While lowering welding lead from a belt line, employee was untangling a knot in the wire and slipped and pinched his fingers between the welding lead and the catwalk surface, causing laceration to the back of his right index finger.
Chippewa Falls Sand Plant: 23 citaciones de la MSHA Metal/Non-Metal
Chippewa Falls Sand Plant tiene $3K en multas propuestas de MSHA y $0 pendientes en 0 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en Chippewa Falls Sand Plant.
- Muertes
- 0
- Incidentes totales
- 14
- Años en registro
- 2012–2014
- Último incidente
- Oct 2014
ⓘ
Esta tasa son las citaciones registradas divididas entre las horas de inspección de la MSHA, por cada 100 horas. Refleja el esfuerzo de inspección, no el tamaño de la mina ni la producción.Chippewa Falls Sand Plant tiene $3K en multas propuestas de MSHA y $0 pendientes en 0 expedientes impugnados.
ⓘ
Las diferencias entre las multas propuestas y las pagadas reflejan tanto acuerdos y reducciones en conferencia como montos aun adeudados. Pendiente es el saldo que se debe actualmente.ⓘ
Las proporciones se calculan sobre las citaciones que llevan la codificación de gravedad y negligencia de la MSHA; una pequeña parte de los registros no está codificada.ⓘ
Una muestra es una medición de cumplimiento en un momento dado, no un historial de exposición individual. Estas cifras describen registros de muestreo de MSHA y no establecen causalidad ni dosis personal.Contaminantes en minas de metal y no metal (muestras personales)
ⓘ
Muchas muestras son mediciones de detección de sustancias sin límite de exposición aplicable; se cuentan como muestras pero se excluyen de toda cifra de exceso. Los porcentajes de exceso usan solo muestras con límite establecido.
Última medición: 2019-04-24, hace 7 años
ⓘ
Muchas muestras son mediciones de detección de sustancias sin límite de exposición aplicable; se cuentan como muestras pero se excluyen de toda cifra de exceso. Los porcentajes de exceso usan solo muestras con límite establecido.- Quartz, respirable, >1% Qtz142 en exceso
- Respirable dust, <.1mg7
- Unlisted Particulate, respirable, <1% Qtz3
Ver los análisis individuales (24)
| Fecha | Contaminante | Concentración | Límite | Conc / límite | Ocupación |
|---|---|---|---|---|---|
| 2012-03-27 | Quartz, respirable, >1% Qtz | 0.82 | 0.57 | 1.44 | Electrician |
| 2012-03-27 | Quartz, respirable, >1% Qtz | 0.6 | 0.53 | 1.13 | Washer Operator |
| 2019-04-24 | Quartz, respirable, >1% Qtz | 0.14 | Building Repair/Maint. | ||
| 2019-04-24 | Respirable dust, <.1mg | 0 | Laborer, Bullgang | ||
| 2019-04-24 | Respirable dust, <.1mg | 0 | Laborer, Bullgang | ||
| 2019-04-24 | Respirable dust, <.1mg | 0 | Laborer, Bullgang | ||
| 2019-04-24 | Quartz, respirable, >1% Qtz | 0.19 | Building Repair/Maint. | ||
| 2017-11-29 | Respirable dust, <.1mg | 0 | Track Man/Gang | ||
| 2017-11-29 | Quartz, respirable, >1% Qtz | 0.18 | 0.6 | 0.30 | Mechanic |
| 2017-11-29 | Respirable dust, <.1mg | 0 | Mechanic | ||
| 2017-11-29 | Respirable dust, <.1mg | 0 | Track Man/Gang | ||
| 2017-02-16 | Quartz, respirable, >1% Qtz | 0.14 | 0.35 | 0.40 | Kiln/Dryer Operator |
| 2017-02-16 | Quartz, respirable, >1% Qtz | 0.42 | 0.48 | 0.88 | Mechanic |
| 2017-02-16 | Quartz, respirable, >1% Qtz | 0.25 | 0.41 | 0.61 | Electrician |
| 2014-02-06 | Unlisted Particulate, respirable, <1% Qtz | 0.15 | Laborer, Bullgang | ||
| 2014-02-06 | Unlisted Particulate, respirable, <1% Qtz | 0.13 | Utility Man | ||
| 2014-02-06 | Unlisted Particulate, respirable, <1% Qtz | 0.62 | Laborer, Bullgang | ||
| 2013-05-14 | Quartz, respirable, >1% Qtz | 0.28 | 0.6 | 0.47 | Laborer, Bullgang |
| 2013-05-14 | Respirable dust, <.1mg | 0 | Laborer, Bullgang | ||
| 2012-06-06 | Quartz, respirable, >1% Qtz | 0.13 | 0.56 | 0.23 | Electrician |
| 2012-03-27 | Quartz, respirable, >1% Qtz | 0.23 | 0.4 | 0.58 | Lab Technician |
| 2012-01-04 | Quartz, respirable, >1% Qtz | 0.47 | 0.6 | 0.78 | Building Repair/Maint. |
| 2012-01-04 | Quartz, respirable, >1% Qtz | 0.54 | 0.69 | 0.78 | Washer Operator |
| 2012-01-04 | Quartz, respirable, >1% Qtz | 0.7 | 0.74 | 0.95 | Building Repair/Maint. |
Chippewa Falls Sand Plant registró 0.00 casos de lesión reportables por cada 100 trabajadores a tiempo completo en 2016.
ⓘ
Esta tasa son los casos de lesión reportables por cada 100 trabajadores a tiempo completo por año, calculada como 200,000 por los casos dividido entre las horas-empleado reportadas por el operador a la MSHA. Los casos son lesiones que la MSHA clasificó en grado 01 a 07; se excluyen los eventos de solo accidente que no lesionaron a nadie, y también las lesiones de contratistas, cuyas horas no corresponden a una sola mina. Las tasas comienzan en el año 2000, cuando inicia el reporte trimestral de empleo, y se omiten por debajo de 20,000 horas en un año.| Año | tasa de casos totales | días perdidos | mortales |
|---|---|---|---|
| 2016 * | 0.00 | 0.00 | 0.000 |
| 2015 | 0.00 | 0.00 | 0.000 |
| 2014 | 4.50 | 0.00 | 0.000 |
| 2013 | 6.32 | 1.58 | 0.000 |
| 2012 | 5.55 | 0.00 | 0.000 |
- EOG Resources, Inc. 2011 al presente
| Año | Empleados |
|---|---|
| 2021 | 6 |
| 2020 | 6 |
| 2019 | 6 |
| 2018 | 6 |
| 2017 | 6 |
| 2016 | 14 |
| 2015 | 62 |
| 2014 | 62 |
| 2013 | 63 |
| 2012 | 51 |
| 2011 | 25 |
Chippewa Falls Sand Plant se ubica en Chippewa County, Wisconsin, donde la categoría minera del Censo representa el 0.3% del empleo del condado.
ⓘ
Las cifras del condado provienen de la Encuesta sobre la Comunidad Estadounidense de la Oficina del Censo de EE. UU., estimaciones quinquenales agrupadas, por lo que la edición de 2023 abarca de 2019 a 2023. La categoría del Censo es 'minería, explotación de canteras y extracción de petróleo y gas', que es más amplia que la jurisdicción de la MSHA e incluye a trabajadores de petróleo y gas que ninguna mina emplea. Estas cifras describen el condado circundante, no esta mina, y no son un factor en ningún incidente específico.ⓘ
Citaciones por millón de horas-empleado reportadas. Las tasas comienzan en el año 2000, cuando inician los datos trimestrales de empleo de la MSHA; los incidentes anteriores se cuentan pero no pueden ajustarse por tasa. Los trimestres con menos de 100,000 horas reportadas se muestran en gris: muy pocas horas para una tasa estable.| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2021 Q3 | 2,738 | 0 | 0 | 0.0 |
| 2021 Q2 | 2,726 | 0 | 0 | 0.0 |
| 2021 Q1 | 2,808 | 0 | 0 | 0.0 |
| 2020 Q4 | 2,317 | 0 | 0 | 0.0 |
| 2020 Q3 | 2,650 | 0 | 0 | 0.0 |
| 2020 Q2 | 2,842 | 0 | 0 | 0.0 |
| 2020 Q1 | 2,798 | 0 | 0 | 0.0 |
| 2019 Q4 | 2,262 | 0 | 0 | 0.0 |
Mostrar 32 trimestres anteriores Ocultar trimestres anteriores
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2019 Q3 | 3,045 | 0 | 0 | 0.0 |
| 2019 Q2 | 3,503 | 0 | 0 | 0.0 |
| 2019 Q1 | 2,848 | 0 | 0 | 0.0 |
| 2018 Q4 | 2,467 | 0 | 0 | 0.0 |
| 2018 Q3 | 2,833 | 0 | 0 | 0.0 |
| 2018 Q2 | 2,913 | 0 | 0 | 0.0 |
| 2018 Q1 | 2,813 | 0 | 0 | 0.0 |
| 2017 Q4 | 3,132 | 2 | 0 | 638.6 |
| 2017 Q3 | 4,045 | 0 | 0 | 0.0 |
| 2017 Q2 | 2,683 | 1 | 0 | 372.7 |
| 2017 Q1 | 2,633 | 1 | 0 | 379.8 |
| 2016 Q4 | 2,037 | 0 | 0 | 0.0 |
| 2016 Q3 | 2,262 | 0 | 0 | 0.0 |
| 2016 Q2 | 5,285 | 0 | 0 | 0.0 |
| 2016 Q1 | 14,931 | 0 | 0 | 0.0 |
| 2015 Q4 | 22,034 | 0 | 0 | 0.0 |
| 2015 Q3 | 27,538 | 0 | 0 | 0.0 |
| 2015 Q2 | 28,446 | 0 | 0 | 0.0 |
| 2015 Q1 | 28,909 | 2 | 0 | 69.2 |
| 2014 Q4 | 32,274 | 0 | 0 | 0.0 |
| 2014 Q3 | 32,274 | 0 | 0 | 0.0 |
| 2014 Q2 | 34,036 | 0 | 0 | 0.0 |
| 2014 Q1 | 34,643 | 3 | 0 | 86.6 |
| 2013 Q4 | 29,573 | 0 | 0 | 0.0 |
| 2013 Q3 | 29,754 | 0 | 0 | 0.0 |
| 2013 Q2 | 32,413 | 0 | 0 | 0.0 |
| 2013 Q1 | 34,775 | 0 | 0 | 0.0 |
| 2012 Q4 | 26,482 | 0 | 0 | 0.0 |
| 2012 Q3 | 29,785 | 0 | 0 | 0.0 |
| 2012 Q2 | 27,489 | 2 | 0 | 72.8 |
| 2012 Q1 | 24,292 | 7 | 1 | 288.2 |
| 2011 Q4 | 16,420 | 0 | 0 | 0.0 |
Incidentes reportables
14 en archivo2014 · 4 incidentes
A maintenance worker was completing prep work for the installation of a belt scale when his tool kicked back and made contact to his left forearm.
Utility Operator while shoveling off a truck on the overload platform felt a pop in tendon of his hand.
Miner felt a sting in his left shoulder. Administered first aid: ice packs and heat treatments. On 3/20/14 employee mentioned the first aid was not working enough. He was sent to occupational health clinic for evaluation. He was released with some restrictions and requires physical therapy. This makes it a medical treatment injury with no lost time days.
2013 · 4 incidentes
Prod Supt received voice mail message from employee on Sunday 10/20/13 that employee was going to the doctor for eye irritation. Metal had to be removed from eye at a local medical facility. No incident or specific event was reported on employee's last shift 10/18/13. The incident is still being investigated.
Employee pinched left little finger while setting steel
IE was installing conduit in a 18" trench for temporary power to a contractor's job trailer when he went to step out of trench he felt pain in his right lower calf. IE was transported to medical facility where he was diagnosed with a muscle strain and partial tendon rupture. IE was prescribed a pain reliever and given restrictions to not climb ladders.
While working on an auger employee twisted body and felt his back shift.
2012 · 6 incidentes
While inspecting overhead water lines employee fell causing right leg to get scraped and a small puncture wound just above knee.
Employee was struck on the head by a cluster of sand that fell from an overhead conveyor.
Employee slipped on some sand and fell backwards causing a sternal fracture.
cover fell on left big toe
EE had seizure causing same level fall, causing him to sustain laceration requiring stitches. MD report states seizures are medical condition, not occupational injury/illness. This will be treated as non-recordable injury.
Employee mis-stepped, tripped and fell while climbing stairs.