2005 11
2004 11
2003 11
2002 12
2001 12
2000 10
Source: MSHA quarterly employment and production, updated weekly.

Eufaula No 50 sits in McIntosh County, Oklahoma, where the Census mining category is 1.1% of county employment.

Local economic context
ⓘ County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
McIntosh County, Oklahoma · Population 19,237
1.1%
Mining share of county employment
$46,203
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
ⓘ Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2023 Q2 1,801 0 0 0.0
2023 Q1 2,364 0 0 0.0
2022 Q4 2,615 0 0 0.0
2022 Q3 2,734 2 0 731.5
2022 Q2 2,671 0 0 0.0
2022 Q1 2,868 2 0 697.4
2021 Q4 2,992 0 0 0.0
2021 Q3 3,585 1 0 278.9
Show 86 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2021 Q2 2,820 0 0 0.0
2021 Q1 2,477 0 0 0.0
2020 Q4 3,489 0 0 0.0
2020 Q3 3,451 0 0 0.0
2020 Q2 3,414 0 0 0.0
2020 Q1 3,131 0 0 0.0
2019 Q4 3,096 0 0 0.0
2019 Q3 3,607 0 0 0.0
2019 Q2 2,841 6 0 2111.9
2019 Q1 2,446 0 0 0.0
2018 Q4 3,762 3 1 797.4
2018 Q3 3,848 0 0 0.0
2018 Q2 4,176 0 0 0.0
2018 Q1 4,101 1 0 243.8
2017 Q4 3,952 0 0 0.0
2017 Q3 4,582 0 0 0.0
2017 Q2 3,901 2 2 512.7
2017 Q1 3,940 0 0 0.0
2016 Q4 4,471 0 0 0.0
2016 Q3 4,638 1 0 215.6
2016 Q2 4,814 0 0 0.0
2016 Q1 4,431 3 2 677.0
2015 Q4 5,130 0 0 0.0
2015 Q3 5,088 0 0 0.0
2015 Q2 5,225 1 0 191.4
2015 Q1 4,728 3 1 634.5
2014 Q4 4,765 0 0 0.0
2014 Q3 4,348 0 0 0.0
2014 Q2 4,959 0 0 0.0
2014 Q1 4,431 0 0 0.0
2013 Q4 4,523 0 0 0.0
2013 Q3 4,562 0 0 0.0
2013 Q2 4,357 1 0 229.5
2013 Q1 4,627 0 0 0.0
2012 Q4 5,046 2 0 396.4
2012 Q3 4,632 0 0 0.0
2012 Q2 5,112 2 0 391.2
2012 Q1 4,870 2 0 410.7
2011 Q4 5,299 0 0 0.0
2011 Q3 5,741 0 0 0.0
2011 Q2 6,275 4 0 637.5
2011 Q1 6,065 1 1 164.9
2010 Q4 5,695 0 0 0.0
2010 Q3 5,874 0 0 0.0
2010 Q2 5,682 0 0 0.0
2010 Q1 5,527 0 0 0.0
2009 Q4 5,931 1 1 168.6
2009 Q3 5,560 0 0 0.0
2009 Q2 5,840 5 1 856.2
2009 Q1 4,988 0 0 0.0
2008 Q4 5,761 3 0 520.7
2008 Q3 6,749 0 0 0.0
2008 Q2 6,243 0 0 0.0
2008 Q1 5,511 0 0 0.0
2007 Q4 5,163 0 0 0.0
2007 Q3 5,514 2 0 362.7
2007 Q2 5,881 0 0 0.0
2007 Q1 4,649 1 0 215.1
2006 Q4 4,996 0 0 0.0
2006 Q3 5,111 0 0 0.0
2006 Q2 5,569 0 0 0.0
2006 Q1 5,512 0 0 0.0
2005 Q4 5,452 1 0 183.4
2005 Q3 6,487 0 0 0.0
2005 Q2 6,906 1 1 144.8
2005 Q1 6,369 3 1 471.0
2004 Q4 6,853 0 0 0.0
2004 Q3 6,862 0 0 0.0
2004 Q2 7,141 1 0 140.0
2004 Q1 6,512 0 0 0.0
2003 Q4 5,850 2 0 341.9
2003 Q3 5,766 2 1 346.9
2003 Q2 5,993 0 0 0.0
2003 Q1 4,737 0 0 0.0
2002 Q4 5,238 3 1 572.7
2002 Q3 5,130 0 0 0.0
2002 Q2 5,499 0 0 0.0
2002 Q1 5,658 3 2 530.2
2001 Q4 6,277 0 0 0.0
2001 Q3 7,115 0 0 0.0
2001 Q2 4,867 0 0 0.0
2001 Q1 5,639 1 0 177.3
2000 Q4 5,074 0 0 0.0
2000 Q3 5,913 4 1 676.5
2000 Q2 5,632 0 0 0.0
2000 Q1 6,341 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

10 on file

2015 · 1 incident

February 17, 2015 OK · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman SLIP OR FALL OF PERSON
Youngman Rock Inc · Fall to the walkway or working surface

Employee slipped on a patch of ice next to the electric van in the plant area. He fell on his back and couldn't get up. He was helped up and taken to the doctor where he was x-rayed, given a shot and three prescriptions. He was told he could return to work on 2/23/15.

2010 · 1 incident

May 21, 2010 OK · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDLING OF MATERIALS
Youngman Rock Inc · Over-exertion in lifting objects

Changing blow bars in Universal 130/150 Impactor, EE was attempting to load a bar into tractor bucket to transport. Lifted more than he should. He thought he had just pulled a muscle below his waistline on his right side. He chose not to go to the doc. Had an annual checkup on 6/7/10 and it was then that it was discovered he had created a hernia by the lifting.

2009 · 1 incident

February 16, 2009 OK · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator HANDLING OF MATERIALS
Youngman Rock Inc · Caught in, under or between a moving and a stationary object

While attempting to move a toggle plate down a belt by hand injury pinched his left ring finger between th eplate and a roller which cut it open and took 10 stiches to fix.

2004 · 2 incidents

September 15, 2004 OK · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDTOOLS (NONPOWERED)
Youngman Rock Inc · Caught in, under or between a moving and a stationary object

WHILE USING A HOOK MADE FROM 5/8 ROUND ROD TRYING TO DISLODGE A ROCK HUNG IN THE CHUTE ABOVE THE JAW CRUSHER. THE ROCK CAME LOOSE AND JERKED THE HOOK AND THE EMPLOYEE'S HAND INTO THE TOP EDGE OF THE METAL PLATE ON THE SIDE OF THE CAT WALK SMASHING AND CUTTING HIS FORE FINGER ON HIS LEFT HAND.

March 11, 2004 OK · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDLING OF MATERIALS
Youngman Rock Inc · Struck by... (Not Elsewhere Classified)

A ROCK WAS HUNG IN THE JAW CRUSHER. EE REACHED DOWN TO PICK A ROCK UP TO THROW IN THE JAW TO HELP BREAK THE ONE HUNG UP. WHEN HE MOVED THE ROCK ANOTHER ONE ROLLED DOWN & SMASHED HIS LEFT THUMB . HE PULLED HIS HAND BACK FAST AND TORE THE THUMB NAIL OFF.

2000 · 1 incident

January 27, 2000 OK · Metal/Non-Metal front-end loader, scraper-loader operator, pan operator, payloader, scraper rig operator SLIP OR FALL OF PERSON
Youngman Rock Inc · Fall to the walkway or working surface

JACK WAS WALKING BACK TO THE LOADER, SLIPPED AND FELL WITH HIS LEG UNDER HIM.

1999 · 2 incidents

July 14, 1999 OK · Metal/Non-Metal loader head operator, roscoe operator POWERED HAULAGE
Youngman Rock Inc · Caught in, under or between (Not Elsewhere Classified)

WHILE REPAIRING SHROUD ON 5 BY 14 SCREEN MOTOR HIS HAND WAS PINCHED BETWEEN SHEAVE AND BEARING ON SIDE OF SCREEN. THE SCREEN WAS SHUT OFF AND LOCKED OUT FOR ALMOST 2 HOURS. APPARENTLY THE BEARING HAD SEIZED IN UP IN A CAM POSITION AND WHEN IT COOLED IT FREED UP AND BROKE OVER PULLING HIS HAND IN BETWEEN THE 2 OBJECTS

February 15, 1999 OK · Metal/Non-Metal MACHINERY
Youngman Rock Inc · Struck by falling object

TWO EE'S WERE TAKING FEEDER PAN AT JAW SITE DOWN. THEY CUT A BOLT OUT OF AN ANGLE IRON BRACE. IT FELL STRIKING HIM ACROSS HIS RIGHT FOREARM.

1998 · 1 incident

November 17, 1998 OK · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman MACHINERY
Youngman Rock Inc · Struck by... (Not Elsewhere Classified)

WE WERE RAISING CONVEYOR LEGS IN AIR. EE CAME OVER TO ASK SUPERVISOR A QUESTION & WHILE TALKING THE LEGS CAME UNHOOKED & EE WAS STRUCK BY THEM

1987 · 1 incident

August 11, 1987 OK · Metal/Non-Metal warehouseman, bagger, palletizer/stacker, store keeper, packager, fabricator, cleaning plant operator HANDLING OF MATERIALS
H D Youngman Contractor Inc · Caught in, under or between a moving and a stationary object

EMPLOYEE STATES HE WAS POSITIONING A ROCK TO FALL CORRECTLY ONTO THE FEEDER PAN & HIS HAND GOT BETWEEN THE ROCK & A PIECE OF ANGLE IRON