Search the record

Repetitive Movement operating equipment (loader). Accumulative trauma over time, 37 years as loader operator. No lost time until surgery.

Trying to thaw door on loader and water dripped down where he was standing on ice and he slipped and fell.

End dump driver was backing under pit loader, pit loader said his bucket dropped, hitting bed of truck and causing haul truck to come off ground. When pit loader raised bucket up, haul truck came down, causing it to jump forward causing employee's neck to move suddenly. Haul truck driver was wearing seat belt.

Employee was walking and supervisor drove next to him in pickup. The mirror hit employee causing in turn for the employee to hit the bed of the truck.

Shoveling rock and strained back.

Walking around the plant to start servicing, he stepped on rock on ground and twisted ankle.

While driving, He said the airride seat lost air pressure, and he hit a bump in road and jarred his back.

While doing maintenance, he slipped and fell and bent thumb back.

Stepped off ladder and twisted ankle.

Sprain or strain of back while lifting railroad ties. **Report received in office on 9/27/06. Unaware of injury until report was received in the main office.

Working on equipment, pry bar hit thumb.

While hammering off bearing, steel sliver punctured hand & lodged in his left hand, index finger joint.

Using a wedge to move rock from jaw of crusher, wedge and rock gave way and employee fell against the safety railing.

Repetitive movement of operating equipment, accumulative trauma over time. No lost time until 7-05-06 when he had surgery.

EE was walking across an elevated steel mesh walkway to a control house, when he slipped and fell on the walkway. It was snowing and sleeting at the time. The mid-rail and hand-rail prevented the EE from falling to the ground.

Fixing a V-16. Pushing a pipe wrench to dislodge a belt, Belt loosened and moved, placing his hand between a piece of metal and the wrench handle.

Stepped off ladder to ground while doing maintenance.

WHILE PERFORMING MAINTENANCE ON EQUIPMENT, HE SLIPPED AND FELL, SCRAPING HIS BACK AGAINST THE EQUIPMENT.

PICKING UP TOOLS OFF THE GROUND, SET 2 1/2 LB HAMMER ON #1 SCREEN. HAMMER FELL OFF SCREEN BOUNCED OFF THE CAT WALK AND STRUCK HIM ON THE RIGHT SHOULDER BLADE

CLEANING UP JUNK IRON PILES, LIFTING JUNK IRON HE SPRAINED OR STRAINED HIS BACK.

Rolling belts on V-16 and got his finger between the belt and sheave.

While using pipe wrench to change v-belt on screen, wrench slipped, catching hand between wrench and structural iron.

Putting v-belts on v-16 pulleys and rolled fingers into pulley and v-belts and cut and smashed fingers.

Cleaning his window on drill, tripped on tracks, and hit his right elbow on tracks.

EE HAD A WRENCH ON A BOLT, TIGHTENING BOLT, AS HE RAISED THE WRENCH, MUSCLE WAS PULLED IN HIS BACK.

CLEANING WINDSHIELD OF HAUL TRUCK, HOLDING ON WITH ONE HAND AND HAD BOTH FEET PLACED WHEN HE LEANED OVER AND FOOT SLIPPED ON THE TRUCK LADDER AND AS HE STARTED TO FALL, HIS LEG GOT CAUGHT IN F ROM STEPS ON THE TRUCK, TWISTING HIS KNEE.

EMPLOYEE WAS DOING MAINTENANCE ON A CONVEYER WHEN A 1 1/2 INCH SQUARE TUBING FELL AND HIT EE ABOVE THE RIGHT EYE.

EMPLOYEE WAS STEPPING OFF OF LADDER AND MISSED LAST STEP FALLING TO THE GROUND.

WHILE BANDING HOSE, HIS ARM SLIPPED AND BAND CUT HIS ARM.

JERKING ON A WRENCH TO LOOSEN A BOLT.

EE HAD DRIVEN 1 COMPANY VEHICLE TO THE AREA WHERE OTHER EE'S WERE REPAIRING A GEAR BOX. THE EE EXITED THE CO. VEHICLE & WAS STANDING BETWEEN 2 COMP. VEHICLES. ONE OF THE VEHICLES BEGAN TO ROLL FORWARD A FEW FEET AND THE EE WHO HAD TRIED TO STOP THE COMP. VEHICLE BECAME LODGED BETWEEN THE 2 VEHICLES.

SPRAIN OR STRAIN. PUSHING SCREEN WITH TOP OF HEAD.

JUMPED OFF END DUMP AND LANDED WRONG. MEDICAL RECORDS RECEIVED 8/20/02, PRESCRIPTION RECEIVED FOR INJURY.

WHEN TIGHTENING BOLTS WITH WRENCH, SHARP PAIN IN RIGHT SHOULDER. 07/30/02-NO MEDICAL TREATMENT REQUESTED-NO LOST TIME. 08/07/02-MEDICAL TREATMENT REQUESTED.

CLEANING FEEDER BY REMOVING ROCKS BY HAND.

NUMBNESS & TINGLING EXPERIENCE WHILE OPERATING LAODER. (REPORT RECEIVED IN OFFICE 7/12/02. UNAWARE OF INJURY UNTIL REPORT WAS RECEIVED)

GRINDING ON CRUSHER, IT WAS WINDY; METAL SHAVING GOT INTO EYE. HE WAS WEARING SAFETY GLASSES.

CUT THUMB WHILE WORKING ON SKID LOADER.

PRYING ON BEARING WITH CAT BAR, CAT BAR SLIPPED, A SLIVER OF METAL WENT INTO THE EYE.

IN AREA WHERE ANOTHER PERSON WAS WELDING, RECEIVED INDIRECT REFLECTION OF FLASH FROM WELDER.

PULLING CHAIN WHICH WAS ATTACHED TO A CONVEYER BELT.

PUTTING GRATES IN HAMMERMILL AND SMASHED RIGHT HAND ON GRATE.

MAINTENANCE ON BOB CAT; A PART FELL, HITTING FINGER.

STRAINED SHOULDER WHILE LIFTING BELLY PAN ON 988B LOADER.

DRIVING END DUMP ON HAUL ROAD, HIT BUMP IN ROAD.

TOO MUCH ROCK IN BUCKET, SHOOK BUCKET TO REMOVE EXCESS ROCK; 1 8"-10" ROCK BOUNCED OUT OF BUCKET AND HIT AND CRACKED WINDSHIELD. MINUTE PARTICLES OF GLASS WENT INTO HIS EYE.

LIFTING BELT GUARD OFF OF #2 SCREEN & HIT ELBOW ON CORNER OF BELT GUARD

PULLING BOXES OFF SHELF, BOTTOM BOX FELL OUT AND HIT HIS FOOT.

HE GOT OUT OF POWDER TRUCK TO PUT FUEL INTO IT. WHILE WALKING AROUNG THE BACK OF THE VEHICLE, HESLID ON SNOW AND FELL, TWISTING HIS LEG BEHIND HIM.