Mining Incidents

Kickapoo Sand & Gravel: 9 MSHA citations Metal/Non-Metal

Controlled by Derek J Hermann
Dunlap, Peoria County, IL  ·  Intermittent
MSHA Mine ID: 1102379

Kickapoo Sand & Gravel has $800 in proposed MSHA penalties and $0 outstanding across 0 contested dockets, plus health sampling and the full incident record.

Watch this mine

Email me when a new MSHA incident is filed at Kickapoo Sand & Gravel.

Fatalities
0
Total incidents
3
Years on record
2002–2006
Latest incident
Jun 2006
Compliance record
MSHA citations since 2001
9
citations
0
significant & substantial
$800
proposed penalties
$800
paid to date
100% of proposed penalties paid to date, a $0 gap.
Source: MSHA violations data, updated weekly.
Inspection activity
MSHA inspections since 2001
31
inspections on record
294
inspection hours
n/a
citations per 100 inspection hours
This rate is recorded citations divided by MSHA inspection hours, per 100 hours. It reflects inspection effort, not mine size or production.
Rate withheld: 294 inspection hours is too few for a stable rate. A minimum of 1,000 inspection hours is required.
Source: MSHA inspections data, updated weekly.

Kickapoo Sand & Gravel has $800 in proposed MSHA penalties and $0 outstanding across 0 contested dockets.

Penalty disposition
Differences between proposed and paid penalties reflect both settlements and conference reductions and amounts still owed. Outstanding is the balance currently owed.
$800
proposed penalties
$800
current assessed
$800
paid to date
$0
outstanding
9 assessments are final orders; 0 contested dockets.
As of the most recent assessment on 2021-07-07.
Source: MSHA assessed-violations and conference/litigation data, updated weekly.
Violation severity profile
Shares are computed over citations that carry the MSHA gravity and negligence coding; a small share of records are uncoded.
0.0%
significant & substantial
11.1%
high negligence or reckless
0.0%
reasonably likely or greater
22.2%
permanently disabling or fatal if injury occurs
Negligence coding: 0.0% none, 55.6% low, 33.3% moderate, 11.1% high, 0.0% reckless.
Source: MSHA violations gravity and negligence coding, updated weekly.
Health sampling
A sample is a point in time compliance measurement, not an individual exposure history. These figures describe MSHA sampling records and do not establish causation or personal dose.

Metal and nonmetal contaminants (personal samples)
Many samples are screening measurements of substances with no applicable exposure limit; they are counted as samples but excluded from every over-limit figure. Over-limit shares use only limit-tested samples.

Last sampled: 2016-11-22, 9 years ago
2
samples
0
limit-tested
Most sampled contaminants
  • Respirable dust, <.1mg2
Show the individual readings (2)
Date Contaminant Concentration Limit Conc / limit Occupation
2016-11-22 Respirable dust, <.1mg 0 Front-end Loader Operator
2010-06-02 Respirable dust, <.1mg 0 Front-end Loader Operator
Source: MSHA respirable dust, quartz, and noise sampling records, updated weekly. Metal/nonmetal contaminant figures come from MSHA's Personal Health Samples and Area Samples files (public record), updated weekly.
Ownership history
  1. Kickapoo Sand & Gravel Inc 1950 to present
Source: MSHA controller and operator history, updated weekly.
Workforce and production
Year Employees
2026 3
2025 3
2024 2
2023 2
2022 2
2021 2
2020 2
2019 2
2018 2
2017 2
2016 2
2015 2
2014 2
2013 2
2012 2
2011 2
2010 2
2009 2
2008 3
2007 5
2006 5
2005 5
2004 4
2003 4
2002 3
2001 4
2000 4
Source: MSHA quarterly employment and production, updated weekly.

Kickapoo Sand & Gravel sits in Peoria County, Illinois, where the Census mining category is 0.2% of county employment.

Local economic context
County figures come from the US Census Bureau's American Community Survey, 5-year pooled estimates, so the 2023 vintage covers 2019 through 2023. The Census category is 'mining, quarrying, and oil and gas extraction', which is broader than MSHA jurisdiction and includes oil and gas workers no mine employs. These figures describe the surrounding county, not this mine, and are not a factor in any specific incident.
Peoria County, Illinois · Population 179,831
0.2%
Mining share of county employment
$64,938
Median household income
Source: US Census Bureau, American Community Survey 2023 5-year estimates.
Quarterly safety rates
Citations per million reported employee-hours. Rates begin in 2000, when MSHA's quarterly employment data starts; earlier incidents are counted but cannot be rate-adjusted. Quarters under 100,000 reported hours are greyed: too few hours for a stable rate.
Citations per million employee-hours, as reported to MSHA
Quarter Hours worked Citations S&S Per 1M hrs
2026 Q2 1,060 0 0 0.0
2026 Q1 289 0 0 0.0
2025 Q4 723 0 0 0.0
2025 Q3 1,312 0 0 0.0
2025 Q2 1,199 0 0 0.0
2025 Q1 240 0 0 0.0
2024 Q4 563 0 0 0.0
2024 Q3 1,119 0 0 0.0
Show 97 earlier quarters
Quarter Hours worked Citations S&S Per 1M hrs
2024 Q2 871 0 0 0.0
2024 Q1 175 0 0 0.0
2023 Q4 521 0 0 0.0
2023 Q3 1,071 0 0 0.0
2023 Q2 1,079 0 0 0.0
2023 Q1 300 0 0 0.0
2022 Q4 517 0 0 0.0
2022 Q3 1,042 0 0 0.0
2022 Q2 1,163 0 0 0.0
2022 Q1 239 0 0 0.0
2021 Q4 799 0 0 0.0
2021 Q3 1,111 1 0 900.1
2021 Q2 1,274 0 0 0.0
2021 Q1 241 0 0 0.0
2020 Q4 614 0 0 0.0
2020 Q3 1,437 0 0 0.0
2020 Q2 1,633 0 0 0.0
2020 Q1 218 0 0 0.0
2019 Q4 802 0 0 0.0
2019 Q3 1,212 0 0 0.0
2019 Q2 1,408 0 0 0.0
2019 Q1 365 0 0 0.0
2018 Q4 893 0 0 0.0
2018 Q3 1,227 0 0 0.0
2018 Q2 1,203 0 0 0.0
2018 Q1 419 0 0 0.0
2017 Q4 665 0 0 0.0
2017 Q3 1,069 0 0 0.0
2017 Q2 938 0 0 0.0
2017 Q1 440 0 0 0.0
2016 Q4 763 0 0 0.0
2016 Q3 1,098 0 0 0.0
2016 Q2 1,029 0 0 0.0
2016 Q1 521 0 0 0.0
2015 Q4 759 0 0 0.0
2015 Q3 1,030 0 0 0.0
2015 Q2 851 0 0 0.0
2015 Q1 166 0 0 0.0
2014 Q4 826 0 0 0.0
2014 Q3 1,091 0 0 0.0
2014 Q2 1,002 0 0 0.0
2014 Q1 160 0 0 0.0
2013 Q4 677 0 0 0.0
2013 Q3 1,112 0 0 0.0
2013 Q2 773 1 0 1293.7
2013 Q1 50 0 0 0.0
2012 Q4 912 0 0 0.0
2012 Q3 1,102 0 0 0.0
2012 Q2 1,126 0 0 0.0
2012 Q1 476 0 0 0.0
2011 Q4 870 0 0 0.0
2011 Q3 1,035 0 0 0.0
2011 Q2 972 0 0 0.0
2011 Q1 264 0 0 0.0
2010 Q4 812 1 0 1231.5
2010 Q3 1,522 0 0 0.0
2010 Q2 1,355 1 0 738.0
2010 Q1 472 0 0 0.0
2009 Q4 862 0 0 0.0
2009 Q3 1,165 0 0 0.0
2009 Q2 1,316 0 0 0.0
2009 Q1 554 0 0 0.0
2008 Q4 1,128 0 0 0.0
2008 Q3 1,602 0 0 0.0
2008 Q2 1,782 1 0 561.2
2008 Q1 910 0 0 0.0
2007 Q4 1,453 0 0 0.0
2007 Q3 2,018 0 0 0.0
2007 Q2 2,220 1 0 450.5
2007 Q1 1,520 0 0 0.0
2006 Q4 1,768 0 0 0.0
2006 Q3 2,435 0 0 0.0
2006 Q2 2,404 0 0 0.0
2006 Q1 1,733 0 0 0.0
2005 Q4 1,732 0 0 0.0
2005 Q3 2,262 0 0 0.0
2005 Q2 2,495 0 0 0.0
2005 Q1 1,551 0 0 0.0
2004 Q4 1,813 0 0 0.0
2004 Q3 2,402 0 0 0.0
2004 Q2 2,087 0 0 0.0
2004 Q1 1,155 0 0 0.0
2003 Q4 1,583 1 0 631.7
2003 Q3 1,940 1 0 515.5
2003 Q2 1,831 0 0 0.0
2003 Q1 1,100 0 0 0.0
2002 Q4 1,549 0 0 0.0
2002 Q3 1,752 0 0 0.0
2002 Q2 1,725 0 0 0.0
2002 Q1 1,057 0 0 0.0
2001 Q4 1,669 1 0 599.2
2001 Q3 2,333 0 0 0.0
2001 Q2 1,911 0 0 0.0
2001 Q1 1,610 0 0 0.0
2000 Q4 1,431 0 0 0.0
2000 Q3 2,339 0 0 0.0
2000 Q2 2,228 0 0 0.0
No fatalities recorded at this mine.

Reportable incidents

3 on file

2006 · 1 incident

June 13, 2006 IL · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver POWERED HAULAGE
Kickapoo Sand & Gravel Inc · Struck against a moving object

Employee was backing tandem dumptruck up a gradual incline (dry & solid) to add material for a new road. Truck upset because rear-passenger tires got too close to the edge. Employee tumbled inside cab and received contusions and a neck sprain.

2005 · 1 incident

October 17, 2005 IL · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver SLIP OR FALL OF PERSON
Kickapoo Sand & Gravel Inc · Fall onto or against objects

Injured was near a pile of 4"-8" Limestone evaluating where the cleanest rock was available at the pile. He stepped onto a stray rock on the ground. His leg buckled, and he fell. Resulted in sprained ankle.

2002 · 1 incident

July 3, 2002 IL · Metal/Non-Metal truck driver HANDLING OF MATERIALS
Kickapoo Sand & Gravel Inc · Caught in, under or between (Not Elsewhere Classified)

THE TAILGATE WAS SLIGHTLY PROPPED OPEN W/EXCESS MATERIAL. WITH HIS LEFT INDEX FINGER ON LOCK SHAFT, HE STARTED TO PULL THE BOTTOM OF THE TAILGATE OPEN TO ALLOW THE EXCESS TO FLOW OUT. HIS LT T HUMB WAS SLIGHTLY TOO HIGH, & IT GOT PINCHED BETWEEN THE SHAFT & THE LATCH. HIS THUMBNAIL WAS ALMOST COMPLETELY TORN OFF. THIS DID NOT INVOLVE THE MINE SYSTEM OR ANY MINE EQUIPMENT.