Search the record

EMPLOYEE WAS CUTTING CONVEYOR BELT KNMIFE SLIPPED & CUT LEG (SUTURES)

54736YEE WAS PRYING OUT OF SCREEN FRAME-FLAG BROKE OFF AND FELL ON THUMB CUTTING IT (4 STITCHES).

EMPLOYEE WAS CUTTING CONVEYOR BELT-KNIFE SLIPPED; CUT FACE.

EMPL WAS STRETCHING FENCE USING CLAW HAMMER FENCE SLIPPED CUT THUMB.

EMPLOYEE WAS CUTTING CONVEYOR BELTING, KNIFE SLIPPED AND HE CUT HIS THUMB.

EMPLOYEE WAS CUTTING BELTING- KNIFE SLIPPED (STITCHES)

INJURED WAS INSTALLING A SEAL IN CYLINDER USING A SCREWDRIVER AS A PRY TOOL IT SLIPPED AND HE PUNCTURED HIS HAND INFECTION DEVELOPED HOSPTILIZED.

EMPLOYEE WAS CHAINGING PLANT SCREEN BEARING. HIT WITH HAMMER. PIECE BROKE OFF-END STRUCK EMPLOYEE.

WAS INSTALLING A SPRING ON A R-35 EUCLID TRUCK USING A CHAIN HOIST-CHAIN BROKE LETTINGA FRAME FALL ON EMPLOYEE GLANCING BLOW.

INSTALLING MANIFOLD ON DOZER-DROPPED ON FEET.

USING DRY BAR TO ALIGN CHUTE-BAR SLIPPED AND RIGHT INDEX FINGER STUCK PIECE OF STEEL PLATING.

BOULDER HUNG IN CRUSHER EMPLOYEE USING A LOADER TOOTH TO WEDGE AGAINST BOULDER TOOTH SHATTERED PIECES STRUCK INJURED EMPLOYEE.

CUTTING CONVEYOR WIPER BELT KNIFE SLIPPED CUT HAND.

EMPLOYEE WAS PULLING ON WRENCH AND SPRAINED NECK MUSCLES.

BUILDING CATWALK ON PORTABLE CRUSHER MASHED FINGER BETWEEN CHAIN AND CATWALK.

INSTALLING TRACKS ON DRAGLINE USING 3/4" EYE BOLT TO PULL TRACKS ON MACHINE-BOLT BROKE AND STRUCK HAND.

CUTTING CONVEYOR BELT WITH POCKET KNIFE-IT SLIPPED AND CUT PALM OF LEFT HAND.

EMPLOYEE WAS PUSHING POSTIONS OUT OF A DIESAL ENGINGE, USING A HAMMER HANDLE, HANDLE SLIPPED OFF CONNECTOR ROD END STRUCK FINGER, MASHING IT AGAINST BLOCK.

EMPLOYEE WAS CUTTING HOLES IN BELT LAGGING, KNIFE BLADE BROKE, KNIFE SLIPPED, CUTTING EMPLOYEEHS HAND.

EMPLOYEE WAS TIGHTENING BOLTS ON TRACK ON D-8 DOZER, WRENCH SLIPPED AND HE STRUCK HIS HAND AGAINST THE DOZER FRAME.

UNDER FEED HOPPER TIGHTENING BOLTS.

HE WAS IN THE TUNNEL CHIPPING A ROCK OUT OF THE CHUTE USING A PIECE OF REBAR AS A CHIPPING TOOL, WHEN THE THE REBAR SPLIT AND CUT HIS HAND.

USING SLEDGE HAMMER TO KNOCK ANVILS OUT OF IMPACTOR CRUSHER HIT HAND AGAINST ANVIL

EMPLOYEE HAD HAND ON DOZER TRACK HELPING EMPLOYEE ROLL TRACKS FOR REPAIR BAR CAUGHT FINGER

EMPLOYEE WAS USING A 20 FT PIECE OF ANGLE IRON TO FREE GRAVEL STUCK IN HOPPER. HE STRUCK THUMB AGAINST SIDE OF HOPPER.

REPLACING TEETH3ON DRAGLINE BUCKET-WAS DRIVING THEM ON WITH HAMMER SLIVER OF STEEL CAME OFF TOOTH AND PENETRATED EMPLOYEES SHOULDER.

CUTTING GROND C5BLE WITH HACKSAW - SAW SLIPPED, CUT LEFT THUBM

REPLACING TRACK3PINS ON MW95 DRAGLINE USING DRIFT PIN AND SLEDGE HAMMER. WHILE DRIVING PIN, SLIVER OF STEEL STRUCK HIM ON LEFT ARM

WHILE DIGGING O6T MATERIAL IN CRUSHER HE PULLED MUSCLE IN HIS SHOULDER.

I.NAME WAS STA3DING NEAR HIS LOADER WHILE A MECHANIC WAS HAMMERING ON A BEARING WHEN A SHAVING CAME OFF & WENT INTO HIS LEG

EMPLOYEE WAS LO2SENING NUTS ON SHORTHEAD CONE CRUSHER WITH A SLEDGEHAMMER WHEN STRAIN OCCURRED

DRIVING BUSHING3OUT OF DRILL STEEL WITH SLEDGE HAMMER WHEN PIECE OF SLEDGE HAMMER CHIPPED OFF AND PENETRATED STOMACH

EMPLOYEE WAS TI1HTENING NUT ON CONE CRUSHER WITH SLEDGE HAMMER

EMPLOYEE WAS DR3VING CHISEL WHEN IT CAME OUT AND HIT HIM IN THE MOUTH

EE WAS PULLING3ON A WRENCH TRYING TO LOOSE A DRAIN PLUG.

EMPLOYEE WAS WORKING ON LOADER SHAFT WHEN SOCKET SLIPPED AND HE HIT HIS HAND ON TEETH NEXT TO IT.

EMPLOYEE WAS TGAKING A WORN BIT OUT OF A DRILL WITH A WRENCH WHEN HE CAUGHT HIS FINGER BETWEEN THE WRENCH AND THE BIT

EE SHOT BY DEPUTY SHERIFFS\S OFFICER. WHILE SHERIFFS PEOPLE WERE ON THEIR WAY I.NAME TOOK THE TIRE TOOL & BROKE THE BACK WINDOW, I.NAME THEN TOOK ALL OF HIS CLOTHES OFF & CRAWLED THRU THE WIN DOW & INTO THE FRAME WHICH WAS FULL OF DIESEL. I.NAME RUBBED DIEASEL OVER HIMSELF. HE CAME OUT RAN TO THE SQUD CAR GOT A SHOTGUN OUT & FIRED AT THE OFFICER.

INJURED WAS IN TIME SHACK WORKING ON TRANSMISSION WHEN KNIFE FOLDER UP AND CUT FINGER.

EMPLOYEE WAS WORKING ON HOOKING A CHAIN TO A LOADER WHEN THE CAIN SLIPPED AND LANDED ON HIS FOOT.