Search the record

EE HAD BEEN WASHING GREASE FROM LARGE METAL SWING CASE COVER AND WAS WASHING HIS BOOTS BEFORE GOING TO BREAK. HE APPARENTLY PLACED THE END OF THE WAND TO CLOSE TO HIS RUBBER BOOTS AND THE COMB INATION OF PRESSURE AND HEAT TORE THRU THE BOOT ALLOWING HOT WATER AND STEAM TO BURN HIS RIGHT ANKLE.

EMPLOYEE WAS HOLDING SPUD WRENCH ON THE HEAD OF A BOLT THAT WAS HOLDING TWO PIPE FLANGES TOGETHER AS COWORKER WAS TIGHTENING OUT ON THE BOLT WITH AIR POWERED IMPACT WRENCH THE SPUD WRENCH SLIP PED OF THE BOLT AS IT WAS BEING TURNED BY IMPACT WRENCH CAUSING SPUD WRENCH TO FLIP BACK HITTING EMPLOYEE

EMPLOYEE WAS USING A 2 1/2" IMPACT WRENCH TO REMOVE BOLTS FROM HOIST CABLE ON DRAGLINE. SOCKET WAS ATTACHED TO IMPACT WRENCH WITH A PIECE OF THREADED ROD AND A NUT ON EACH END. SOCKET SLIPP ED OFF OF BOLT AND THE END OF THE THREADED ROD CUT EMPLOYEES ARM. LACERATION REQUIRED FOUR STITCHES. EMPLOYEE RETURNED TO THE SAME JOB WITHOUT ANY LOST TIME.

ANOTHER EE WAS USING A 3/4 IMPACT WRENCH. THE IMPACT MALFUNCTIONED AND SPUN THE NUT OFF CAUSING IT TO FLY OFF.

WORKING IN MILL AREA AND EYES BEGAN TO BURN AND WATER BY THE END OF SHIFT UNABLE TO WORK.

WORKING IN MILL AREA EYES BEGAN TO BURN AND WATER.

WORKING IN MILL-FLOTATION AREA EYES BEGAN TO BURN AND WATER.

WORKING IN MILL AREA- EYES BEGAN TO BURN AND WATER.

WHEN COMING OUT OF THE HOLE AND BREAKING DRILL PIPE LOOSE, CABLE BROKE ON TONGLINE, HITTING HIM IN UPPER CHEST AND KNOCKING HIM DOWN.

USING IMPACT WRENCH, SAND BLEW IN FACE.

CUTTING METAL OVER HEAD PIECE OF SLAG FELL INTO LEFT EYE.

CUTTING DUMP CABLE.HOT CABLE CAME BACK AND STRUCK LEFT ARM BURNING IT.

BAGGING PRODUCT FAN BLEW MATERIAL OFF TABLE IN EYE

WIND BLOWING EMPLOYEE DOING VERTICAL CUT WITH TORCH LEFT HAND SLIPPED & TORCH CAUGHT IN COAT SLEEVE

HE WAS CLEANING PUGMILL WITH AN AIR GUN. SOMETHING GOT CAUGHT IN HIS EYE.

RUNNING A DOZER ON ORE PILE DOOR OPEN WIND BLOWING ORE BLEW IN TO EYES CORNEAL ABRASIONS BILATERALLY

EMPL WAS GRINDING WELD JOINT WITH 9" GRINDER. GRINDER BLADE CAUGHT CAUSING GRINDER TO KICK BACK AT HIM. GUARD ON BLADE STRUCK HIM ON CHIN & NEC K AREA.

FELT SOMETHING IN RT EYE 5/14ON THE WAY HOME FROM WORK HAD BEEN WORKING ON A PUMP USING AN IMPACT WRENCH

ROLLING AN 18 INCH PIPE ON ROLLER WELDING PULLED MUSCLES IN LOWER BACK

PREPARING TO LEAVE WORK SOMETHING IN EYE, USING IMPACT WRENCH POSS METAL IN HAIR FELL IN EYE

IN MINE PIT WELDING ON PIPELINE. WHILE IN SQUATTING POSITION A PIECE OF WELDING SLAG FELL AND BURNED THROUGH PANTS.

AT THE MILL-EMPLOYEE STATED HE WAS CUTTING WITH A TORCH AND HOT SLAG DROPPED INTO HIS SHOE.

AT BUCKETWHEEL PATIENT STATES WHILE MOVING A MODULE UNIT AND STANDING APPROX. 20 FT FROM A BACKHOE A STEEL ROLLER WHEEL SHATTERED STRIKING RIGHT MEDICAL FOREARM.

STARTING IMPELLER ON PUMP SHIFT.USING BELT PULLEY TO TURN SHAFT.CAUGHT LEFT RING FINGER BETWEEN PULLEY AND BELT.

HH & CO-WORKER WERE USING HYDRAULIC COUPLING PULLER POWERED BY AN ELECTRICALLY DRIVEN PUMP. WHILE PRESSURED UP, A FITTING FAILED AND STRUCK HIS LEFT FOREARM.

EMPL WAS USING AIR LANCE IN PREHEATING COMPARTMENT. WHILE BLOWING OUT HOLE HOT ROCK FELL DOWN RIGHT SLEEVE.

OUTSIDE FAB SHOP-WORKING ON A 72 YARD BUCKET, A CONTRACTOR WAS OVERHEAD AND BEHIND HIM CARBON ARCHING-A PIECE OF HOT DIRT BLEW BACK AND HIT THIS EMPLOYEE'S NECK.

CUTTING CABLE WITH A WELDING MACHINE HOT SLAG FLEW ONTO LEFT WRIST.

REACHING ABOVE MANWAY TO RETRIEVE FLASHLIGHT STEAM & WATER FROM WATER LANCE STRUCK LEFT WRIST.

CLEANING OUT #1 CYCLONE ON #2 CALCINER USING AN AIRLANCE. HOT ROCK AND STEAM GOT INTO THE EMPLOYEE'S GLOVE WHILE HIS ARM WAS STICKING INSIDE THE DUCT ON THE #1 HOT CYCLONE.

EMPL HOLDING PIECE OF PLATE TO BE TACKED UP.WHEN INITIAL ARC WAS MADE BALL OF SLAG ROLLED OFF AND HIT EMPL ON LEFT SIDE OF HIS NECK.

WORKING ON 8200 DRAGLINE WELDING BRACKETS FOR LIGHT FIXTURES. HOT SLAG FELL AND HIT LEFT ARM. THE SLAG BURNT THROUGH THE CLOTHING AND BURNED THE LEFT INNER FOREARM.

HOLDING PC OR IRON FORM WELDER HOT SLAG FELL INSIDE HIS BOOT.

CUT A METAL PLATE OFF A TRUCK BODY & SET IT DOWN IN THE BED OF THE TRUCK THE PLATE THEN FELL OVER ON THE EMPLOYEES RIGHT FOOT

SITTING INSIDE A TEREX TRUCK,A BACKHOE HIT THE SIDE OF THE TRUCK CAUSING JARRING AND SHAKING OF THE TRUCK.

EMPLOYEE USING A FLEX DISC PAD - CLEANING A PIPE FLANGE - PAD CAUGT INSIDE PIPE AND GLANCED BACK ON TO ARM.

REMOVING SNAP RINGS FROM EQUALIZER BAR ON DOZER,FLAME FROM TORCH HIT LEFT WRIST.

EMPLOYEE WAS CUTTING TAG MATERIAL WHEN SHE PUT HER THUMB TO CLOSE TO EDGE OF CUTTER AND CUT THE END OF HER LEFT THUMB.

SLAG FELL WHILE AIR ARCING ON CUTTER HEAD.

CUTTING WITH TORCH,HOT SLAG FELL IN BOOT.STANDING IN MUD,PANTS TUCKED IN BOOTS.

USING SIDE GRINDER TO GRIND END OF PIPE,PIPE ROLLED ONTO ARM.

USING TORCH IN PIPE BALL AND GOT TOO HOT.

EMPL LEAVING PROPERTY FOR DINNER BREAK IN PICKUP TRUCK.SAND BLEW IN WINDOW AND INTO HIS LEFT EYTE.

HE WAS RUNNING A WIRE FEED WELDER. WELDER WAS TURNED UP TO A FEED SPEED OF 8 WITH HIGH AMPERAGE TO ACCOMODATE HIGH FEED SPEED. HE WAS FLASHBURNED DUE TO THE HIGH ULTRAVIOLET BEING RADIATED BY THE ARC.

USING AIR LANCE,#3 CALCINER HOT WIND BOX,HOT ROCK SPRAYED ON RIGHT ARM.2ND DEG.

EMPL ARC BURNING BRACKETS ON SWITCHES.CORNER LENSE OF FACE SHIELD CHIPPED OFF.AN ARC LITE MUST HAVE GOTTEN THROUGH AND BURNT LEFT EYE.

EMPL WAS WELDING BRACKETS ON SPREADER BALLAS BOOM AND A PIECE OF SLAG STRUCK HIM IN THE R EYE

CUTTING A PLATE3SLAG FELL ON PANTS LEG AND BURNT THRU TO LEG

PIECE OF METAL 8PRANG BACK AND HIT ELBOW.

WHILE TURNING P6G MILL OVER BY HAND GOT FINGER CUAGHT BETWEEN V-BELT AND PULLEY