Search the record

EE WAS STANDING ON THE FENDER OF THE BUNKER TRUCK ADDING POWER STEERING FLUID TO THE RESEVOIR HE LOST HIS FOOTING AND FELL BACKWARDS LANDING ON THE CEMENT BORDER OF THE CONTAINMENT SLAB.

EE WAS WORKING WITH ANOTHER EE INSTALLING A DRIVELINE IN THE 985 LOADER. HIS HAND BECAME CAUGHT BETWEEN DRIVELINE AND YOKE ON THE LOADER PINCHING AND LACERATING HIS FINGER.

EMPLOYEE WAS CLIMBING THE LADDER GOING UP TO THE #1 BELT FROM THE FEEDER ON THE PLANT. HE LOST HIS FOOTING AND SLIPPED CLIMBING THE LADDER.

EMPLOYEE WAS WORKING ON CONSTRUCITON OF CONVEYOR HE WAS HOLDING A PIECE OF IRON IN PLACE WHILE A WELDER WAS WELDING ON THE BACK SIDE AFTER THE WELDING WAS COMPLETED THE SLAG COOLED & POPPED IN TO EMPLOYEES EYE

EMPL WAS ASSISTING IN CHANGING OF CUTTING BLADES ON CAT D9L DOZER. HE WAS WORKING WITH ANOTHER EMPL LIFTING & REMOVING WORN BLADES.

EMPL RETURNING TO PLANT AFTER DELIVERING ROCK.THEN BED OF BUNKER TRUCK WAS LEFT IN A RAISED POSITION SO WHEN TRUCK PASSED UNDER THE OVERPASS THE BED COLLIDED WITH OVERPASS AND SEPARATED FROM C AB.

EE WAS WORKING ON 988B LOADER. HE WAS CLIMBING DOWN FROM LOADER AND SLIPPED A FELL.

EMPLOYEE WAS CHANGING THE SCREENS ON THE SHAKER. EMPLOYEE WAS PULLING A SCREEN UP ON TOP OF THE SHAKER AND FELT A MUSCLE PULL IN HIS GROIN.

EMPL WAS EXPOSED TO EXHAUST FUMES WHILE SWEEPING AROUND SCALE HOUSE USING STREET SWEEPER.

EMPL WAS STRIKING REVOLVING SCRRN WITH BOARD TO CLEAN SCREEN. BOARD BOUNCED OFF SCREEN & STRUCK EMPL IN THIGH.

EMPL CUTTING MATERIAL OFF EQUIP.LIT TORCH,TORCH HOSE EXPLODED AND BROKE AWAY FROM TORCH END BURNING HIS FOREARM.

EMPL LIFTING 7'SECTION OF WATER PIPE ONTO BACK OF TRUCK.

EMPLOYEE WAS HOLDING A PLATE ACROSS THE POLY SCREEN WHILE ANOTHER EMPLOYEE WAS WELDING ON THE CHUTE THAT WAS BEING INSTALLED OVER THE SHAKER A PIECE OF DIRT FLEW INTO HIS EYE

EMPLOYEE WAS INSTALLING PINS IN THE TEETH OF THE BUCKET OF THE 966 LOADER. A PIECE OF METAL FLEW OFF OF THE PIN AND PENETRATED THROUGH THE CLOTHING CUTTING HIS SIDE. INJURY REPORTED 4-18-90 BU Y TREATMENT REFUSED. TREATMENT NECESSARY ON 4-27-90.

THREE MAN CREW WAS ATTEMTPING TO CLEAR A CONE CRUSHER PLUG-UP. THE HEAD BOX HAS TO BE RIASED TO ALLOW ACCESS TO CLEAR THE CRUSHER. THE HEAD BOX WAS LIFTED BY A BOOM (HYDRAULIC) TRUCK AND BRACI NG WAS PLACED UNDE THE HEAD BOX. WHEN THE HEAD BOX WAS LOWERED THE BRACING SLIPPED AND THE INDIVIDUALS LEFT RING FINGER WAS PINCHED BETWEEN THE HEAD BOX AND THE I-BEAM.

EE WAS STANDING IN FRONT OF V2 SHAKER HANDING A SCREEN UP TO ANOTHER EE HE PULLED A MUSCLE IN HIS BACK WHEN HE LIFTED THE SCREEN.

EMPLOYEE WAS REPLACING THE SHANK ON THE LOADER BUCKET. HE WAS WELDING AND RECEIVED SIDE REFLECTIVE FLASH BURNS TO HIS EYES.

EMPLOYEE WAS CHANGING SCREENS ON THE PLANT.

EMPLOYEE WAS REPAIRING THE SWITCH ON THE DRIP PAN AT THE BIRDSEYE BUNKER. HE CLIMBED UP TO DISCONNECT THE AIR HOSE AND HIS LEG WAS HIT BY THE DRIP PAN.

EMPL WAS PULLING SAMPLES OF MATERIAL. HE PULLED SAMPLE COLLECTION PAN FROM UNDER WEIGH HOPPER. WHEN HE PLACED MATERIAL IN SAMPLE BUCKET HE FELT SNAP IN LEFT SHOULDER. DIAGNOSIS OF INJURY DID N OT TAKE PLACE UNTIL 2/14/90 & SURGERY WAS RECOMMENDED.

EMPLOYEE WAS USING A CHAIN COME-A-LONG TO PICK UP STEEL PLATE. THE HOOK THAT WAS WELDED ONTO THE CHUTE CAME OFF AND THE COME-A-LONG HIT HIM IN THE LEFT SHOULDER. *EMPLOYEE RETURNED TO WORK 1 2-17-89 BUT OFF AGAIN 12-20-89.

EMPLOYEE WAS INSTALLING THE TOGGLE SPRING. THE SPRING HAD TO BE LOOSENED AND HE HIT IT WITH A HAMMER. THE FORCE OF THE SPRING CAUSED THE HAMMER TO FLY BACK AND HIT HIM BETWEEN THE EYES.

EMPL DRIVING BACK OF WEDGE BOLT WITH HAMMER TO KNOCK OUT WEDGE.EMPL SMASHED INDEX FINGER WITH HAMMER.

EMPLOYEE WAS WELDING INSIDE THE FEEDER. IN THE PROCESS OF THE WELDING PROJECT, THE EMPLOYEE WAS CLIMBING IN AND OUT OF THE FEEDER AND WORKING ON HIS KNEES. EMPLOYEE CONTINUED WORKING ON PROJE CT BUT THE DISCOMFORT IN THE KNEES REQUIRED HE SEE A DOCTOR BUT THE DISCOMFORT IN THE KNEES EMPLOYEE REQUIRED WORKING ON PROJECT BUT THE DISCOMFORT IN THE KNEES REQUIRED HE SEE A DOCTOR ON 10-

EMPLOYEE WAS UNHOOKING THE TOW CHAIN FROM THE WELDING MAINTENANCE TRUCK. HE LEFT THE ENGINE IDLING & CAUGHT HIS HAND IN THE FAN BLADE WHEN HE REACHED TO REMOVE CHAIN.

EMPLOYEE WAS CLEANING UNDER THE DRY PLANT. A ROCK FELL FROM THE CONVEYOR BELT ABOVE THE EMPLOYEE HITTING HIM IN THE NECK.

EMPLOYEE WAS CLEANING THE WINDSHIELD ON THE WATER TRUCK WHEN HE SLIPPED AND FELL.

EMPL REMOVING HOLD-DOWN NUTS FROM TELESMITH.MULTIPLYER BROKE JAMMING HAND AND SHOULDER.INJURY DINT REQ TREATMENT UNTIL 2-27-89.

EMPLOYEE WAS CLEANING AREA UNDER THE PRIMAR FEEDER EMPLOYEE CAUGHT HIS FOOT & FELL APPROX.10FT TO THE LOWER PLATFORM

EMPLOYEE JUMPED 3-4' TO GROUND FROM THE PLANT AND INJURED HIS LEG.

EMPL WAS ASSISTING IN REPAIR OF FENDER OF R85 HAUL TRUCK. WHEN FENDER BROKE LOOSE & CUT THROUGH SHOE INJURYING TOE.

WAS OPERATIONG LOADER DIGGING WUARRY WALL SECTION DISLODGED FALLINT INTO BUCKET CAUSING LOADER TO DO AN INVERTED WHEELIE EMPLOYEE HIT HIS HEAD ON CANOPY STRIKING THE TOGGLE SWITCH

A ROCK FELL OFF OF CRUSHING DECK ONTO TOP OF ROLL CAGE OF BOBCAT CAUSING THE EMPLOYEE TO LUNGE FROWARD HITTING HIS HEAD ON ONE OF THE CONTROL LEVERS.

EMPLOYEE STOOPED DOWN TO MOVE A ROCK AND STRAINED HIS BACK.

SEE ATTCH: DRIVING LOADER TO PIT TO REMOVE CLAY OVERBURDEN PREVIOUSLY PUSHED TO FLOOR FROM TOP OF PIT BY TRACK DOZER.WHEN EMPL STARTED DESCENT INTO PIT LOADER ROADE TOE OF BERM FOR SEVERAL HUN DRED FEET THEN VEERED AT 45 DEG ANGLE OVER BERM OVER 50-60' AREA BETWEEN BERM AND PIT WALL THEN DROVE OFF EDGE OF PIT LANDING ON PIT FLOOR.ALTHOUGH LOADER WAS FOUND IN UPRIGHT POSITION CRUSHE

STRAINED SHOULDER WHILE DRIVING WATER TRUCK.

DISLODGING ROCK FROM REAR TIRE AND FRAME OF SCRAPER ROCK HIT EMPLOYEE,S EYEBROW.

INJURED WAS WELDING TRANSMISSIONN IN HOUSING OF CATERPILLAR - LOADER TRANSMISSION AT THE BOTTOM OF THE MACHINE. THE OIL HAS BEEN DRAINED FROM THE TRANSMISSION BUT THE WELDING TORCH CAUSED TH E RESIDUAL OIL TO OVERHEAT AND EXPLODE IN THE TRANSMISSION. FLAMES SHOT OUT OF THE DRAIN PLUG HOLE AND BURNED THE EMPLOYEE.

EMPLOYEE WAS SHOVELING MATERIAL FROM UNDER BELT SHOVEL CAME INTO CONTACT WITHCONVEYOR BELT CAUSING THE SHOVEL HANDLE TO HIT EMPLOYEE IN FACE LACERATING RIGHT EYEBROW.

EMPLOYEE WAS HOVELING MATERIAL FROM UNDER CONVEYOR BELT WITH HAND SHOVEL. STRAINED UPPER RIGHT ARM WHILE SHOVELING MATERIAL.

EMP. WAS WORKIN1 WITH CONVEYOR FRAME WHEN THE FRAME FELL AND THE EMP. SUFFERED A BROKEN TOE.

BENT OVER TO LI0T JACK STAND AND STRAINED LOWER BACK.

CUTTING A PIECE OF KEYSTOCK FOR TAPER LOCK WITH HACKSAW METAL SLIPPED FROM VICE GRIPS AND HACKSAW CUT THROUGH FINGER SEVERING TNEDON

EMPLOYEE WAS PRYING ROCKS OUT OF GRIZZLY WHEN A LARGE ROCK FELL AGAINST HAND. ACCIDENT WAS NOT REPORTED TO SUPERVISOR UNTIL 2-11-88 WHEN HANDBEGAN TO SWELL AND PAIN WORSENED. DIAGNOSED AS FRAC

EMPLOYEE AS PUL5ING TOGGLE SPRING BOLT OFF OF JAW CRUSHER WHILE DISASSEMBLING CRUSHER THE SPRING CAME OUT OF ITS SEAT & SMASHED FINGER BETWEEN SPRING & MAIN FRAME

WHILE THREADING3CONDUIT,EMPLOYEE'S CLOTHING CAUGHT ON DRIVE SHAFT OF THREADING MACHINE AND PULLED HIM INTO BOLTS ON SHAFT AS IT WAS TURNING.

EMPLOYEE SLIPPE8 WHILE WALKING DOWN STAIRS AT PAPLANT AND TWISTED ANKLE.

EMPLOYEE LIFTED3A 63.8 PIECE OF STEEL WITHOUT ASSISTANCE.

EMPLOYEE HURT H3S SHOULDER WHILE CRANKING A COME-A-LONG. ALTHOUGH EMPLOYEE EXPERENICED SORENESS, HE CHOOSE TO WORK IT OUT AND DID NOT SEEK MEDICAL ATTENTION UNTIL 11-11-87.

WALKING TOWARD 5UBE AREA IN PROCESS OF BEING SCRUBBED AND WASHED AND FELL ON FLOOR.