Search the record

Foot slipped on ladder rung, shin scraped underside of ladder and was lacerated.

Miner stepped down off plant ladder and rolled ankle. Miner was using three points of contact and was wearing full top steel toe boots. Ground conditions were smooth and well kept.

Cutting Conveyor Belt, employee slipped and cut self

Cleaning off part of plant, did not use provided gloves, received large sliver.

Miner slipped on ice and broke knee.

Miner fell while on ladder and entangled fingers in a belt scrapper and belt causing injuries to fingers.

The injured employee was blowing dust off the plant with compressed air, while blowing the dust off they broke protocol and inserted the air nozzle behind a guard on the under side of a tail pulley. The pulley yanked the nozzle from the employees hands cutting their palm.

The mine foreman was cutting a damaged piece of belting out with a utility knife, EE placed EE's hand in a bad position while cutting and slit EE's hand. EE drove to a local clinic where they gave EE 4 stitches. EE returned to work, total time away from work approx. 4 hours.

Injured Employee set a piece of welding equipment up on the frame of a machine and was struck when EE ducked under the frame and the equipment fell down. EE's hard hat stopped most of the damage, but it was pushed off and EE received a large gash on the back of head. EE was taken in for treatment. EE missed two days and has been released for work.

Employee states they were stepping down from a ladder when they twisted their left foot/ankle.

Employee states he was lifting screens and pulling cords.

Employee reported that he was sweeping a sample box through product coming off conveyor belt to collect aggregate material when he felt a sharp pain in his right shoulder.

welding cable struck employee in the mouth

Employee slipped and fell on ice; landed on his shoulder; left shoulder contusion, with rotator cuff acute tendonitis.

Employee states he sustained welding flash burns to his eyes.

Employee was taking the counterweight cover out of the cone crusher. When he pulled back to get it loose, his hand hit a piece of brass bushing, and it peeled away some of the skin on his hand.

Removal of wheel cover plate from primary crusher for transport. Lowering wheel cover plate into feeder, struck left hand/thumb. Fracture to left thumb.

Co-worker called to report that worker seemed to be overheated from changing screens.

While employee was going down ladder to get off loader, he twisted his left ankle. He had medical evaluation later that day, but no medical treatment. Pain symptoms persisted, so he was re-evaluated medically on 8/12/13, and referred for physical therapy treatment.

Employee was struck by a hammer just below the eye

Employee tripped on a pallet jack and fell, fracturing her left fibula.

Employee Dropped a heavy metal shim on his left foot.

Employee states he was putting some lacing in the weigh bin when his left shoulder popped. He sought initial medical treatment on 8/29/11.

Employee was lifting a gearbox and strained his back.

Employee states he was helping to install a deck when he slipped and pulled a muscle in his right arm.

Employee stepped on a 2 x 2 retainer block and rolled his right ankle, causing an ankle sprain.

Employee went to the doctor on 3/12/2011 because he believed he got a piece of foreign material in his eye on 3/11/2011. He notified the employer on 3/14/2011.

Employee was stepping down from a mobile equipment ladder. On his last step to the ground, he stepped on uneven frozen ground and twisted ankle.

Employee was trying to close and latch dozer door frozen due to cold weather when he slammed the door on his finger.

Employee collapsed while loading bulk explosives into boreholes in preparation for a production blast. CPR was started immediately by co-workers. Employee was taken by ambulance to local hospital and pronounced dead approx 1 hour later. Autopsy results are currently pending. Co-workers stated employee appeared normal leading up to the incident and showed no signs of distress.

Employee was working on cone change when he got a piece of steel in his eye.

Employee was throwing rocks out from behind a boulder; while he was throwing, he was turning his back. Reports back strain.

Employee reports pinching finger between screen box and conveyor while folding screener wing.

While changing cutting edges, bolt spun around and cut hand.

Unknown at this time.

Received written notification from employee on 12/22/08 that he believed he had pulled a muscle in his back from operating a dozer in July.

Employee was finishing up work on loader and putting tools away. Experienced sharp pain in middle back under shoulder blade. Employee states he was twisting and reaching in an awkward position.

Employee pinched finger while unhooking dollies from dozer.

Employee was using a utility knife to cut a belt. He cut his right thigh with the knife.

Putting toggle seat in pitman on breaker. The seat slipped and pinched finger.

Employee reports putting on rubber boots that were too tight, causing a hole to be worn into the skin of his right foot.

Employee states he felt a twang in his shoulder while pulling electrical cords.

Employee hit his right index finger with a maul, causing injury.

Notification from American Industrial Medical, Inc. of confirmation of miner's Standard Threshold Shift (STS) in hearing.

Employee was checking the anti-freeze on his haul truck. The night of 2/8/05 the weather caused frost to bank the quarry. As ee was climbing down, the step had a build up of frost on it and he lost his footing / balance and fell onto concrete. He was wearing a safety helmet and reflector vest.

Employee reports stiffness in back due to operating loader on frozen ground.

Employee was changing roll plant screens. He scratched the tip of his elbow on the edge of the screen frame. An infection formed in his arm.

Employee was pulling on a pipe wrench to change spouts on fuel tank. Employee reports pain in chest area due to stretched ligament.

Employee was helping to fold stacking conveyor, standing on a shroud on the edge of the conveyer. Conveyor shook, causing employee to fall to the ground.

Employee was grinding and a piece of hot metal went under his safety glasses and stuck in his eye.