Search the record

While tightening a bolt on a jaw crusher, the employee felt a twinge to his back.

EMPLOYEE WAS OPENING DOOR OF CRUSHER TO EXAMINE INSIDE. HE WAS USING A PRY BAR TO RELEASE SAFETY LOCK. WHEN THE LOCK BROKE FREE HIS LITTLE FINGER WAS PINCHED BETWEEN THE PRY BAR & THE DOOR.

OPERATOR WAS ATTEMPTING TO DISCONNECT TRAVERSE CABLE FROM THE DREDGE. THE CABLE WAS STILL UNDER TENSION AND THE OPERATOR WAS IN FRONT OF THE CABLE.WHEN HE LOOSENED THE CLAMP THE CABLE SLIPPED FORWARD STRIKING HIM.

Operator making adjustment to winch. Removed safety pin while tension was still applied to cable. Brake did not hold due to tension, winch handle spun hitting operator in the wrist & hand

Operator was attempting to release tension from a hand winch he pulled the safety pin without securing the winch handle, the brake was defective so it spun the handle, which striked the operat ors hand ors hand

EE WAS WORKING ON A WATER PUMP WITH A PIPE WRENCH WHEN THE WRENCH SLIPPED OFF AND SMASHED THE EE MIDDLE FINGER ON HIS RIGHT HAND.

EMPLOYEE STATES: WHILE CONDUCTING A SHOT SERVICE, LOADING HOLES MANUALLY WITH LOADING POLE. THE POLE CAME DOWN FAST THROUGH HANDS AND JERKED NECK AND BACK.

EE WAS CLEANING OUT FROM UNDER HIS BELT WITH A SHOVEL WHEN HE FELT LIKE HE PULLED A MUSCLE IN HIS BACK.

THEY WERE MAKING A LACE IN ONE OF THE BELTS. THE COMEALONG WAS HOOKED TO THE BELT CLAMPS HOLDING THE BELT TOGETHER WHILE THEY LACED THE BELT. AFTER MAKING THE LACE, EE WAS RELEASING THE COMEAL ONG AND IT SLIPPED, PINCHING HIS HAND AND BREAKING HIS LEFT THUMB.

RAIL CAR DE RAILED EE WAS USING FROGS TOOL TO PUT CAR BACK ON TRACK-REPORTED ON 1-11-02 EE EXPRESSED THE NEED TO SEE DR THE DR REFERRED HIM TO A SURGEON-THE SURGEON WAS SEEN ON 2-5-02. HE CONF IRMED HERNIA.

EE WAS USING A RATCHET WRENCH TO AEDJUST A TRUNNION, WRENCH SLIPPED & STRUCK EE IN NECK BELOW JAW.

EE STRAINED L. SHOULDER WHILE THROWING A GRAPPL-ING HOOK TO FISH OUT A CABLE IN THE LAKE.

2 EE WERE STRIKING A PUNCH WITH A HAMMER TO REMOVE AN OLD BOLT. SMALL PIECE OF METAL CAME OFF THE BOLT INTO THE EE EYE.

EE SAID HE WAS USING A PRY BAR OF THE RAILCAR DOOR WHEN THE BAR SLIPPED TWISTING HIS BACK.

EMPLOYEE WAS TRYING TO SECURE A WOOD PIECE ON CONVEYOR AND STRUCK THUMB CAUSING A LACERATION.

LOCKING RAIL CAR DOORS WITH 4 LB. HAMMER, CAUSING EMPLOYEE'S HIP TO DISLOCATE.

THE INJURY DATE WAS ON 4/6/01. THE EE RECEIVED FIRST-AID TREATMENT AND WAS ON REGULAR DUTY UNTIL 4-27-01. A DIAGNOSIS WAS MADE ON 5-1-01, WHICH PLACED THE EE ON MOIFIED DUTY.

EMPLOYEE WAS TIGHTENING BOLT ON #12 BELT IN PLANT WHEN WRENCH SLIPPED CAUSING HIS ARM TO HIT SHARP PEICE OF METAL.

EMPLOYEE WAS CUTTING A HOSE WITH HIS OWN KNIFE &SLIPPED, PUTTING KNIFE INTO HIS OWN THIGH.

THIS IS AN AMMENDED REPORT - EE WENT OUT FOR SURGERY ON HIS SHOULDER. EE'S WAS TIGHTENING BOLTS ON DREDGE PIPE.

EE WAS USING A BAR TO LOOSEN ROCK THAT WAS STUCK IN A CHUTE. THE BAR SLIPPED AND HIT THE EE IN HIS MOUTH BREAKING A TOOTH.

EE WAS HELPING ANOTHER EE TIGHTEN BOLTS ON A SPROCKET THE WRENCH SLIPPED OFF THE NUT STRIKINGLEFT HAND

TRYING TO GET GREASE GUN PRIMED. HIT GUN ON RUBBER SLEVE OF FRESH WATER PUMP. THERE WAS A STUD STICKING OUT OF RUBBER SLEVE AND FINGER WAS HIT BETWEEN STUD AND GREASE GUN TEARING OFF FINGERNAI L AND BREAKING TIP OF FINGER.