Mining Incidents

Search the record

Every injury and fatality MSHA has on file. Filter by state, year, sector, classification, experience, or any keyword from the investigator's narrative.

Total incidents
273,193
Of which fatal
1,202
Years on record
2000–2026
Classifications
20
Filters 2 active
Time period
Experience at time of incident

Alert me on this search

Email me when a new incident matches these filters. One confirmation email; unsubscribe anytime.

The record

18 matching records

Showing all 18
September 5, 2023 TN · Metal/Non-Metal prep plant foreman, supervisor, mill plant supervisor, kiln supervisor HANDTOOLS (NONPOWERED)
Blue Water Industries · Caught in, under or between a moving and a stationary object

While EE was attempting to remove rocks from around a gate inside a chute that had stopped up, EE struck one of the rocks with a hammer that allowed the gate to fall. The gate struck the EE on the left thumb resulting in a minor fracture to the tip of the left thumb requiring only a small splint applied by the doctor.

August 17, 2020 AL · Metal/Non-Metal quality control technician, laboratory technician, laboratory assistant HANDTOOLS (NONPOWERED)
Blue Water Industries · Struck by... (Not Elsewhere Classified)

While attempting to puncture a 1-1/2" rubber hose with EE's non-locking pocket knife, the EE had the blade close on index finger causing a laceration across the first knuckle above the finger nail of gloved right hand. At the emergency room 5 stitches were needed to close the wound.

April 3, 2018 TN · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDTOOLS (NONPOWERED)
Blue Water Industries · Over-exertion in pulling or pushing objects

Employee was using a pipe wrench to loosen the curtain bolts on the Stedman crusher. As they were pulling on the wrench they felt a pull or strain in right inner thigh/groin area. Employee immediately stopped performing the task. Employee refused medical treatment at the time; however went to the ER later that night where they were diagnosed with a strain and given 1 day off.

December 29, 2017 AL · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDTOOLS (NONPOWERED)
Blue Water Industries · Caught in, under or between a moving and a stationary object

EE was helping change hammers in the Stedman. EE had a pry bar wedging one hammer up to assist tow other EE to install the hammer into place. Hammer went into place but caused ee hand to be pinched between bar & hammer.

March 15, 2017 AL · Metal/Non-Metal welder (shop) HANDTOOLS (NONPOWERED)
Blue Water Industries · Over-exertion (Not Elsewhere Classified)

While replacing and tightening a bolt on a plant employee felt/heard a pop in right shoulder. After tightening a bolt on a plant, employee started to feel pain and had difficulty moving arm. Medical attention resulted in restricted work activity.

January 19, 2015 AL · Metal/Non-Metal bulldozer operator, universal operator, heavy equipment operator, operating engineer HANDTOOLS (NONPOWERED)
Blue Water Industries · Struck by... (Not Elsewhere Classified)

While replacing the skirt rubber at pioneer #3, noticed the hole was not correct and as employee was re-cutting the hole, his knife blade slipped cutting the top joint of his left thumb. First aide performed at facility. ER treated and released day of injury.

July 24, 2010 AL · Metal/Non-Metal welder (shop) HANDTOOLS (NONPOWERED)
Blue Water Industries · Struck by... (Not Elsewhere Classified)

While repairing a conveyor belt, EE was cutting a hole in the belt using a utility knife; the knife slipped and severely cut EE's left hand. EE returned to restricted work activity on 7/29/10.

June 5, 2008 AL · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDTOOLS (NONPOWERED)
Hoover Inc · Struck by... (Not Elsewhere Classified)

Employee was moving rocks out from under jaw. One rock was too big to move so he was breaking rock with a sledge hammer when a piece of the rock hit his leg causing swelling to the right leg. After receiving medical attention, was released to regular work on the day of the injury. Did not report to work Friday 6/6/08, stating due to injured leg.

May 15, 2006 AL · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDTOOLS (NONPOWERED)
Blue Water Industries · Struck by... (Not Elsewhere Classified)

Employee was using punch & sledge hammer to punch holes into conveyor belt. Accidently missed punch when swinging sledge hammer & hit his thumb instead. Resulted in a dislocation to his left thumb. No lost time as of today but is currently on restricted work.

April 8, 2006 AL · Metal/Non-Metal welder (shop) HANDTOOLS (NONPOWERED)
Blue Water Industries · Struck by... (Not Elsewhere Classified)

EE was using a sledge hammer to beat caps out of crusher. A foregin material from either caps or sledge hammer entered EE's right hand between thumb and index finger. He was taken to Hospital and was referred to hand specialist. Work duty is modified. Surgery scheduled for 4/20/06.

July 5, 2005 AL · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDTOOLS (NONPOWERED)
Blue Water Industries · Struck against stationary object

Employee was shoveling in secondary plant. Shovel struck against a metal support leg jarring her right hand and wrist. Employee sought medical attention (7-6-05) at which time she was prescribed medication and placed on light duty for one week.

January 17, 2005 AL · Metal/Non-Metal haul/off road/coal/ore/pit/quarry/rock/rubber tire truck driver, transportation truck driver HANDTOOLS (NONPOWERED)
Blue Water Industries · Struck by flying object

C-CLAMP WAS PUT ON PIECE OF METAL ON WASHING SCREEN TOWER, WHEN PIECE OF METAL WAS HIT WITH A HAMMER THE C-CLAMP BROKE HITTING EE IN THE LEFT KNEE CAP. EE SOUGHT MEDICAL ATTENTION DATE OF INJURY, RETURNED TO WORK, NO RESTRICTIONS. EE RETURNED TO PHYSICIAN ON 01/20/05. EE TO REMAIN OFF WORK UNTIL MRI RESULTS RECIEVED.

December 30, 2004 TN · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDTOOLS (NONPOWERED)
Blue Water Industries · Struck by flying object

EE WAS CLEANING BOLT HEADS WITH CHIPPING HAMMER. HAMMER CAME OFF HANDLE AND HIT EE ON RIGHT EYE.

October 11, 2002 AL · Metal/Non-Metal mine manager, mine foreman, mine owner HANDTOOLS (NONPOWERED)
Blue Water Industries · Struck against stationary object

WRENCH SLIPPED OFF NUT AND EMPLOYEE SLIPPED ON GUARD AND STRADDLED IT, LANDING ON HIS LEFT GROIN AREA - WAS WORKING ON WASHING SCREEN. NO MEDICAL ATTENTION NEEDED AT TIME OF INJURY - NOTIFIED BY SUPERINTENDENT OF MEDICAL ATTENTION RECEIVED TODAY (10-22-02).

October 26, 2000 AL · Metal/Non-Metal mine manager, mine foreman, mine owner HANDTOOLS (NONPOWERED)
Blue Water Industries · Caught in, under or between (Not Elsewhere Classified)

EMPLOYEE LOOSENING BOLT ON 300 HP MOTOR AT OLD JAW #521004 AND MOTOR SLID FORWARD AND RACHET PINNED EMPLOYEE BETWEEN THE FRAME AND MOTOR ABRASION OF RIGHT FIBULA.

October 3, 2000 TN · Metal/Non-Metal laborer, blacksmith, bull gang, parts runner, roustabout, pick-up man, pitman HANDTOOLS (NONPOWERED)
Blue Water Industries · Struck by... (Not Elsewhere Classified)

EMPLOYEE WAS WELDING ON A LIFTING HOOK & WORKINGWITH CHAIN HOIST. LIFTING HOOK CAME OFF WHILE USING CHAIN HOIST. HOOK HIT HIM ON RIGHT HAND WHENWELD BROKE.

Showing all 18