Buscar en el registro

Employee was opening a valve with sledgehammer in a congested work area, felt a "burning sensation" discomfort in left shoulder.

Was cleaning screen box and hit thumb with hammer

Employee was hammering overhead to break loose a knocker, felt a "pinch" in employee's back.

Tightening a stud on right side of pump, wrench slipped and injured worker struck top of tank with right elbow.

EE was swinging a 4 lb hammer and missed nut striking index finger on left hand causing fracture and laceration.

Employee states that he was beating on multiple press feed valves and repeatedly tried to seat valves as daily routine, pain in elbow started 6 months ago.

employee was draining a heater, hit knocker valve with hammer, right index finger was trapped between hammer and T-handle causing laceration and fracture of right index finger.

Cut right upper thigh with utility knife when cutting strap off bundle of hose.

employee was closing a valve with 8 lb hammer, finger was smashed finger between hammer and valve

Employee was closing a valve, pipe wrench pinched finger between valve and circulation line.

Employee pinched finger between railing and pipework. Per email from reporting party, EE was changing out the bag on the number 3 zimpro using a pipe wrench to hold bag up, while coworker, (new to job) started loosening the fitting. Injured EE's finger was caught between handrail and pipe wrench.

Employee was tightening valve packing, wrench slipped off nut and crushed finger between valve and wrench causing a tuft fracture 4th digit left hand.

Employee dropped 4 lb hammer on top of left foot causing pain.

Employee was trying to loosen a wing nut with a prybar, prybar slipped and hit finger causing bruise under nail. RED LINE CASE Case did not become recordable until 8/14/15 when prescription medication was given

RED LINE CASE BECAME RECORDABLE ON 6/17/15 CASE UNDER REVIEW employee was opening a valve and struck 5th digit right hand with sledgehammer, unsure how it happened, 1 week later presented with increased pain and swelling after weekend off, xray revealed tuft fracture

employee was swinging sledgehammer and came in contact with T handle on valve pinching finger causing fracture and laceration to index finger left hand

RED LINE CASE LATE REPORTING, UNSURE OF INCIDENT DATE AND TIME , WORKED FOR 1 MONTH BEFORE SEEKING MEDICAL ATTENTION states that while closing a liquor valve he missed the valve with the sledgehammer and felt pain in right shoulder

Red Line Case: Case became Medical Treatment on 5/13/15 employee was hammering and elbow hit the tank and felt pain in right elbow

RED LINE CASE: H&S Manager is a disputing work relatedness employee states was hitting on mud 13 valve liquor floor for about 10 minutes and in the process of hitting the valve he felt a pull in lower back

employee was closing door on screen box, tightening nuts, holding the wing nut with left hand, swung 4 lb hammer and struck left thumb

RED LINE CASE. Injury date was 3/9/15 did not become restricted until 3/13/2015. Closing blow off valve, was loosening up a valve with a 8 lb hammer, felt pain in right elbow.

employee was hitting a valve with 6lb sledgehammer in a confined area, the hammer spun around in his hand and struck him breaking front teeth

complained of back pain unresolved from December 2014

Employee was hammering to break a t handle loose, the handle struck his right index finger causing laceration

unplugging a shoot, swung hammer and pinched finger between lid and hammer causing contusion

was swinging 8lb sledgehammer doing 3 pump changes and felt discomfort in left shoulder during first valve change,

lower back pain was using a cheater bar and was pulling on the cheater bar and the bolt broke, felt back pain

Temporary leased employee was working under plant supervision when he smashed his left middle finger while using a pipe wrench. The injury resulted in a laceration that required stitches.

hitting a valve and the hammer slipped off the valve causing finger to contact the handle. small avulsion of skin on right index finger

Tightening packing on pump, ratchet gear slipped causing pain in right wrist

Was hammering on a shredder to get a part to fit, felt pain in shoulder

Employee was tapping a wedge under a steel plate resting on concrete at the R-10 Gantry area, while tapping the wedge the wedge shot out from under the steel plate striking the employee in the left shin. Employee received a puncture wound requiring 4 stitches and suffered a impact fracture to the bone require further doctor's visits.

Employee was opening valve with hammer and felt pop on right elbow.

hammering and closing valves , pushing and pulling and lifting

Red Line Case- Initial report was First Aid only and then came back one month later to report to medical. Employee hit finger with hammer.

In process of closing knife gate wheel valve for caustic return line to caustic tank in R50 using a wheel valve wrench when the wrench slipped and caught end of left pinky finger between valve wrench and top of R50 caustic tank on edge.

Dropped hammer on foot

Pulling a crow bar trying to open a latch on a barge. Shoulder pain

Employee's finger was caught between a wrench and metal while disconnecting lugs.

Employee was tightening bolts and wrench pulled free and popped employee in the face.

Lining up pump. Over extended arm

Employee was tightening the 2 inch that was loose. It broke and sprayed liquor

enforcement finding was hammering with a different hammer, at end of shift had soreness and tightness of right shoulder, neck and upper back

Employee was assisting with installation of air conditioner and strained shoulder while using a come along to raise unit into place. Patient was placed on restricted duty today 6/28/2013

Employee was hammering on valve and felt immediate pain to left side of groin area. Bulge was found over pubic area. Hernia confirmed on 4/10/2013.

Employee was training new employees on how to lock a valve. He had a slip in attention and hit his leg with a hammer sustaining a laceration that required 4 sutures to close.

Employee was closing a valve with a hammer and hit his hand on the knocker of the valve.

Employee was working overtime and was using a wrench to open a valve and the wrench slipped and he struck his hand against an adjacent valve causing his right thumb to be caught between the wrench and valve handle resulting in fracture to thumb.

Employee was breaking scale on a screen box and was using a sledge hammer to strike side of screen box. He contacted one of the swing bolts while hitting the screen box causing a laceration on his right middle finger that required sutures to close wound.

Employee strained his left thumb while shoveling hydrates off of the floor.