Avísenme cuando se presente un nuevo incidente de la MSHA en RHEX Vernal Mine.
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2025 Q4 | 15,008 | 0 | 0 | 0.0 |
| 2025 Q3 | 9,310 | 0 | 0 | 0.0 |
| 2025 Q2 | 14,166 | 6 | 1 | 423.5 |
| 2025 Q1 | 13,787 | 0 | 0 | 0.0 |
| 2024 Q4 | 35,362 | 5 | 0 | 141.4 |
| 2024 Q3 | 46,534 | 3 | 1 | 64.5 |
| 2024 Q2 | 41,645 | 0 | 0 | 0.0 |
| 2024 Q1 | 39,894 | 14 | 4 | 350.9 |
10'x 4' metal sheet was being placed in crusher hopper when weld failed holding lifting device. Metal dropped approximately 8" landing on operators left foot above the steel toe. This broke 4 bones in top of operators foot.
Repairing sheet metal on exterior of mechanic shop. miner was install small piece of sheet metal. while putting a screw in it the metal spun and cut EE's left index finger.
Crusher hood impact plate adjustment rod hit employee in elbow when it flexed to let a piece of metal through crusher. Operator was cleaning platform.
Plant manager was washing a process pump with a pressure washer. They got their RH middle finger in front of the HP water jet cutting the skin on the finger. Today 2/29/2024 they needed to receive treatment and antibiotics for infection.
Mechanic was exiting A60H haul truck lost footing slipped and fell to the ground. landed on shoulder and side. Hurt shoulder went to urgent care got x-rays nothing visible in x-ray will return for follow-up. When swelling goes down.
Trip & fall to knees
While hammering a bucket conveyor door closed after cleaning chute company employee struck own left index finger tip. Received 7 stitches to finger tip. Prescribed antibiotics. ibuprofen.
While removing backhoe bucket tooth, mechanic struck top of tooth with sledge hammer. A small piece of metal came off the tooth and hit mechanic in right upper thigh and entered their thigh about 1". Sliver was about 3/4 " long and 1/16th wide. Metal was stuck in leg required removal at Instacare and 3 stitches.
While greasing bearings caught RH middle finger between pully and drive belt.
Conditions were good with mild temperatures, dry footing and good lighting. The accident occurred while the miner was installing a new belt on a belt press. There was an identified opening in the working platform that the miner was aware of and mis-stepped and fell through the opening. Operations were impaired during the time the miner was cared for and EMT's were on site.