Avísenme cuando se presente un nuevo incidente de la MSHA en No. 9A.
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2003 Q1 | 11,811 | 3 | 1 | 254.0 |
| 2002 Q4 | 12,941 | 4 | 1 | 309.1 |
| 2002 Q3 | 24,170 | 15 | 3 | 620.6 |
| 2002 Q2 | 25,412 | 10 | 4 | 393.5 |
| 2002 Q1 | 27,272 | 19 | 2 | 696.7 |
| 2001 Q4 | 26,256 | 3 | 1 | 114.3 |
| 2001 Q3 | 27,182 | 2 | 1 | 73.6 |
| 2001 Q2 | 26,788 | 3 | 1 | 112.0 |
WE HAD A ROOF FALL FOUR BREAKS LEFT OF SPAD #45671 ON SECTION 002. IT MEASURED 40'L X 18'W X 4' THICK. NO EQUIPMENT OR PERSONNEL INVOLVED. FALL WILL NOT BE CLEANED UP AND AREA WAS TIMBERED OFF .
EMPLOYEE WAS STRUCK ON HEAD, FACE AND SHOULDERS WITH A PIECE OF ROOF ROCK. THE ROCK MEASURED 3' LONG X 3' WIDE X 2" THICK. ACCIDENT OCCURRED AT 10:00 A.M. AND EMPLOYEE FINISHED THE SHIFT.
WE HAD A FALL ON SECTION 002 NEAR SPAD #42118. IT MEASURED 20'W X 20'L X 5' THICK. NO PERSONNEL INVOLVED BUT A SMALL SECTION OF MINE POWER FEEDER LINE WAS DAMAGED & REPLACED. FALL WILL NOT BE CLEANED UP SINCE AREA WAS ABANDONED NEXT DAY.
EE'S SAFETY GLASSES SLIPPED DOWN ON HIS FACE DUE TO PERSIRATION WHILE SETTING MINER BITS. A PIECE OF STEEL STRUCK HIM IN EYE.
WE HAD A ROOF FALL IN OUR INTAKE ENTRY ON SECTION 002, ONE BREAK INBY SPAD #41878. IT MEASURED 40'L X 16'W X 5'THICK. NO PERSONNEL OR EQUIPMENT INVOLVED. FALL WILL NOT BE CLEANED UP AND AREA H AS BEEN TIMBERED OFF.
A PIECE OF COAL MEASURING 2'X2'X8' SLIPPED FROM ROOF/RIB, STRIKING EE S BACK.
WHILE LOADING A DEFECTIVE SCRUBBER FAN MOTOR FROM THE CONTINUOUS MINER ONTO A BATTERY POWERED VEHICLE, ONE END OF THE MOTOR FELL OFF THE VEHICLECAUSING EE TO SLIP AND FALL AGAINST THE MOTOR.
EMPLOYEE JUMPED TO GET OUT OF THE WAY OF A SHUTTLE CAR, TRIPPED AND FELL AGAINST RIB.
WE HAD A FALL IN THE NO.2 MAINS BELT ENTRY 75' INBY SPAD #30891. THE FALL EXTENDED ACROSS THE INTERSECTION OF 1 NEUTRAL AND 2 RETURNS. IT MEASURED 20'WX7'TX200'L. THE FALL WAS CLEANED UP IN TH E BELT ENTRY AND IT WAS TIMBERED OFF INT HE RESTOF THE CROSSCUT.
WHILE CHANGING OUT ONE ROOF BOLTING MACHINE WITHANOTHER, A PIECE OF DRAW ROCK FELL FROM ROOF ANDSTRUCK EMPLOYEE'S FOOT. THE ROCK MEASURED 2'X 2'X 3" THICK.
WE HAD A FALL IN THE INTERSECTION OF THE TRUCK ENTRY IN THE SW MAINS NCAR SPAD# 32980. IT MEASURED 20'LONG X 40' WIDE X 6' THICK. NO PERSONNEL INVOLVED, BUT A SMALL PORTION OF TRACK WAS COVERE D, THIS SECTION OF THE ESCAPEWAY WAS RE-ROUTED. AREA HAS BEEN TIMBERED AND CRIBBED OFF.
WHILE DRILLING ROOF BOLT HOLE, BOOM EXTENDED TO LIMIT, DRILL HEAD WAS LOWERED TO PLACE BOLT WRENCH SO DRILL STEEL COULD BE PUSHED TO CORRECT DEPTH. INITIALLY DRILL STEEL WAS STUCK IN HOLE BUT WHEN EMPLOYEE WENT TO PLACE BOLT WRENCH IN CHUCKDRILL STEEL CAME LOOSE, STRIKING HIS HAND.
PIECE OF ROCK FELL ON DRILL HEAD OF BOLTER & EE WAS CLEARING IT WHEN ANOTHER PIECE FELL STRIKINGHIS HAND. HE LOST THE FIRST JOINT OF MIDDLE FINGER & SUSTAINED A FRACTURE OF THE SECOND JOINT.
EMPLOYEE WAS ON A LADDER HANGING CURTAIN. HE SLIPPED AND FELL FROM LADDER, ENTANGLING HIS FOOT IN LADDER, CAUSING HIS KNEE TO BE TWISTED.
EMPLOYEE WAS LOADING AN OXYGEN/ACETYLENE CART INTO A SCOOP BUCKET SO THAT IT COULD BE TRANSPORTED TO #6 BELTHEAD WHICH NEEDED REPAIRS. HE LOST HIS GRIP AND ALLOWED THE CART TO STRIKE HIM ON HI S ANKLE.
FALL IN CROSSCUT FROM #6 ENTRY TO LEFT RIB OF #7ENTRY NEAR SPAD #32544 ON SECTION 002 IN SE MAINMEASURING 4-5'H X 18-19'W X 50'L. NO EQUIPMENT, TRAVELWAYS OR AIRWAYS INVOLVED. FALL IS PARTLY CLEANED UP AND REST OF AREA CRIBBED AND TIMBEREDOFF.
PIECE OF DRILL STEEL HUNG IN HOLE WHEN ROOF DRILL HEAD WAS WITHDRAWN; AS EMPLOYEE WAS REMOVING DOLLY WRENCH FROM DRILL HEAD. THE HUNG STEEL LET GO AND CAUGHT EMPLOYEE'S FINGER BETWEEN STEEL AN D WRENCH.