Search the record

Reaching up to remove a tail chain from a stone when felt pain between shoulder blades which later radiated to chest

Twisting to the left.

Leaning forward trimming curbing and hurt lower back

Stepped on Wooden blocking used for Granite and twisted EE's ankle

Pinned leg between Stone and frame on Splitter.

Worker was placing a wood block under a stone and slipped on the ice and injured EE's hip

stood up after striking Wedges with a 12 lb hammer and felt back pain

Employee ran his hand across a piece of steel and felt something go into his index finger on his right hand.

Mounting a steel collar to a pole, collar slipped and caught his index finger on his right hand.

Employee using hand tool, piece of steel broke off and projected into left arm hitting main artery.

While placing a drive shaft into the bucket of a loader his gloved hand got caught on it causing his finger to become pinched when he put it down.

Worker slipped on some ice when getting out of his vehicle and landed on his shoulder. Got up and brushed off and went to work. No accident report was filled out and no lost time for the injury. Throughout the year his shoulder was giving him trouble and was traced back to the fall he had in December. He held off Surgery until December 28 2015. No lost time until now.

granite slab moved before employee was able to set into metal frame, crushed fingers between slabs

Piece of steel chipped off hammer employee was using on granite slabs, hit in chest (left side). X-rays not clear at first if foreign object in body, reread and recommending removal of foreign object.

EE ONSITE TO DUMP EXCAVATION MATERIAL. DUMPED LOAD THEN HAD TRACTION PROBS WHEN MOVING OUT. GOT OUT OF TRUCK TO SHOVEL SAND UNDER REAR TIRES THEN PUT SHOVEL BACK. WHEN TRUCK HADN'T MOVED YET, SWENSON FORKLIFT OPER. CHECKED ON HIM AND FOUND HIM OUTSIDE HIS TRUCK, COLLAPSED ON GROUND & UNRESPONSIVE. THAT OPER.IMMEDIATELY BEGAN CPR AND AN AMBULANCE WAS DISPATCHED-ARRIVED AT 1:18PM.

Carrying grout to dump bucket, grout broke and hit inside left knee.

readjusting timbers between blocks

Employee standing on uneven slabs to drill.

Curb shed employee had a piece of steel sliver enter into abdominal wall.

While jointing granite with hand tool, piece of metal chipped off from hand tool and entered employee's right leg

employee cutting a piece of plastic pipe with a utility knife, knife slipped and cut side of palm

While jointing the stone, hand tool chipped off metal & metal piece went into left leg.

Tail hole had a blow out, causing piece of granite to fly off, striking emp causing him to fall over, twisting ankle in process

employee picking up granite blocks, thumb squashed between two pieces

Carrying granite-scraped arm

Using a hand tool to trim granite, piece of steel went into leg.

Setting rails, backed up and fell over

Pinched finger between two pieces of curbing on conveyors.

Employee was lifting a piece of granite from the floor, stood, twisted to throw it into the grout box and felt something in his lower back.

Employee was pushing a piece of curb on the rollers when the end broke on a seam and hit his left upper leg.

Employee was pushing granite curb on the conveyor when a piece broke and it tipped back, pinching his fingers

Employee was working on the double head diamond saw. A piece of curb tipped off the banker onto the back of his leg.

Employee was changing the direction of the diamond wire saw, which was stuck in the stone. He was pulling on it w/a rope, which separated and employee fell backwards.

Employee was lifting curb with a bar - that had tipped over during the finishing process. (NOTE: LOST TIME BEGAN 8/27/09)

Employee was cutting curb using a steel hand chisel. A piece of steel broke off and went into his left knee.

Employee was driving a truck or a loader all day - steering all day.

Employee was cutting a block with it tipped and he fell and hit the granite.

Employee was reaching for something and his hand was caught in part of the machinery.

Employee was drilling granite. The bit broke and the drill moved and the remaining piece of drillbit went into his foot, just behind the steel toe cap.

A block was being lifted from the quarry. The chain tightened and a small piece of stone (corner) broke off and flew over and hit his arm.

Employee was lifting a piece of curbing from the curb line and felt a "twinge". (Employee worked full time through 7/11/08 and was operated on 7/14/08).

Employee was pushing curb on the roller/conveyor line, when one piece tipped over and fell on his finger.

Employee was leaning his hip against a piece of curb he was cutting, when it broke and he was pushed backwards and felt pain in his lower back/right leg.

Employee was holding the bullset when the granite broke and he moved his hand back, alongside the top edge of the granite curb. REQUIRED STITCHES.

Employee was cutting curb using a hand set. A piece of metal from the hand set flew off when he hit the granite. It lodged in his stomach area.

Employee was holding a hand "bull set" and another employee was hitting it w/a sledge hammer. A piece of granite broke off the curbing and a chip hit the top of his right hand.

Between 8/13/07 and 8/20/07, employee was doing a task (burning slabs) where he had to be a little "bent over" all day. Back symptoms got progressively worse. (NOTE: worked until 8/31/07 - lost time started 9/4/07).

Employee was using two wrenches - pulling each one - and felt something "let go" in his left chest/shoulder area.

Employee was walking in the Curb Shed towards his saw when he stepped on a piece of granite on the floor.

Employee was standing on drilling platform, moving his drill - his foot slipped and he "caught" himself with his right hand.