Search the record

TRYING TO UNPLUG GYPSUM HOPPER BY BEATING ON HOPPER WITH BAR AND SPRAINED LOWER BACK.

EMPLOYEE WAS REMOVING A HANG UP FROM THE PRIMARY JAW CRUSHER USING A ROCK WEDGE. THE WEDGE KICKED BACK DRIVING THE WEDGE HANDLE INTO THE OPERATOR'S CHIN CAUSING A LACERATION REQUIRING MEDICAL ATTENTION.

EE WAS HITTING A PIN ON THE STAMLER CHAIN WITH A SLEDGE HAMMER. ANOTHER EE LEANED DOWN. WE THINK HE DID THIS TO HOLD THE CHAIN. WHEN EE HIT THE PIN, HAMMER BOUNCED OFF THE PIN HITTING THE OTHE R EE IN THE FACE.

USING 4# SLEDGEHAMMER TO HIT IRON ORE HOPPER REPETITIVELY AND STRAINED HAND. RESTRICTED DUTY.

SHOVLING ON BURNER FLOOR AND STRAINED LEFT ARM.

EE WAS CLOSING THE DOOR OF THE HAMMERMILL WITH A YALE 1 1/2 TON COME ALONG WHEN THE DOOR SLIPPED OUT OF ALIGAMENT. HE RE-ATTACHED THE COME ALONG TO REALIGN THE DOOR. EE WAS WONDERING IT AN AWK WARD POSTION WITH THE COME ALONG WHILE WORKING TUHE COME ALONG. RIGHT ARM GREW TIRED AND HE SWITCHED TO HIS LEFT. HE STRAINED WITH HIS LEFT ARM AND FELT THE INJURY OCCUR.

SLIDING MOTOR OFF OF A PAD & BAR SLIPPED. HE SPRAINED RIGHT ELBOW RESULTING IN RESTRICTED DUTY.

EE WAS IN CLINKER COOLER DUST COLLECTOR HELPING 2 OTHER EES PULL A SCREW BACK TOGETHER USING A COMEALONG. HE WAS KNEELING ON ONE KNEE PULLING THE COMEALONG WHEN HE FELT A "POP" & THEN BACK PAI N.

EE WAS SITTING ON A STEEL PLATE SECURED BY A CHAIN HOIST. THE HOIST SLIPPED, CAUSING HIM TO FALLDOWN INTO A CHUTE. HE RECEIVED 2 STITCHES IN HISRIGHT KNEE.

ADJUSTING ROLLSON COAL MILL AND STRAINED RT. SHOULDER.

HITTING PIPE WRENCH WITH PALM OF HAND CAUSED CONTUSION.

EMPLOYEE WAS ATTEMPTING TO CLEAN A SCREEN THAT HAD BLINDED OVER WITH A CHIPPING HAMMER. WHILE DOING SO THE EMPLOYEE SLID HIS SAFETY GLASSES TO THE LOWER BRIM OF HIS NOSE, CONTINUING TO CLEAR THE SCREEN THE HAMMER THE EMPLOYEE WAS USING STRUCK SOME MATERIAL THAT FLEW UP AND STRUCK THE EMPLOYEE IN THE EYE.

EE WAS STANDING ON TEMPORARY SCAFFOLD AND WAS USING A PRY BAR WHEN HE FELL 3'. PRY BAR STRUCK HIM ON TOP OF HIS HEAD. HE BRUISED HIS HIP IN THE FALL.

CUTTING RUBBER TO MAKE A SLEEVE AND KNIFE CUT THROUGH RUBBER CUTTING LEFT INDEX FINGER REQUIRINGSTITCHES.

KNOCKING DOWN DOORS WITH HAMMER AND STRAINED BACK.

EE WAS ATTEMPTING TO REPAIR A SET OF JUMPER CABLES WITH A RAZOR KNIFE, WHILE DOING SO THE KNIF SLIPPED CAUSING A LACERATION TO THE EE'S LEFT PALM. (STITCHES WERE REQUIRED)

CUTTING BOX WITH KNIFE AND CUT LEFT INDEX FINGER.

USING BAR TO TRY & MOVE BACKSTOP BACK INTO PLACEBAR SLIPPED CAUSING EE TO FALL FORWARD, INJURINGHIS SHOULDER

PRYING A CAGE OUT OF A DUST COLLECTOR BAG USING A T-HANDLE. CAUGHT FINGER BETWEEN T-HANDLE AND DOOR.

WHILE PRYING ON BAUXITE CHUNKS WITH BAR, EMPLOYEE EXPERIENCED PAIN IN RIGHT SHOULDER.

EE WAS ATTEMPTING TO UNJAM A ROCK IN THE ROCK BOX USING A PRY BAR.. WHILE ATTEMPTING TO DO THIS THE ROCK FELL THRU INJURING EE'S RIGHT ARM & ELBOW

CUT HAND ON PIECE OF METAL.

EMPLOYEE WAS USING A HAMMER AND A CHIPPING HAMMER, WHEN A PIECE OF METAL BROKE OFF, AND LODGED INTO HIS LEFT HAND.

WHILE REMOVING BEARING ON CRUSHER MOTOR WITH HAMMER, EE CAUGHT PINKY BETWEEN HAMMER HEAD AND MOTOR, SMASHING HIS FINGER.

EMPLOYEE WAS WELDING WHEN HE WAS HIS IN THE BACKWITH A CLINKER BREAKER HAMMER.

WHILE REMOVING A DRIVE SEGMENT ON D9 DOZER, A PIECE OF STEEL CHIPPED OFF THE SEGMENT AND STRUCK EMPLOYEE IN THE NECK.

EMPLOYEE WAS REPAIRING A HYDRAULIC LINE ON A PIECE OF HEAVY MACHINERY. HE USED A BOX KNIFE RAZOR BLADE ON A PIECE OF RUBBER HOSE, SLIPPED, AND CUT FINGER.

STRUCK MILL LINER W HAMMER, WHEN IT SWUNG LOOSE IT STRUCK EE IN CHEST, CAUSING CONTUSION TO CHEST AND SHOULDER.

AFTER CLEANING HARDENED CEMENT MATERIALS FROM THE TURNHEAD, FEEDBOX AND TRIPPER WITH A METAL BAR, THE EMPLOYEE EXPERIENCED PAIN IN RIGHT ARM.

USING PRYBAR TO POSITION A PLATE, PLATE SLIPPED, A PIECE SHIPPED OFF AND STRUCK EE IN FACE.

ALIGNING MILL LINES WITH SLEDGE HAMMER & A PIECEOF METAL CHIPPED OFF