Lw Propman
At approximately 10:15am an employee received fatal crushing injuries as he was helping move a Longwall power center. The fatal injuries occurred when the employee was crushed between the power center and rib as the power center was being moved into a cross cut.
Texto original en inglés de la MSHA
On Tuesday, September 11, 2012, at approximately 10:23 a.m., a 28-year-old miner was fatally injured when he was crushed between a large power center and the coal rib. The power center was being moved by two large, articulating diesel forklifts, one pulling and the other pushing. While the lead forklift was being repositioned with the use of hydraulic lifting and steering controls, the victim was located between the power center and the coal rib. This process caused unexpected sliding movement of the power center, pinning the victim against the coal rib. The size of the power center prevented the fork lift operators and a foreman, positioned near the operator’s compartment of one of the forklifts, from seeing the victim’s location. Verbal communication was also hampered by noise from the diesel engines on the forklifts. Mine management had a General Equipment Operation Procedure in place at the time of the accident to follow when moving large mining equipment/components in the mine. The Shoal Creek Mine is owned and operated by Drummond Company, Inc. The mine is located in Walker County, Alabama, near the community of Oakman. The mine provides employment for 661 persons and operates seven days per week, three shifts per day. Production is conducted on an alternating schedule of five days one week and six days the next. The mine produces an average of 3,410 clean tons of coal per day. The miners are represented by the United Mine Workers of America (UMWA). The mine operates in the Blue Creek coal seam, with a mining height that ranges from seven to twelve feet. When the accident occurred, the mine was operating five mechanized mining units (MMUs) which were four continuous mining machine units and one longwall unit. The principal officials for the mine at the time of the accident were: A Regular Safety and Health Inspection (E01) had been completed on June 27, 2012, and an E01 inspection was ongoing at the time of the accident. The Non-Fatal Days Lost (NFDL) injury incidence rate for the mine for calendar year 2011 was 6.00, compared to the national NFDL rate of 3.36.
-
Mine management had a General Equipment Operation Procedure in place at the time of the accident to follow when moving large mining equipment/components in the mine. Management did not consider that the large equipment/components being moved prevented the forklift operator(s) from seeing ground personnel in close proximity to the object being moved. Additionally, noise produced by operating engines of the equipment normally used to move these objects limited verbal communications. Because mine management did not consider these visibility and communication hazards, persons in close proximity to large equipment were not properly trained.
Acción correctiva: Mine management developed and implemented a new procedure to be used when moving large pieces of equipment in the mine. A safeguard, which lists these new procedures, was issued by MSHA to require certain procedures to be followed when moving large pieces of equipment from, or to, any location in the mine. All mine personnel were trained in the new procedure and requirements of the safeguard. A record of the training was made and provided to MSHA.
Hallazgos del informe final de investigación de la MSHA, que sustituye la narrativa preliminar anterior.
- Actividad al momento del incidente
- Move Non-Self-Propelled Equip
- Subunidad / ubicación
- UNDERGROUND
- Ubicación subterránea
- VERTICAL SHAFT
- Método de minería
- Longwall
- Tipo de accidente
- Atrapado en, bajo o entre un objeto en movimiento y uno fijo
- Fuente de la lesión
- TRANSFORMERS,CONVERTERS
- Naturaleza de la lesión
- CRUSHING
- Parte del cuerpo afectada
- MULTIPLE PARTS (MORE THAN ONE MAJOR)
- Experiencia minera total
- 5 years
- Experiencia en esta mina
- 5 years
- Experiencia en este puesto
- 1 year
- Grado de la lesión
- FATALITY
Cada registro de esta página refleja lo que publica la MSHA en su programa de Datos Abiertos del Gobierno, actualizado semanalmente. La MSHA no publica URLs por accidente (los datos de Accidentes se distribuyen en un único archivo masivo), así que esta es la forma de recuperar la fuente del registro específico a continuación:
- Informe final de investigación: Lee el informe final de la MSHA
-
Registro del accidente:
Descargar MSHA Accidents.zip
luego busque el número de documento
220122610030(la clave única por Formulario MSHA 7000-1) -
Registro de la mina:
Sistema de Recuperación de Datos de Minas de la MSHA
y busque por ID de mina
0102901 - Todos los conjuntos de datos de la MSHA: Directorio del programa de Datos Abiertos del Gobierno que cubre Accidentes, Minas, Inspecciones, Infracciones, etc.