Search the record

EMPLOYEE WAS PULLING A THREE (3) TON COME-A-LONG UP FROM THE GROUND WHILE ON C-1 CONVEYOR.

EMPLOYEE WAS USING A PRY BAR TO SLIP SKIRTING INTO PLACE ON CONVEYOR PRYBAR SLIPPED EMPLOYEES LEFT HAND HIT AN ANGLE IRON SUPPORT

EE WAS CUTTING THE BANDS OFF A BAD FLOAT FRAME. THE FLOAT FRAME WAS MISSING ON FLOAT WHEN THE EE CUT THE BANDS. THE FLOAT FRAME SPUN AND HIT THE EE'S KNEE.

EMPLOYEE WAS USING A UTILITY RAZOR KNIFE TO STRIP WIRE KNIFE SLIPPED & CUT EMPLOYEES RIGHT HAND LACERATION REQUIRED FOUR (4) SUTURES

EMPLOYEE WAS LINING UP A REAR RIDE CYLINDER ON A 777B CAT HAUL TRUCK WHEN THE CYLINDER CAME LOOSE AND THE PRY BAR THE EMPLOYEE WAS USING HIT EMPLOYEE IN THE HEAD.

EMPLOYEE WAS INSTALLING A WEAR PLATE IN CHUTE. ANOTHER EMPLOYEE WAS PUNDING THE PLATE WITH A HAMMER WHEN THE HAMMER SLIPPED & STRUCK THE FIRST EMPLOYEE IN THE HEAD.

EMPLOYEE WAS BENDING OVER FROM A SITTING POSITION EMPLOYEE MOVED & FELT A MUSCLE PULL WHILE HE MOVED

EMPLOYEE WAS STARTING A CUT WITH A HO KNIFE OF SOME RUBBER BELTING. EMPLOYEE WAS MOVIGN HIS HAND BEHIND THE HOT KNIFE. THE KNIFE CAME OUT OF THE RUBBER AND WAS PUSHED UPWARD WITH HIS RIGHT HA ND AND CROSSED OVER HIS LEFT HAND CAUSING LACERATION REQUIRING 7 STITCHES.

PUTTING A TOOTH ON A LOADER BUCKET. TAPPING THE TOOTH IN PLACE WITH A HAMMER.

EMPLOYEE WAS TRYING TO CLEAR JAMMED ROCK FROM #3 BELT TAILPULLEY. EMPLOYTEE CUT PINKY FINGER OF RIGHT HAND ON A CROWBAR.

TIGHTENING BOLT WHEN BOLT BROKE AND CAUSED EMP HAND TO MOVE FORWARD PC OF STEEL

REPAIRING PLATE IN HOPPER,STEEL WEDGE RELEASED FLEW BACK HIT EMP IN MOUTH

EMPLOYEE WAS SWEEPING LOADING DOCKS WHEN THE BACK OF HIS RT HAND CAUGHT ACROSS A PIECE OF METAL

EMPLOYEE WAS WORKING ON A WELDER,SOCKET SLIPPED FROM DRAIN PLUG CAUSING EMPLOYEE TO FALL FORWARD CUTTING LEFT AHND INDEX FINGER'S KNICKLE.LACERATION REQUIRED THREE SUTURES.

CUTTING A HOSE WHILE HOLDING IT IN HIS LEFT HAND. THE HOSE SLIPPED AND THE RAZOR KNIFE CUT INTO HIS LEFT FOREARM.

EMPLOYEE WAS INSTALLING FINGER GATES IN THE CHUTES. EMPLOYEE STRUCK FINGER GATE WITH A HAMMER CAUSING PIECE OF METAL TO FRAGMENT OFF. THE FRAGMENTED PIECE OF METAL LODGED ITSELF IN THE UPPER L IP ON THE RIGHT SIDE.

EMPLOYEE WAS USING A HOT KNIFE. THE KNIFE SLIPPED CUTTING THE EMPLOYEE'S LEFT HAND. EMPLOYEE REQUIRED SUTURES.

WHILE THE EMPLOYEE WAS WORKING ON A PIECE OF EQUIPMENT, THE WRENCH WHICH WAS HOLDING A BOLT SLIPPED THROWING HIS HAND TOWARDS HIS FACE. THE EMPLOYEE'S HAND MADE CONTACT WITH HIS FACE, PUNCHING HIS LEFT JAW. EMPLOYEE UPON CONTACT BITE DOWN ON TONGUE WHICH REQUIRED FIVE (5) SUTURES.

EMPLOYEE WAS PULLING TO LOOSEN BOLTS IN A MILL ALSO LIFTING HEAVY PARTS FELT PAIN IN LEF SIDE PAIN DEMINISHED IN DAY OR TWO PAIN RETURNED A WEEK LATER LEFT SIDE OF ABDOMEN SWOLLEN EMPLOYEE EXM INED BY PHYSICIAN ON 02-21-90 FOUND LEFT SIDE HERNIA

EMPLOYEE WAS HOLDING A STEEL DRIFT AGAINST THE INNER RACE OF #2 MILL FAN BEARING. ANOTHER EMPLOYEE HIT THE DRIFT WITH A 2 1/2 LB. HAMMER. UPON IMPACT, A SMALL PIECE OF THE BEARING CHIPPED OFF AND FLEW INTO THE INJURED EMPLOYEE'S HAND.

CLOSING STEEL DOOR ON HAMMERMILL. REACHING FOR BAR WI TH R HAND TO SECURE TRAP DOOR DOOR SLIPPED FELL ON HIS L HAND.

EMPL WAS USING A PINCH BAR TO REMOVE A SHEAVE PULLEY FROM THE WILLIAMS MILL WHILE HE WAS PULLING ON THE PINCH BAR TO TRY TO REMOVE THE SHEAVE HE STRAINE DHIS LOWER BACK THE DR DIAGNOSED THE IN JURY AS A HERNIATED DISC OF THE LUMBAR SPINE WITH NERVE ROOT IRRITATION

EMPL HAD 6"X36" SIDE RUBBER ON GROUND. ATTEMPTING TO CUT NOTCHES WHERE BOLTS OF SHORT B AND WOULD GO RAZOR CUT EASIER THAN HE EXPECTED & SLIPPED OUT OF GROOVE IN RUBBER CONTACTING KNEE GIVING CUT REQUIRING SUTURING & ANITIOTICS.

EMPL WAS SHOVELING STONE OFF CATWALK AROUND CRUSHER ON A RAINY DAY SHOVEL HANDLE SLIPPED INJURING HIS WRIST

EMPL USING UTILITY KNIFE CUTTING RUBBER FLARE FOR CONVEYOR BELT AND WHEN NOTCHING OUT HOLES.KNIFE SLIPPED CUTTING PALM OF LEFT HAND.

GRINDING ON ASPHALT ELEVATOR FROAMES WHEN HE GOT PC OF STEEL IN R. EYE.

EMPL HAD PUMP ON JACK RAISING IT INTO POSITION. PUMP FELL OFF JACK HIT EMPL RIOGHT ANKLE.

EMPL WAS ADDING 150' LONG 1" DIA. PENNENT WIRE TO STARBOARD TRIGERY WIRE. HE WAS UNSHACKLING PENNANTIVE FROME MC LEADER CABLE WHEN IT BECAME APPARENT THAT SHACKLE PIN COULD NOT BE REMOVED BY DUE TO TENSION ON WIRE. HE THEN PROCEEDED TO USE 6' PRY BAR TO KNOCK PIN OUT. WHILE HITTING PIN HE MISSED & CUT MIDDLE FINGER OF LEFT HAND.

EMPLOYEE LIFTED A LARGE SOCKET TO TIGHTEN NUT ON JAW CRUSHER. HE TURNED AND FELT A SHARP PAIN IN HIS BACK AND COULDNT STRAIGHTEN OUT FOR 5 MINTUES.

EMPLOYEE WAS BA9RING ROCK. HE PINCHED HIS THUMB BETWEEN BAR AND ANGLE IRON. LEFT THUMB NAIL LOOSE AND HANGING BY ONE SIDE.

EMPLOYEE WAS BA9RING A ROCK THE BAR SLIPPED AND HAND HIT PIPE CAUSING LACERATION OF LEFT HAND REQUIRED 5 SUTURES

SLEDGING ROCK IN CRUSHER,SLEDGE GLANCED OFF BETER AND STRUCK IN EMPL INSIDE RIGHT KNEE.