Search the record

When using a chain hoist to rig a conveyor belt, employee got hand caught between chain hoist and motor. Resulting in a finger laceration to the left pinky.

Moving the head on the drill up & down for mechanic to work on and the steel hammer came back and pinned EE's left elbow between it and the drill.

prepping to move a dragline, attached a hook to the cable on the back and when pulling started, hook broke from cable and employee fell onto right shoulder and elbow

While using bearing press to press master link into a chain, chain shot out of press and struck right hand

Drill bit blocked up, Employee raised tower and separated steel to remove all pressure to dig out air holes. Drill steel still had pressure and blew air and debris into Employee's eyes and face. He did not wear his safety glasses.

while accessing dozer employee fell from top step of ladder onto dozer track

Operating excavator in hard rock conditions, machine tilted and dropped back onto tracks.

2 employees using crane to hoist drill steel onto flat bed truck. Employee guiding drill steel got hand/wrist caught between steel & bed of truck.

Employee was welding pin back in place on left side of bucket and a hot spark went into left ear.

Using steam Jenny to wash parts sprayed right foot.

Drilling test hole @ 95' in coal bed. Drill bit got stuck & ignited coal causing Co to escape up drill hole. Employee felt ill & was taken to local hospital.

Welder without on stangless with 7018 rod.

While cutting/burnig, gas collected under EE's coat and ignited.

While ee was loosening nut on feeder gear box, nut free wheeled cutting finger on bolt that was sticking out.

Working on the heavy media prewet screen. 6x6 beams were cracked in half. Screen sees a lot of water, so it was rusty. Took the screen off deck of prewet to be grinded. Was wearing safey glasses and hard had with light attached and also had another light there. Had dust rag, steel could have been on rag when he wiped face. Did not get medical treatment until 8/17/09.

EE was using dye grinder, tool slipped and struck EE's thumb causing a laceration (required 8 stitches).

This employee was jack hammering ice & frozen material from a crusher when he was struck in the left eye with a piece of debris.

EE leaned up against previously cut hot plate and burned his right forearm. EE also has poison ivy on both arms, not sure where on the job he got that.

While cleaning mud accumulation out of discharge chute the air lance got stuck in the muddy material causing employee a strain of the left shoulder.

THIS EMP. & OTHERS WERE INSTALLING BOOM ON 285 DEMAG. GRINDING/WELDING/BURNING WAS TAKING PLACE - METAL SLIVER GOT INTO RT EYE.

While operating dozer, building a roadway, the operator went over large rocks & bounced violently in the cab of dozer causing a neck sprain. EE worked thru 3/12/04 & his first day of lost time was 3/15/04.

GRINDING BOLT FROM D9N DOZER - FB INTO LT EYE. WORKED 9/22 & 9/23 - OFF 9/24/03. SAFETY GLASSES WERE WORN DURING GRINDING.

WHILE USING AN AIR CHISEL, A FROZEN LUMP OF MATERIAL BROKE FREE WITH THE TOP OF THE RIGHT HAND GETTING PINCHED BETWEEN THE HANDLE OF THE AIR CHISEL AND IRON FRAME OF CONVEYER.

EE WAS CUTTING/BURNING APART OLD TANK WHEN HE WAS BURNED BY SPARKS.

THIS WELDER WAS HOLDING A PIECE OF STEEL WHILE ANOTHER WELDER WAS WELDING TO REPAIR SHOVEL BULLET AND WAS RETAILS ON LG. BOULDER. BOULDER MOVED BUCKET SLID AND CAUGHT 2 FINGERS BETWEEN BUCKET AND BOULDER.

USING CHIPPING HAMMER TO CHIP SLAG OFF & A PIECE OF SLAG (FOREIGN BODY) GOT IN LT. EYE.

EE WAS BURNING A BOLT HEAD OFF A SCREEN. HOT SLAG FELL INTO RT. EAR, BURNING EARDRUM.

EMPLOYEE WAS HEATING PIN IN DOZER TO REMOVE IT WHEN OIL RING EXPLODED AND SENT DIRT INTO BOTH EYES.

HURT HIS BACK WHILE RUNNING DOZER.

WHILE SQUEEZING ELECTRIC HOLDER, FINGER BENT DOWN, STAYING THERE, NOT ABLE TO MOVE.