The miner was leaning over a piece of equipment while cutting a bolt with an oxy/acetylene torch when hot slag entered EE's right ear. The miner was treated and released to work with instructions to keep the ear clean and dry. EE was referred to another doctor for removal of the foreign object.
Radix Westside: 175 citaciones de la MSHA Metal/Non-Metal
Radix Westside tiene $46K en multas propuestas de MSHA y $0 pendientes en 3 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en Radix Westside.
- Muertes
- 0
- Incidentes totales
- 7
- Años en registro
- 2019–2026
- Último incidente
- Feb 2026
ⓘ
Esta tasa son las citaciones registradas divididas entre las horas de inspección de la MSHA, por cada 100 horas. Refleja el esfuerzo de inspección, no el tamaño de la mina ni la producción.ⓘ
Una orden bajo la Sección 107(a) retira a los mineros de un área cuando un inspector detecta un peligro inminente. Cada orden se levanta una vez corregida la condición, por lo que esto cuenta las órdenes emitidas, no las que están en vigor ahora.Radix Westside tiene $46K en multas propuestas de MSHA y $0 pendientes en 3 expedientes impugnados.
ⓘ
Las diferencias entre las multas propuestas y las pagadas reflejan tanto acuerdos y reducciones en conferencia como montos aun adeudados. Pendiente es el saldo que se debe actualmente.ⓘ
Las proporciones se calculan sobre las citaciones que llevan la codificación de gravedad y negligencia de la MSHA; una pequeña parte de los registros no está codificada.ⓘ
Impugnar una citación ante la Comisión Federal de Revisión de Seguridad y Salud Minera es un derecho legal. Estas cifras presentan los resultados públicos de ese proceso, según el archivo de Violaciones Impugnadas de MSHA.- Conciliadas 8 · 100%
ⓘ
Una citación Significativa y Sustancial cuenta como sobreviviente cuando la conciliación o la decisión del juez mantuvo la designación, o cuando la impugnación fue desestimada o quedó en rebeldía y la citación quedó como emitida. Las citaciones anuladas o retiradas, y las conciliaciones que quitaron la designación, cuentan en contra.ⓘ
Una reducción o desestimación ante la Comisión es un resultado legítimo de impugnar una multa propuesta. Las cifras son el monto propuesto y el monto confirmado en la decisión del expediente.| Expediente | Decisión | Juez | Año | Propuesta / confirmada |
|---|---|---|---|---|
| CENT 2021-0078 | Settlement | Manning | 2021 | $4K → $2K |
| CENT 2018-0429 | Settlement | Bulluck | 2018 | $346 → $118 |
| CENT 2017-0091 | Settlement | Miller | 2017 | $114 → $114 |
ⓘ
Una muestra es una medición de cumplimiento en un momento dado, no un historial de exposición individual. Estas cifras describen registros de muestreo de MSHA y no establecen causalidad ni dosis personal.Contaminantes en minas de metal y no metal (muestras personales)
ⓘ
Muchas muestras son mediciones de detección de sustancias sin límite de exposición aplicable; se cuentan como muestras pero se excluyen de toda cifra de exceso. Los porcentajes de exceso usan solo muestras con límite establecido.
Última medición: 2026-08-05
ⓘ
Muchas muestras son mediciones de detección de sustancias sin límite de exposición aplicable; se cuentan como muestras pero se excluyen de toda cifra de exceso. Los porcentajes de exceso usan solo muestras con límite establecido.- Diesel particulate (total carbon)342 en exceso
- Respirable dust, <.1mg11
- Nuisance dust, respirable, <1% Qtz7
- Nuisance dust, total, <1% Qtz6
Ver los análisis individuales (100)
| Fecha | Contaminante | Concentración | Límite | Conc / límite | Ocupación |
|---|---|---|---|---|---|
| 2025-07-29 | EC @ 160 | 254 | 160 | 1.59 | Scaling (hand) |
| 2025-07-29 | TC @ 160 | 343 | 160 | 2.14 | Scaling (hand) |
| 2025-06-04 | EC @ 160 | 312 | 160 | 1.95 | Scaling (hand) |
| 2025-06-04 | TC @ 160 | 520 | 160 | 3.25 | Scaling (hand) |
| 2026-08-05 | TC @ 160 | 0 | 160 | 0.00 | Scaling (mechanical) |
| 2026-08-05 | EC @ 160 | 0 | 160 | 0.00 | Scaling (mechanical) |
| 2026-08-05 | TC from EC @ 160 | 0 | 160 | 0.00 | Scaling (mechanical) |
| 2026-08-05 | ORGANIC CARBON | 0 | Scaling (hand) | ||
| 2026-08-05 | TC @ 160 | 66 | 160 | 0.41 | Scaling (hand) |
| 2026-08-05 | EC @ 160 | 0 | 160 | 0.00 | Scaling (hand) |
| 2026-08-05 | TC from EC @ 160 | 0 | 160 | 0.00 | Scaling (hand) |
| 2026-08-05 | ORGANIC CARBON | 0 | Front-end Loader Operator | ||
| 2026-08-05 | TC @ 160 | 58 | 160 | 0.36 | Front-end Loader Operator |
| 2026-08-05 | EC @ 160 | 0 | 160 | 0.00 | Front-end Loader Operator |
| 2026-08-05 | TC from EC @ 160 | 0 | 160 | 0.00 | Front-end Loader Operator |
| 2026-08-05 | ORGANIC CARBON | 0 | Blaster, Powder Gang | ||
| 2026-08-05 | TC @ 160 | 113 | 160 | 0.71 | Blaster, Powder Gang |
| 2026-08-05 | EC @ 160 | 89 | 160 | 0.56 | Blaster, Powder Gang |
| 2026-08-05 | TC from EC @ 160 | 0 | 160 | 0.00 | Blaster, Powder Gang |
| 2026-08-05 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2026-08-05 | Quartz, respirable, >1% Qtz | 0.72 | 1.64 | 0.44 | Cleanup Man |
| 2026-08-05 | Respirable dust, <.1mg | 0 | Truck Driver | ||
| 2026-08-05 | ORGANIC CARBON | 0 | Scaling (mechanical) | ||
| 2026-08-05 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2025-08-19 | TC from EC @ 160 | 0 | 160 | 0.00 | Scaling (hand) |
| 2025-08-19 | TC @ 160 | 120 | 160 | 0.75 | Scaling (hand) |
| 2025-08-19 | ORGANIC CARBON | 0 | Scaling (hand) | ||
| 2025-08-19 | EC @ 160 | 90 | 160 | 0.56 | Scaling (hand) |
| 2025-07-29 | ORGANIC CARBON | 90 | Scaling (hand) | ||
| 2025-07-29 | TC from EC @ 160 | 0 | 160 | 0.00 | Scaling (hand) |
| 2025-06-04 | TC from EC @ 160 | 0 | 160 | 0.00 | Scaling (hand) |
| 2025-06-04 | ORGANIC CARBON | 0 | Scaling (mechanical) | ||
| 2025-06-04 | TC @ 160 | 0 | 160 | 0.00 | Scaling (mechanical) |
| 2025-06-04 | EC @ 160 | 0 | 160 | 0.00 | Scaling (mechanical) |
| 2025-06-04 | TC from EC @ 160 | 0 | 160 | 0.00 | Scaling (mechanical) |
| 2025-06-04 | ORGANIC CARBON | 0 | Front-end Loader Operator | ||
| 2025-06-04 | TC @ 160 | 0 | 160 | 0.00 | Front-end Loader Operator |
| 2025-06-04 | EC @ 160 | 0 | 160 | 0.00 | Front-end Loader Operator |
| 2025-06-04 | TC from EC @ 160 | 0 | 160 | 0.00 | Front-end Loader Operator |
| 2025-06-04 | ORGANIC CARBON | 207 | Scaling (hand) | ||
| 2025-06-04 | ORGANIC CARBON | 0 | Blaster, Powder Gang | ||
| 2025-06-04 | TC @ 160 | 0 | 160 | 0.00 | Blaster, Powder Gang |
| 2025-06-04 | EC @ 160 | 0 | 160 | 0.00 | Blaster, Powder Gang |
| 2025-06-04 | TC from EC @ 160 | 0 | 160 | 0.00 | Blaster, Powder Gang |
| 2024-10-23 | Nuisance dust, respirable, <1% Qtz | 0.12 | 10 | 0.01 | Crusher Oper/Worker |
| 2024-10-23 | Quartz, respirable, >1% Qtz | 0.9 | 1.89 | 0.48 | Cleanup Man |
| 2024-10-23 | Respirable dust, <.1mg | 0 | Truck Driver | ||
| 2024-10-23 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2024-04-04 | EC @ 160 | 0 | 160 | 0.00 | Mechanic |
| 2024-04-04 | TC from EC @ 160 | 0 | 160 | 0.00 | Mechanic |
| 2024-04-04 | ORGANIC CARBON | 0 | Scaling (hand) | ||
| 2024-04-04 | TC @ 160 | 0 | 160 | 0.00 | Scaling (hand) |
| 2024-04-04 | EC @ 160 | 0 | 160 | 0.00 | Scaling (hand) |
| 2024-04-04 | TC from EC @ 160 | 0 | 160 | 0.00 | Scaling (hand) |
| 2024-04-04 | ORGANIC CARBON | 0 | Scaling (mechanical) | ||
| 2024-04-04 | TC @ 160 | 0 | 160 | 0.00 | Scaling (mechanical) |
| 2024-04-04 | EC @ 160 | 0 | 160 | 0.00 | Scaling (mechanical) |
| 2024-04-04 | TC from EC @ 160 | 0 | 160 | 0.00 | Scaling (mechanical) |
| 2024-04-04 | ORGANIC CARBON | 0 | Mechanic | ||
| 2024-04-04 | TC @ 160 | 0 | 160 | 0.00 | Mechanic |
| 2023-05-10 | Respirable dust, <.1mg | 0 | Truck Driver | ||
| 2023-05-10 | Respirable dust, <.1mg | 0 | Cleanup Man | ||
| 2023-05-10 | Respirable dust, <.1mg | 0 | Truck Driver | ||
| 2023-05-10 | Nuisance dust, respirable, <1% Qtz | 0.24 | 10 | 0.02 | Crusher Oper/Worker |
| 2022-10-19 | ORGANIC CARBON | 0 | Front-end Loader Operator | ||
| 2022-10-19 | TC from EC @ 160 | 0 | 160 | 0.00 | Front-end Loader Operator |
| 2022-10-19 | EC @ 160 | 0 | 160 | 0.00 | Front-end Loader Operator |
| 2022-10-19 | TC @ 160 | 0 | 160 | 0.00 | Front-end Loader Operator |
| 2022-10-19 | TC from EC @ 160 | 0 | 160 | 0.00 | Blaster, Powder Gang |
| 2022-10-19 | EC @ 160 | 0 | 160 | 0.00 | Blaster, Powder Gang |
| 2022-10-19 | TC @ 160 | 0 | 160 | 0.00 | Blaster, Powder Gang |
| 2022-10-19 | ORGANIC CARBON | 0 | Blaster, Powder Gang | ||
| 2022-10-19 | TC from EC @ 160 | 0 | 160 | 0.00 | Scaling (hand) |
| 2022-10-19 | EC @ 160 | 0 | 160 | 0.00 | Scaling (hand) |
| 2022-10-19 | TC @ 160 | 45 | 160 | 0.28 | Scaling (hand) |
| 2022-10-19 | ORGANIC CARBON | 31 | Scaling (hand) | ||
| 2022-10-19 | TC from EC @ 160 | 0 | 160 | 0.00 | Scaling (mechanical) |
| 2022-10-19 | EC @ 160 | 0 | 160 | 0.00 | Scaling (mechanical) |
| 2022-10-19 | TC @ 160 | 0 | 160 | 0.00 | Scaling (mechanical) |
| 2022-10-19 | ORGANIC CARBON | 0 | Scaling (mechanical) | ||
| 2022-02-23 | Nuisance dust, respirable, <1% Qtz | 0.18 | 10 | 0.02 | Utility Man |
| 2022-02-23 | Respirable dust, <.1mg | 0 | Truck Driver | ||
| 2021-10-27 | ORGANIC CARBON | 0 | Supervisor, Co. Official | ||
| 2021-10-27 | TC @ 160 | 0 | 160 | 0.00 | Supervisor, Co. Official |
| 2021-10-27 | EC @ 160 | 0 | 160 | 0.00 | Supervisor, Co. Official |
| 2021-10-27 | TC from EC @ 160 | 0 | 160 | 0.00 | Supervisor, Co. Official |
| 2021-10-27 | ORGANIC CARBON | 0 | Drill Operator, Rotary Air | ||
| 2021-10-27 | TC @ 160 | 0 | 160 | 0.00 | Drill Operator, Rotary Air |
| 2021-10-27 | EC @ 160 | 0 | 160 | 0.00 | Drill Operator, Rotary Air |
| 2021-10-27 | TC from EC @ 160 | 0 | 160 | 0.00 | Drill Operator, Rotary Air |
| 2021-10-27 | ORGANIC CARBON | 0 | Scaling (hand) | ||
| 2021-10-27 | TC @ 160 | 31 | 160 | 0.19 | Scaling (hand) |
| 2021-10-27 | EC @ 160 | 0 | 160 | 0.00 | Scaling (hand) |
| 2021-10-27 | TC from EC @ 160 | 0 | 160 | 0.00 | Scaling (hand) |
| 2021-10-27 | ORGANIC CARBON | 0 | Scaling (mechanical) | ||
| 2021-10-27 | TC from EC @ 160 | 0 | 160 | 0.00 | Scaling (mechanical) |
| 2021-10-27 | TC @ 160 | 32 | 160 | 0.20 | Scaling (mechanical) |
| 2021-10-27 | EC @ 160 | 0 | 160 | 0.00 | Scaling (mechanical) |
| 2021-05-12 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2021-05-12 | Respirable dust, <.1mg | 0 | Truck Driver |
Muestras de área (aire de molino y taller)
Última medición: 2026-08-05Ver los análisis individuales (14)
| Fecha | Contaminante | Concentración | Límite | Conc / límite | Área muestreada |
|---|---|---|---|---|---|
| 2026-08-05 | TC @ 160 | 0 | UG TRAVEL/HAULAGE | ||
| 2026-08-05 | EC @ 160 | 0 | UG TRAVEL/HAULAGE | ||
| 2025-08-19 | TC @ 160 | 0 | UG TRAVEL/HAULAGE | ||
| 2025-08-19 | EC @ 160 | 0 | UG TRAVEL/HAULAGE | ||
| 2025-07-29 | EC @ 160 | 0 | UG TRAVEL/HAULAGE | ||
| 2025-07-29 | TC @ 160 | 0 | UG TRAVEL/HAULAGE | ||
| 2025-06-04 | TC @ 160 | 0 | UG TRAVEL/HAULAGE | ||
| 2025-06-04 | EC @ 160 | 0 | UG TRAVEL/HAULAGE | ||
| 2024-04-04 | TC @ 160 | 0 | UG TRAVEL/HAULAGE | ||
| 2024-04-04 | EC @ 160 | 0 | UG TRAVEL/HAULAGE | ||
| 2022-10-19 | TC @ 160 | 0 | UG TRAVEL/HAULAGE | ||
| 2022-10-19 | EC @ 160 | 0 | UG TRAVEL/HAULAGE | ||
| 2021-10-27 | TC from EC @ 160 | 0 | UG TRAVEL/HAULAGE | ||
| 2021-10-27 | EC @ 160 | 0 | UG TRAVEL/HAULAGE |
Radix Westside registró 0.00 casos de lesión reportables por cada 100 trabajadores a tiempo completo en 2025.
ⓘ
Esta tasa son los casos de lesión reportables por cada 100 trabajadores a tiempo completo por año, calculada como 200,000 por los casos dividido entre las horas-empleado reportadas por el operador a la MSHA. Los casos son lesiones que la MSHA clasificó en grado 01 a 07; se excluyen los eventos de solo accidente que no lesionaron a nadie, y también las lesiones de contratistas, cuyas horas no corresponden a una sola mina. Las tasas comienzan en el año 2000, cuando inicia el reporte trimestral de empleo, y se omiten por debajo de 20,000 horas en un año.| Año | tasa de casos totales | días perdidos | mortales |
|---|---|---|---|
| 2025 * | 0.00 | 0.00 | 0.000 |
| 2024 * | 6.16 | 6.16 | 0.000 |
| 2023 * | 0.00 | 0.00 | 0.000 |
| 2022 * | 0.00 | 0.00 | 0.000 |
| 2021 * | 13.11 | 6.56 | 0.000 |
| 2020 * | 16.46 | 0.00 | 0.000 |
| 2019 * | 9.14 | 9.14 | 0.000 |
- Springfield Underground, Inc 2012 a 2016
- Radix Quarries 2016 al presente
| Año | Empleados |
|---|---|
| 2026 | 19 |
| 2025 | 18 |
| 2024 | 19 |
| 2023 | 19 |
| 2022 | 21 |
| 2021 | 15 |
| 2020 | 13 |
| 2019 | 11 |
| 2018 | 10 |
| 2017 | 6 |
| 2016 | 4 |
| 2015 | 2 |
| 2014 | 1 |
Radix Westside se ubica en Greene County, Missouri, donde la categoría minera del Censo representa el 0.1% del empleo del condado.
ⓘ
Las cifras del condado provienen de la Encuesta sobre la Comunidad Estadounidense de la Oficina del Censo de EE. UU., estimaciones quinquenales agrupadas, por lo que la edición de 2023 abarca de 2019 a 2023. La categoría del Censo es 'minería, explotación de canteras y extracción de petróleo y gas', que es más amplia que la jurisdicción de la MSHA e incluye a trabajadores de petróleo y gas que ninguna mina emplea. Estas cifras describen el condado circundante, no esta mina, y no son un factor en ningún incidente específico.ⓘ
Citaciones por millón de horas-empleado reportadas. Las tasas comienzan en el año 2000, cuando inician los datos trimestrales de empleo de la MSHA; los incidentes anteriores se cuentan pero no pueden ajustarse por tasa. Los trimestres con menos de 100,000 horas reportadas se muestran en gris: muy pocas horas para una tasa estable.| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2026 Q2 | 8,117 | 5 | 0 | 616.0 |
| 2026 Q1 | 7,742 | 1 | 0 | 129.2 |
| 2025 Q4 | 9,059 | 7 | 1 | 772.7 |
| 2025 Q3 | 9,022 | 5 | 0 | 554.2 |
| 2025 Q2 | 5,822 | 5 | 2 | 858.8 |
| 2025 Q1 | 7,926 | 3 | 0 | 378.5 |
| 2024 Q4 | 7,523 | 3 | 0 | 398.8 |
| 2024 Q3 | 8,253 | 3 | 1 | 363.5 |
Mostrar 41 trimestres anteriores Ocultar trimestres anteriores
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2024 Q2 | 7,738 | 1 | 0 | 129.2 |
| 2024 Q1 | 8,980 | 3 | 1 | 334.1 |
| 2023 Q4 | 7,897 | 4 | 0 | 506.5 |
| 2023 Q3 | 9,476 | 1 | 0 | 105.5 |
| 2023 Q2 | 7,825 | 4 | 0 | 511.2 |
| 2023 Q1 | 8,909 | 4 | 0 | 449.0 |
| 2022 Q4 | 7,884 | 5 | 0 | 634.2 |
| 2022 Q3 | 11,329 | 7 | 0 | 617.9 |
| 2022 Q2 | 8,589 | 10 | 0 | 1164.3 |
| 2022 Q1 | 5,683 | 5 | 0 | 879.8 |
| 2021 Q4 | 6,924 | 5 | 1 | 722.1 |
| 2021 Q3 | 8,537 | 3 | 2 | 351.4 |
| 2021 Q2 | 9,122 | 3 | 1 | 328.9 |
| 2021 Q1 | 5,921 | 3 | 0 | 506.7 |
| 2020 Q4 | 6,848 | 9 | 3 | 1314.3 |
| 2020 Q3 | 5,597 | 4 | 0 | 714.7 |
| 2020 Q2 | 6,750 | 4 | 1 | 592.6 |
| 2020 Q1 | 5,113 | 5 | 0 | 977.9 |
| 2019 Q4 | 6,347 | 6 | 0 | 945.3 |
| 2019 Q3 | 5,575 | 0 | 0 | 0.0 |
| 2019 Q2 | 5,621 | 2 | 0 | 355.8 |
| 2019 Q1 | 4,346 | 0 | 0 | 0.0 |
| 2018 Q4 | 5,941 | 0 | 0 | 0.0 |
| 2018 Q3 | 4,668 | 1 | 0 | 214.2 |
| 2018 Q2 | 5,141 | 4 | 0 | 778.1 |
| 2018 Q1 | 4,042 | 3 | 0 | 742.2 |
| 2017 Q4 | 4,312 | 3 | 1 | 695.7 |
| 2017 Q3 | 3,200 | 3 | 1 | 937.5 |
| 2017 Q2 | 2,862 | 1 | 0 | 349.4 |
| 2017 Q1 | 1,514 | 1 | 0 | 660.5 |
| 2016 Q4 | 1,927 | 0 | 0 | 0.0 |
| 2016 Q3 | 1,476 | 0 | 0 | 0.0 |
| 2016 Q2 | 1,637 | 1 | 0 | 610.9 |
| 2016 Q1 | 1,065 | 1 | 0 | 939.0 |
| 2015 Q4 | 545 | 2 | 0 | 3669.7 |
| 2015 Q3 | 206 | 0 | 0 | 0.0 |
| 2015 Q2 | 149 | 0 | 0 | 0.0 |
| 2015 Q1 | 87 | 0 | 0 | 0.0 |
| 2014 Q4 | 94 | 0 | 0 | 0.0 |
| 2014 Q3 | 214 | 0 | 0 | 0.0 |
| 2014 Q2 | 266 | 0 | 0 | 0.0 |
Incidentes reportables
7 en archivo2026 · 1 incidente
2024 · 1 incidente
Miners were working to remove bolts from the cone crusher utilizing an air impact gun and a wrench for back up. A miner's right pinky finger was smashed between the cone and wrench handle while holding the wrench as backup when the air impact was engaged.
2021 · 2 incidentes
EE lifted engine hood to change engine air filter. EE forgot to secure hood brace and hood fell on EE hard hat.
EE was helping remove bucket pin. EE tried to catch pin when it came out and hand got pinched between pin and bucket. After lingering pain, EE sought medical treatment on 11/09/2021 making injury reportable
2020 · 2 incidentes
Employee was using a retractable blade box cutter to cut detonation chord when the blade went through the cord and cut EE's thumb
Employee was pulling the door of a 988 closed when employee felt something pinch and /or pull in lower back. Employee has had multiple doctors visits, with not finite information until recently. An MRI revealed bulging of discs, what was treated with steroid injections as of yesterday 2/26/2020. We believe this has triggered an MSHA re-portable event.
2019 · 1 incidente
Getting off an excavator and slipped and fell on a rock. It was rainy and slick.