Every injury and fatality MSHA has on file. Filter by state, year, sector, classification, experience, or any keyword from the investigator's narrative.
Email me when a new incident matches these filters. One confirmation email; unsubscribe anytime.
Large rock was on rock breaker hydraulic line, went to roll rock off line when it rolled catching thumb between rock and frame of breaker causing a small laceration.
Injured was removing dirt off a R60 Hauler with Compressed air, piece of debris went under safety glasses and into their eye
Was removing conveyor belt off welding truck, hit hand against vise, next day hand started hurting. Went to DR took x-ray, would let EE know. They called July 5 and said EE did have piece of metal. They removed it July 6, no stitches, no lost time.
Employee was picking up to 2 - 2.5 gallons of DEF when EE stated EE twisted back causing pain.
Employee was cleaning primary feeder out for repair work when they ran a finger across a sharp metal burr cutting finger that required stitches.
Removing a brass bushing off main shaft of crusher, bushing had oil on it. Another co-worker was helping lift bushing off but hand slipped causing bushing to fall and caught employee's fingers under bushing causing bruising to end of index, middle and ring fingers on right hand.
Employee was working on AC unit for a 988F loader. EE was inside the cab cleaning dust out of the vent when EE cut finger requiring stitches.
Employee was changing a light bulb in the control panel at our pug mill plant. The bulb broke causing a laceration to right index finger tip. Laceration required stitches.
Employee was removing a metal strainer from a pvc line at our Sand plant, when he tried to remove the pvc line from the metal strainer he cut top of left thumb.
Employee operates heavy equipment. He went to climb ladder on a R-60 Euclid Haul truck when he felt pain in his back
Employee was carrying a 4" pipe about 8' long. He went to lay pipe on forks of a lull when he caught finger between pipe and end of fork on lull mashing his finger. He fractured tip of his little finger.
EE was putting new brake pads on dump truck when he felt a strain in lower back. Employee went to doctor and was put on light duty work for 4 days.We are looking into this accident. We had a helper with him, he did not report any injury friday before he left work but came in monday morning first thing and reported back injury.
Employee was helping unload motor, motor slipped, caught rt thumb between motor and truck bed, causing brusing to rt thumb. Doctor put rt hand in a brace.
Employee was down on his knees shoveling material out from under conveyor, when he felt a sharp pain in middle of back. He went to Doctor, told he had some bruising.
EMPLOYEE WAS HELPING CO-WORKER SET CRUSHER LID BACK ON CRUSHER. WHEN HE WAS POSITIONING THE LID, HE CAUGHT HIS RT. RING FINGER UNDER THE LID CAUSING A FRACTURE & FINGERNAIL REMOVAL WHICH REQUIRED STITCHES.
EE WAS HELPING ANOTHER EE REPLACE A STAR PLATE ONTO CANICA CRUSHER. USING A CRANE TO LIFT STAR PLATE (45-50#'S)WHILE UNHOOKING PLATE EE HAD HIS FOOT UNDER PLATE & IT FELL 3-4" ONTO HIS FOOT. CAUSED BRUISED FOOT. EE WAS WEARING HARD TOE SHOES. EE DID NOT GO TO DR UNTIL 4/23/04. EE ON CRUTCHES FOR A WEEK.
EE WAS ROLLING UP TARP ON DUMP TRAILER, TARP WAS HEAVY, HANDLE GOT AWAY FROM EE AND HIT HIS ARM, CAUSING A CONTUSION TO RIGHT ARM REQUIRING HIM TO WEAR A ARM SPLINT.
EE WAS CLEANING OUT CRUSHER THAT HAD BEEN LOCKED OUT WHEN A ROCK FELL AND HIT EE ON HIS RIGHT MIDDLE FINGER.
EE WAS PUTTING A CUTTING EDGE ON 988F LOADER WHEN CUTTING EDGE SLIPPED AND FELL ON EE'S LEFT HAND FINGERS CAUSING TWO SMASHED FINGERS AND ONE BROKE FINGER.
EE WAS CHANGING DRILL BIT WHEN HIS GLOVE GOT CAUGHT BETWEEN BIT AND THREADS OF STEEL CAUSING THE LEFT MIDDLE FINGER TO BE DISLOCATED AT THE MIDDLE JOINT.
EMPLOYEE WAS GETTING IN DOZER, DOOR STARTED CLOSING AND CAUGHT HIS FINGERS IN DOOR, CAUSING CUTS AND SMASHING OF THE MIDDLE AND RING FINGER ON RIGHT HAND.
EE WAS DRILLING HE WENT TO CHANGE DRILL STEEL WHEN HE PICKED UP STEEL HE FELT A POPPING IN LOWER BACK
EE WAS GOING TO CLEAN UP AROUND BOOTH WHEN ROCK CAME OUT OF FEEDER & FELL ON EE'S LEFT FOOT
EE WAS STOCKPILING. AFTER HE HAD DUMPED HIS LOAD OF ROCK HE COULDN'T GET HIS TAILGATE CLOSED, HE WENT TO THE BACK OF THE TRUCK AND SAW ROCK BETWEEN THE BED OF THE TRUCK AND TAILGATE, HE LIFTED UP TAILGATE TO LET ROCK OUT, WHEN HE DID TAILGATE CAUGHT HIS LEFT MIDDLE FINGER AND BROKE IT.
EE WAS SHOVELING MATERIAL OUT FROM UNDER BINS FOR APPROX. 10 MINUTES WHEN HE FELT PAIN IN HIS LOWER BACK AND DOWN HIS LEG.
EE WAS AT THE OLD SHAKER SCREEN, (NOT IN USE) TURNING A SHEAVE TOP REMOVE BELTS. THE COUNTER WEIGHT SHIFTED AND CAUGHT HIS ARM. THERE WAS A PIECE OF SPOT WELD ON THE METAL WHERE HIS ARM WAS AN D WHEN EE WENT TO PULL HIS ARM OUT IT CAUSED A LACERATION TO HIS RIGHT FOREARM.