Search the record

Employee fell off of the loader and injured shoulder. Injury was not reported at time of the incident.

The miner's arm was caught between two blocks leading to pain and swelling of the right forearm.

The miner was cutting a belt and accidentally cut left wrist.

The miner was using a welding torch when the oxygen hose burst and ignited. The fire burned through the miners' jacket and shirt resulting in a burn to EE's stomach.

Opened inspection door to check adjustment, turned rotor when I felt something pop in right shoulder

While installing a screen on the middle deck, employee had hand on bottom of screen when the screen shifted and caught hand and fingers between screen and bottom of deck. Employee was treated and received stitches. Employee returned to work the following day with restrictions.

Miner was performing housekeeping duties under a steel structure that supports a stacker/conveyor belt. As EE crouched down, the hard hat slipped off EE's head. When EE stood back up, EE hit head on the low part of the steel structure. EE was transported to urgent care by a co-worker. EE received 3 staples to close the cut on EE's head.

Employee was walking up a hill when some 8" rocks came down striking their foot. Employee was wearing steel toed boots, rock hit in lace area.

Employee tried to fix a skirt board rubber while belt was in operation. Employee did not contact the Plant operator as required for Lockout. Injured Thumb- right hand

While stepping down the ladder of the haul truck, employee slipped off step and fell and landed on the ground.

Employee was carrying a chain to the primary feeder to wrap around a rock. The employee tripped and fell on same level. EE caught the fall using right wrist causing EE's wrist to fracture.

The employee dropped something while using a torch. EE bent over to pick up the item and the flame from the torch burnt EE's arm. EE states should have turned the torch off before retrieving item. Employee has a 2nd degree burn on right arm. No lost time from work.

Employee was working on the crusher. EE went to grab a tool when EE tripped over frozen mud. Tried to catch self on nearby truck, but fell anyways pushing EE's arm behind self.

Slipped and fell on ground while walking and hit head. Received staples in the head and is able to return to work full duty.

Employee was welding within the primary crusher when a piece of hot material fell into the top of a boot and burned their ankle and foot. Employee went to the emergency room and was transported to a burn unit. Diagnosed the injury as third degree burns on their right foot. Employee has not returned to work.

Reported STS hearing loss

Reported STS hearing result

Miner was operating a haul truck which was being loaded. A large stone was placed in bed which caused the truck to shake. Miner felt sharp pain in back and neck.

Employee was cutting a ACSR cable with a band saw. EE was holding the cable in EE's left hand, saw in the right. After the cut was made, the blade stopped and came to a rest on top of EE's left hand, causing a cut requiring four stitches. The employee finished EE's shift after the cut, got the stitches and returned for work at the normal starting time the next day.

Employee lost control of vehicle while descending the ramp. EE hit a rock which stopped the vehicle. EE left hand hit dashboard on impact.

Employee slipped on the crusher framework and fell onto back.

Employee was removing a guard when EE received a laceration on right hand from a sharp edge.

Employee was dragging a roller up a catwalk when EE felt a pain in back.

Employee was cutting a bolt with a torch. A piece of hot steel landed on his right pinky finger. Employee waited to report and get medical attention, the finger swelled, blistered then became infected.

Employee's left hand became entrapped between the head pulley and belt cleaner while inspecting a chute on the Screening belt #3.

Was walking around stationary vehicle on bench.

Employee's annual audiogram and follow-up audiogram indicate a standard threshold shift hearing loss.

Loose stone was not removed and/or secured prior to entering the crusher. Employee was stuck and trapped by 2 rocks that fell from an elevated position. Employee felt that the rocks were not going to move prior to the accident.

A non-employee of Ward Sand was trespassing on the mine site. He and 2 other friends drove their ATVs out on the frozen dredge pond. Approx 1000 ft from shore the victim and bike fell through the ice and died.

Employee was jumping an excavator when the battery exploded. Two employees were injured.

Employee was jumping an excavator when the battery exploded. Two Employees were injured.

Employee was operating a water wagon (E21) when he turned into a passing haul truck. Employee stated that he did not see the haul truck prior to turning.

While grinding, the grinder jumped and hit the employees hand causing a laceration that need stitches.

Employee was helping move a 55 gallon drum when it slipped and struck his ankle causing a laceration requiring stitches.

A piece of grade blade fell, as the employee reached for it he felt a pain in his side and back.

Slipped on ladder per activity

Working on 988 loader in maintenance shop.

Employee was lifting a pip-men out of the primary crusher when the worn/greased shaft slide out of its position, falling onto the crane's operator station.

Employee was changing a tire on a light duty pickup truck when he twisted his ankle.

Employee was pulling/hanging an electrical cable when he came in contact with the two copper wires. There was a piece of the outer jacket that was worn out which the employee did not notice.

employee was climbing into the haul truck when he slipped and caught himself on the ladder causing a strain to his arm/shoulder

Employee twirled his hand on the engine pull start

Lifting steel plate - performing routine maintenance, when the plate fell crushing finger.

Employee was removing bolts inside the crusher when one of the impellers moved & knocked employee back into the metal bar.

Employee was assisting the disassembly of a crane when the outrigger lock lever struck his right index finger.

The employee believed he had lowered the dump body on the 35 ton haul truck. He hit the conveyor, which fell onto the back of the truck. When the truck hit the conveyor the truck tilted on back wheels until it broke free from the convoyer causing the truck to land back on all 4 tires.

Employees were cleaning screen house spillage. They opened a floor panel to drop stone into bins. The injured employee walked up onto the stone pile which started to slide. Employee could not stop himself from sliding. The stone and employee slid into the the bin. He fell approx 20 ft onto stone in bin.

Employee was repairing a screen barring when the wrench slipped causing the employee's finger to get jammed between the wrench and barring.

While climbing a ladder he slipped and fell.

EE WAS PERFORMING MAINTENANCE ON A HAUL TRUCK. WHEN HE WENT TO REMOVE HIS HAND, HIS FINGER BECAME CAUGHT ON THE HEATER BOX. HIS FINGER WAS CUT WHEN HE TRIED TO REMOVE IT.