Muerte · Registro MSHA n.º 220150440016
Clerk
8 de enero de 2015
a las 2:00 PM
Operador:
Knife River Construction
(MDU Resources Group Inc)
Contratista en el sitio:
E611
San Joaquin Condado, CA
Clasificación
MAQUINARIA
Tipo
Atrapado en, bajo o entre un objeto en movimiento y uno fijo
Narrativa del investigador
Knife River miners were replacing a screen. Our sales representative was on site. He was on site to provide technical assistance. He was struck in the head by the feeder box. EMS was notified and responded. A Knife River operator notified MSHA within 15 minutes. Injured person was taken to the hospital where he then passed away.
Texto original en inglés de la MSHA
Investigación final de la MSHA
On January 8, 2015, Alan Tindall, Contract Sales Manager, age 63, was killed at this mine while working with mine personnel to install new screen panels in a tower screen. A loosened feeder box pivoted down, pinning Tindall between the box and the splash curtain support bracket on the screen. On January 7, 2015, the day before the accident, mine personnel cut four of the six retaining nuts and bolts holding the feeder box in place with a torch and the two remaining bolts were loosened to allow the old screens to slide out. This left the feeder box unsecured while the new screen panels were installed. The accident occurred due to management’s failure to establish policies and procedures for persons to safely remove the old screens and install new screens on the screen tower. The feeder box was not secured in place or blocked against hazardous motion because four of the six retaining nuts and bolts were cut off. After the nuts and bolts were cut off, the feeder box was never resecured and the four nuts and bolts were not replaced. The feeder box hung by the loosened bottom two nuts and bolts. Management also failed to ensure that an examination was conducted of the repairs on the screen. The repairs had been in progress for two days. The unsecured feeder box should have been recognized as a hazard by a work place examiner looking for hazardous conditions. The cut off nuts and bolts allowed the feeder box to move unexpectedly and pin the victim.
Hallazgos del informe final de investigación de la MSHA, que sustituye la narrativa preliminar anterior.
Detalles del registro
- Actividad al momento del incidente
- Observe Operations
- Subunidad / ubicación
- STRIP, QUARY, OPEN PIT
- Tipo de accidente
- Atrapado en, bajo o entre un objeto en movimiento y uno fijo
- Fuente de la lesión
- METAL COVERS & GUARDS
- Naturaleza de la lesión
- CRUSHING
- Parte del cuerpo afectada
- HEAD,NEC
- Experiencia minera total
- 11 years
- Experiencia en esta mina
- 0 years
- Experiencia en este puesto
- 11 years
- Grado de la lesión
- FATALITY
Verificar en MSHA
Cada registro de esta página refleja lo que publica la MSHA en su programa de Datos Abiertos del Gobierno, actualizado semanalmente. La MSHA no publica URLs por accidente (los datos de Accidentes se distribuyen en un único archivo masivo), así que esta es la forma de recuperar la fuente del registro específico a continuación:
- Informe final de investigación: Lee el informe final de la MSHA
-
Registro del accidente:
Descargar MSHA Accidents.zip
luego busque el número de documento
220150440016(la clave única por Formulario MSHA 7000-1) -
Registro de la mina:
Sistema de Recuperación de Datos de Minas de la MSHA
y busque por ID de mina
0405459 - Todos los conjuntos de datos de la MSHA: Directorio del programa de Datos Abiertos del Gobierno que cubre Accidentes, Minas, Inspecciones, Infracciones, etc.
Fuente: Administración de Seguridad y Salud Minera de EE. UU. (MSHA) · Documento 220150440016 · ID de mina 0405459
Vista de capacitación →