Mining Incidents

ROCKY POINT QUARRY Metal/Non-Metal

Raleigh, Pender Condado, NC  ·  Abandoned
ID de mina MSHA: 3101956

Seguir esta mina

Avísenme cuando se presente un nuevo incidente de la MSHA en ROCKY POINT QUARRY.

Muertes
0
Incidentes totales
8
Años en registro
2001–2010
Último incidente
Dec 2010
Historial de cumplimiento
Citaciones de MSHA desde 2000
74
citaciones
19
significativas y sustanciales
$22,310
multas propuestas
$21,474
pagado a la fecha
Fuente: datos de violaciones de MSHA, actualizados semanalmente.
Tasas de seguridad trimestrales
Citaciones por millón de horas trabajadas, según lo reportado a MSHA
Trimestre Horas trabajadas Citaciones S&S Por 1M hrs
2022 Q3 0 0 0
2022 Q2 0 0 0
2022 Q1 489 0 0 0.0
2021 Q4 1,420 0 0 0.0
2018 Q4 0 0 0
2018 Q3 4 0 0 0.0
2018 Q2 15 0 0 0.0
2018 Q1 284 0 0 0.0
Los trimestres con menos de 100,000 horas reportadas aparecen atenuados: muy pocas horas para una tasa estable.
No se registran muertes en esta mina.

Incidentes reportables

8 en archivo

2010 · 1 incidente

21 de diciembre de 2010 NC · Metal/No metálico Operador de grúa, Operador de equipo móvil (MEO), Operador de dragalina, Operador de bola de demolición, Aparejador MANEJO DE MATERIALES
Martin Marietta Materials Inc · Golpeado por... no clasificado en otra parte

Removing plow bolts form a loader bucket cutting edge for replacement. Other ee operated the impact wrench to remove nut and the bolt backed out and started to spin so victim place his hand on the bolt to hold it in place. Bolt spun and sharp edge of bolt cut through the glove and into left index finger causing laceration requiring 6 stitches to close. Medical only

2008 · 1 incidente

11 de enero de 2008 NC · Metal/No metálico Operador de grúa, Operador de equipo móvil (MEO), Operador de dragalina, Operador de bola de demolición, Aparejador MAQUINARIA
Martin Marietta Materials Inc · Golpeado por... no clasificado en otra parte

Laceration to left cheek area when air impact socket struck employee working on dragline. Employees were working under the Lima dragline removing nut from the vertical travel shaft pinion. When the air impact wrench was removed from the nut, the trigger was accidentally hit. The socket spun off and struck employee in the left cheek.

2007 · 2 incidentes

17 de abril de 2007 NC · Metal/No metálico Ensayador, Geólogo, Metalurgista, Ingeniero, Gerencia de ingeniería MANEJO DE MATERIALES
Martin Marietta Materials Inc · Golpeado contra un objeto fijo

Employee was getting into truck T-648 and did not bend over far enough (was wearing hard hat) causing him to hit top of hard hat on the inside of door opening. This caused his head to bend backwards very hard hurting his neck. His fingers, hands, and feet are numb and tingling. Also, his arms and legs feel weak.

7 de febrero de 2007 NC · Metal/No metálico Operario de banco, Cantero TRANSPORTE MOTORIZADO
Martin Marietta Materials Inc · Atrapado en, bajo o entre un objeto en movimiento y uno fijo

Employee was cleaning up in the surge tunnel when he heard a spring on the feeder rattling. He placed his hand on the springs to determine which one was loose and his finger slipped between the broken spring and the bracket where it was pinched through his glove. He sustained a laceration to his index finger which required 5 stitches.

2005 · 2 incidentes

9 de diciembre de 2005 NC · Metal/No metálico Operador de grúa, Operador de equipo móvil (MEO), Operador de dragalina, Operador de bola de demolición, Aparejador RESBALÓN O CAÍDA DE PERSONA
Martin Marietta Materials Inc · Caída sobre o contra objetos

EE was working in the engine room of the lima 2400 dragline when he slipped on the slick floor plates due to mud and fell striking his head ont he engine. He suffered a laceration to his forehead above the left eye which required 9 stitches. Medical only.

19 de agosto de 2005 NC · Metal/No metálico Operador de bulldozer, Operador universal, Operador de equipo pesado, Ingeniero operador MANEJO DE MATERIALES
Martin Marietta Materials Inc · Golpeado por... no clasificado en otra parte

EE CUT HIS FINGERS ON THE AIR CONDITIONER FAN. WHILE TRAMMING THE CAT 988F LOADER, ONE OF THE AIR COND VENTES FELL OUT OF THE OVERHEAD UNIT. HE WAS ATTEMPTING TO REINSTALL THE VENT WHEN THE MACHINE HIT A BUMP CAUSING HIS HAND TO GO INTO THE OPEN VENT HOLE ANC CONTACT THE BLOWER FAN LACERATING TWO FINGERS ON THE RIGHT HAND AND CAUSING A HAIRLINE FRACTURE OF THE MIDDLE FINGER

2003 · 1 incidente

5 de mayo de 2003 NC · Metal/No metálico Soldador (de taller) HERRAMIENTAS MANUALES (SIN MOTOR)
Martin Marietta Aggregates · Golpeado por... no clasificado en otra parte

STRUCK ON LEG BY A CHAIN HOIST. EE WAS PULLING A 5 TON COME-A-LONG FROM INSIDE OF ROCK BOX THATSETS OVER THE JAWCRUSHER. THE COME0-A-LONG WAS BEING USED TO LIFT CHECK PLATES OUT FOR EXCHANGE. WHEN LIFTING THE RACHET PART OF THE COME-A-LONG OUT & DRAGGING THE LIFT HOOK BLOCK UP WITH THE COMEALONG, CHAINS FOR REMOVAL FROM THE BOX, THE HOOK BLOCK REACHED THE TOP EDGE OF THE BOX & SWUN

2001 · 1 incidente

29 de junio de 2001 NC · Metal/No metálico Obrero, Herrero, Cuadrilla, Mensajero de repuestos, Peón, Recolector, Operario de mina RESBALÓN O CAÍDA DE PERSONA
Martin Marietta Aggregates · Caída a un nivel inferior, no clasificada en otra parte

WHILE CLIMBING PLANT STRUCTURE TO ACCESS CONVEYOR, SLIPPED AND FELL AND CUT LEG ON BOLT ON CONVEYOR. LACERATION REQUIRED STITCHES TO CALF OF LEFT LEG.