Search the record

WHILE UNDOING BOLTS FROM MACHINE, A PIECE OF A RUSTY METAL BOLT GOT INTO THE EMPLOYEES RIGHT EYE.

EE STRUCK HAND WITH HAMMER WHILE HITTING A DRIVE SHAFT.

EE WAS CUTTING BAND ON A BUNDLE OF EMPTY BAGS. HE WAS PULLING THE KNIFE TOWARDS HIM. WHEN HE CUT THROUGH THE STRAP THE KNIFE CONTINUED ON AND HE STABBED HIMSELF ON THE INSIDE OF HIS LEFT THIGH .

WHILE ON CATWALK TIGHTENING BOLT ON APRON PAN EE LEANED OVER A PIECE OF I-BEAM SUPPORT WHILE PULLING ON A WRENCH HE FORCED HIS LOWER LEFT RIBS AGAINST THE I-BEAM RESULTING IN BRUISED RIB

EE STRUCK HIS HEAD AGAINST A BOLT ON A BRACKET WHEN THE WRENCH HE WAS USING TO FREE A PTO CABLEUNDER A STOCK TRUCK SLIPPED. HE JERKED HIS HEAD TO AVOID BEING STRUCK BY THE WRENCH, BUT STRUCK HIS HEAD AGAINST THE BOLT.

EE'S HAND WAS CAUGHT BETWEEN A STEEL BAR AND A CRUSHER PLATOFRM WHILE CLEARING A HANGUP. FIRST MEDICAL TREATMENT ON 7-17-02.

EE WAS HEATING UP COUPLING WITH A ROSE BUD TORCH SO THAT THE COUPLING COULD BE REMOVED. 2 OTHER EES WERE STRIKING THE COUPLING WITH 20# DEAD BLOW MALLETS. ONE OF THE MALLETS GLANCED OFF OF THE COUPLING STRIKING EE ON THE RIGHT SIDE OF HIS FACE.

EE WAS CUTTING BUT HAD HIS LEFT HAND DIRECTLY ACROSS FROM HIM. THE CUTTING UTENSIL SLIPPED AND HE CUT HIS LEFT THUMB. (THE DELAY IN REPORTING THIS WAS NOTED DURING AN INTERAL AUDIT).

WHILE ATTEMPTING TO KNOCK A TOOTH OUT OF A LOADER BUCKET A METAL FRAGMENT PUNCTURED HIS RIGHT ARM.

WHILE HAMMERING METAL WITH A SLEDGE HAMMER A PIECE OF METAL FLEW OFF AND STRUCK HIS RIGHT LOWER LEG CAUSING A PUNCTURE WOUND.

EE WAS REPLACING THE COUPLING BETWEEN THE CUTTER HEAD MOTOR AND GEAR BOX. WHILE DRIVING THE COUPLING ON W/ A HAMMER, HIS HAND SLIPPED AND HE STRUCK HI LEFT THUMB.

OUTSIDE/SWINGING A SLEDGE HAMMER TO DRIVE A PULLEY SHAFT BACK INTO BEARING HOUSING #3 FEED WEIGHT DISPLACED ON LEFT LEG/HEARD AND FELT KNEE SNAP/IMMEDIATE PAIN TIGHT ENCLOSED AREA.

EMPLOYEE WAS UNPLUGGING A CHUTE.

OVERSHOT FELL OUT OF THE MAST AND STRUCK EMPLOYEE ON THE HEAD, EMPLOYEE WAS WEARING A HARD HAT.

A FUEL/LUBE TRUCK DRIVER WAS CHANGING THE TEETH ON A 990 LOADER, USING A HAMMER 3 LB WHEN UPON STRIKING THE PIN A METAL PIECE HIT HIS UPPER LEFT LEG.

EE WAS CUTTING A PIECE OF RUBBER BELTING WITH A RAZOR KNIFE. WHILE PULLING THE KNIFE TOWARD HIM IT SLIPPED AND HE STABBED HIMSELF IN THE LEFT FOREARM.

EE WAS USING A CHISEL BRAND NEW TO SPREAD LINKS ON A TRACK SYSTEM. THE CHISEL SNAPPED IN HALF AND CUT HIM ABOVE THE RIGHT EYEBROW.

EMPLOYEE AND TWO OTHER EMPLOYEE'S WERE INSTALLING A WERA SLEEVE ON SHAFT WITH A HAMMER AND A PIECE OF BRASS. WHILE THE OTHER EE HIT THE BRASS PIECE ON ONE SIDE, IT SLIPPED AND HIT EE'S RIGHT T HUMB.

PULLING HARD ON A RATCHET TO BREAK A NUT LOOSE ON THE PLANT. ACUTE LS STRAIN

WHILE PRYING WITH PRY BAR AT THE 4X8" CHUTE, UNLOADING ROCK FROM THE CHUTE, ANOTHER ROCK HIT BARTHEN HIT EMPLOYEE'S RIGHT WRIST.

EE WAS TYING REBAR WHEN THE PLIERS SLIPPED OFF THE WIRE AND STRUCK HIM IN THE LOWER LIP.

EMPLOYEE WAS SWINGING A SLEDGE HAMMER WHILE DOING MAINTENANCE IN THE PLANT AND STRAINED HIS RIB CAGE.

LODGED ROCK IN JAW CRUSHER INJURED ATTEMPTED TO DISLODGE ROCK WITH PRY BAR

EE WAS WORKING ON A CRUSHER. HE GOT A PRYBAR STUCK TRYING TO REMOVE A CHIPPING HAMMER. HE COULD NOT GET HAMMER OUT SO HE THREW PRYBAR DOWN ON GROUND. WHEN HE THROW PRYBAR DOWN A PIECE OF METAL WENT INTO TO HIS LEFT EYE. NO SAFETY GLASSES BEING WORN AT TIME.