Search the record

While employee was changing screens on the washplant, he reached to his left for a bucket of tools.

Sprained right knee stepping from work skiff to floating conveyor

Employee states he had been lifting wooden crane pads and back was strained

Employee was putting on rubber and metal plates on wash plant while standing on the main feeder belt and eco block. Foot slipped off the main frame and eco block and employee fell backward onto the Grizzly motor frame. Employee did not go to Dr/Hosp until 5/31/14 with soreness. No broken bones, just bruised

Employee states he stepped in a hole on the surface he was working on. Employee states he fell and reached out with right hand and put strain on his shoulder. Employee DID NOT seek medical attention until on/about 8/19/13

Employee was setting up crushing plant. Employee was pulling heavy electrical wire over head assembly. Strained right shoulder and left leg.

Victim,entered the property passing the No Trepasssing Signs with four other individuals. Our understanding is they began to swim in the pond and he drowned before reaching the shoreline. The incident occurred after the end of our shift which ended at 4:30 pm and no miners where on site at the time. Victim was NOT a miner or an EMPLOYEE of the mine.

Injured on 3/30/12 loading material into loader bucket and foot was smashed under bucket. The emp. was evaluated @ ER and no med. treatment was administered and the injury was limited to bruising only. On 5/17/12 the emp. returned to the Dr. and a walking cast was applied. We feel this now meets the definition of med. treatment, therefore we are submitting this report as required.

Employee was cleaning under the conveyor. A rock rolled off the belt and struck him on the hard hat.

Employee was under the pontoon, on his back, in a ditch, tightening dredge bolts to 200 ft. lbs. torque. Employee has right shoulder issues. THE EMPLOYEE DID NOT SEEK MEDICAL ATTENTION UNTIL 1/10/12 WHEN HE SAW A CHIROPRACTOR.

3 employees were installing a roller on a conveyor. One employee lost his grip and the injured employee tried to maintain his grip, resulting in pinching of finger between the roller and conveyor frame.

Stepped off the lowboy, foot landed on hose, rolled right ankle.

Swinging a sledge hammer knocking rocks loose

Heavy Equipment Operator - Continuous use of hands (Carpel Tunnel).

Employee was replacing damaged conveyor. Employee made contact with metal conveyor that was energized.

Accident was NOT reported to Concrete Nor'West until 3/25/09. On approx. 2/25/09 EE was carrying bags of cement up a hill. On 3/20/09 he was having muscle spasms and saw a chiropractor. He saw the Chiropractor again on 3/24/09 and the doctor indicated he has compression fracture. EE informed us on 3/25/09 that he injured himself in February 2009.

Injury reported to Safety Mgr. on or around 9/5/08 that his shoulder was sore. He did not receive treatment at that time. No single incident was to blame. He didn't start receiving treatment until January 2009. He notified us on 1/27/09 that he was receiving treatment.

Worker was pulling on a bar when the bar broke. Sudden weight shift caused worker to run back of hand across steel guard.

Installing an I-beam in the shaker deck. Had to do very heavy lifting and standing in an awkward position. Strained abdomen. This incident did not become reportable until his first doctors visit on 3/24/08.

Operating forklift, wheel went in a rut and steering knob on steering wheel spun around real fast and hit left thumb, breaking left thumb.

Employee was pulling ladder from the rear of the service truck and felt a sharp pain in lower back. Employee first sought medical attention on May 1, 2007.

Stepping down from loader. Missed a step. Fell to ground hitting head on step. Laceration to head with stitches.

Saw doctor on 6/12/06 with pain to hip area. Bacterial infection set in at rt knee, rt flank & rt hip. On 6/23/06 realized he had scraped his rt knee on a concrete block, which was the source of the bacterial infection. Off work for approx. 3-4 weeks.

Employee was replacing a safety guard in the tunnel. Employee was lifting the safety guard and turning. Employee felt back go out.

Employee was fueling his dump truck at our Boulder Hill pit in Oak Harbor, WA. While fueling, the employee was stung by a bee and passed out.

Injured employee is our full time heavy equipment operator at our Getchell Pit. Constant movement side to side created mid-back pain. He did not seek medical attention until 7/11/05.

Lost balance while crouched down - Kneeled on wrench. The incident was a first-aid only when it happened. It did not become reportable until 5-31-05 when employee went to the doctor to have knee drained.

Employee was clearing sand off the side boards of his dump truck with back of shovel. The wind blew and sand flew into employee's right eye.

Incident occurred on 6/5/04 and treated as First Aid only until doctor visit on 6/21/04. Left brake caliper was partially disassembled and on mounting pedestal. He bent down to pick up a fallen Allen wrench and caliper fall off and hit top of knee.

Employee got out of loader, walked to cone crusher, stepped on a rock and rolled ankle.

WHILE HOLDING A 3 FOOT LENGTH OF STEEL PLATING IN PLACE TO WELD, IT SLIPPED, STRIKING LEFT EAR.

HE WAS HOLDING THE BECKET BY IT'S EYES AND WAS TAPPING THE SHORT LENGTH OF PROTRUDING CABLE AGAINST THE DECK USING THE WEIGHT OF THE BECKET TO FORCE THE CABLE THROUGH. CABLE RELEASED AND TRAP PED 2 FINGERS.

CUTTING COVER OFF S.O. CORD. KNIFE SLIPPED, CUTTING FINGER.

DUMPING MATERIAL (WET) TOO FAST, REAR LOADER TIRES CAME OFF GROUND, HIT CHEST ON STEERING WHEEL.

WORKING WITH 3 OTHER PERSON ON REPAIR OF TOP SHAKER DECK. SHOULD HAVE HAD 2 PERSONS ON BOTH SIDES OF SHAKER TO BALANCE IT OUT. TIGHTENING BEARING PLATE TO SHAKER BOX, WHEN THE SHAFT TURNED AND COUNTER WEIGHT PINCHED TIP OF FINGER.

SLIPPED ON LOADER STEP WHEN GETTING ON LOADER.

WHILE WASHING DOWN A CONCRETE SLAB, EE STEPPED BACKWARDS OFF SLAB AND LANDED AWKWARDLY ON SURROUNDING GRADE.

LOADER PASSED OVER UNEVEN GROUND CAUSING IT TO LURCH SIDE TO SIDE.

EE WAS ON LIGHT DUTY AND WAS HELPING WITH GENERAL MAINTENANCE ON THE DREDGE.

WAS PULLING WASH DOWN HOSE ACROSS TOP OF EMPTY TUNNEL. STEPPED ON SOME ROCKS WHILE PULLING & TURNED KNEE, TWISTED & POPPED OUT.

CLEANING OFF ROCKS ON TOP OF A GRIZZLY ON TOP OF A FEEDER ABOARD A DREDGE. HITTING A ROCK WITH A SLEDGE HAMMER. ROCK BROKE & HIT LEG.

CLIMBING DOWN FROM CAB, LOST FOOTING, CAUGHT SELF WITH RIGHT ARM.

SLIPPED OFF CRUSHED ROCK PILE WITH LOADER HITTING LEVEL GROUND HARD.

CLIMBING LADDER UP TO WINCH HOUSE, STRUCK LEFT KEE ON NEXT STEP UP.

STEPPED ON ROUND ROCK, ANKLE TURNED, KNEE BUCKLED, LEG FOLDED UNDER HIM.

EE WAS USING A PRYBAR TO DISLODGE CHUTE IN CRUSHER FEEDER.

EE WAS CUTTING A PLATE. PIECE FELL OFF OF PLATE, AT THE CUT, AND SWUNG WRONG WAY. PIECE FELL ON SHIN AND REQUIRED STITCHES.

ARM QUIT WORKING WHILE HE WAS TRYING TO CHANGE GEARS IN A 980 CAT FRONT LOADER.

CHANGING BRAKE ROTOR ON DREDGE, ROTOR SLIPPED OFF HUB AND PINCHED FINGER AGAINST OTHER HALF OF HUB ON MOTOR SHAFT.