Buscar en el registro

EMPLOYEE WAS CARRYING A 5 GALLON BUCKET OF HYDRAULIC OIL TO PUT INTO THE DOZER. AFTER MAKING 3 TRIPS WITH THE BUCKET HE DEVELOPED A SLIGHT PAIN IN HIS LOWER BACK.

TRYING TO UNTHAW A PLACTIC LINE USED TO TRANSFER CAUSTIC SODA FROM HOLDING TANK TO TREATMENT PLANT DURING THE PROCEDURE EE MELTED THE PLASTIC LINE EXPOSING A MIXTURE OF GELLED CAUSTIC AND ICE. THE EXPOSED PRODUCT REACTED TO THE HEAT FROM THE TORCH PROPELLING DROPLETS UP AND UNDER SAFETY GOGGLES. EE PROCEEDED TO RUB EYES WHILE STILL WEARING A PAIR OF CONTAMINATED RUBBER GLOVES

MOVING AND LIFTING BARRELS OF OIL AND WATER.

EMPLOYEE WAS LIFTING HIS TOOL BOX FROM THE BACK OF THE SERVICE TRUCK. HE FELT SOMETHING PULL IN HIS GROIN. HE DID NOT GO TO THE DOCTOR OR MISS ANY WORK UNTIL 4-30-01, WHEN HE SAW THE DOCTOR HE WAS TOLD THAT HE HAD A HERNIA AND NEEDED SURGERY. HE WORKED UNTIL 5-11-01 AND WAS SCHEDULED FORSURGERY ON 5-14-01. WE WERE NOT NOTIFIED UNTIL LATER THAT THIS OCCURRED.

REMOVING 50 LB BAGS FROM A HIGH LIFT ABOUT 4' OFF THE GROUND. CARRIED EACH BAG ABOUT 5' IN DISTANCE AND PLACED BAGS (LIME) AT GROUND LEVEL, OUTSIDE ON ROCKY TERRAIN.

CHANGING SEGMENTS ON D-11. DROPPED SEGMENT ON LEFT FOOT.

EE WAS INSTALLING BEARING AND CHIP BROKE OFF STRIKING HIM BELOW LEFT KNEE. PIECE OF METAL LODGED IN LEG.

EE WAS FUELING DRAGLINE FUEL CAP BLEW OFF STRIKING LEFT EYEBROW LACERATING IT AND REQUIRED STITCHES AND XRAYS.

SLIDING DRIVE LINE FROM 992 LOADER THRU A HOLE IT SLID & HIT HAND BETWEEN THE DRIVE LINE & FRAME OF THE LOADER. A CRACKED BONE WAS F0UND ON RIGHT MIDDLE FINTER KNUCKLE

BOOM EXTENSION WAS BEING REMOVED FOR MAINTENANCE TRUCK. THE BOOM EXTENSION FELL OUT HITTING HIM IN THE RIGHT LEG AND FOOT.

EE WAS TAKING LIGHT BULB OUT OF BOOM AND IT BROKE IN HIS HAND

EE PICKED UP TRANSMISSION TO INSTALL IN MECHANICTRUCK

WELDING OFF OF A LADDER. REACHING OUT WITH LEFT HAND ON LOADER BUCKET. BRACING WEIGHT OF BODY ON LEFT WRIST.

EMPLOYEE WAS MOVING PUMP OUT OF DOZER. HE HAD ONE FOOT ON THE MACHINE AND THE OTHER FOOT ON TRACK, WHEN HE TWISTED THE WRONG WAY.

EE HAD JUST FINISHED HIS PRE-SHIFT INSPECTION OF ROCK TRUCK. HE BENT OVER TO PICK UP HIS LUNCH BUCKET AND COULD NOT STRAIGHTEN UP.

EE WAS GETTING UP INTO HIS DOZER AND TWISTED HIS LEFT KNEE. HE CONTINUED TO WORK UNTIL HIS SURGERY ON 3-31-97, AND THAT IS WHEN HE REPORTED HE WAS HAVING PROBLEMS.

EMPLOYEE WAS BENDING OVER TO REMOVE METAL STEPS ON THE THIRD FLOOR OF PLANT. WHEN HE WENT TO STRAIGHTEN UP HE FELT A SEVERE BURNING ON THE LOWER LEFT SIDE OF HIS BACK.

MECHANIC WAS INSTALLING PARKING BRAKE ON 992C LOADER. WHILE LIFTING PARTS HE STRAINED HIS BACK.

WORKING ON A SIZING SCREEN THAT WEIGHS ABOUT 200LBS IN THE PLANT. WHEN HE WENT TO STAND UP HE COULD NOT STRAIGHTEN UP.

EMPLOYEE WAS WORKING ON UNDERCARRIAGE OF DOZER, AS HE WAS LIFTING THE ROLELRS HE FELT A PULL.

EE CUT A PLATE FOR A BUCKET THAT WAS IN THE SHOP FOR REPAIRS. HE WAS PUTTING THE PLATE ON THE BUCKET AND THE PLATE SLIPPED, HITTING HIM IN THE FINGER AND LACERATING THE TIP, REQUIRING 2 STITCH ES.

EMPLOYEE WAS LIFTING FLAT PLATE FROM TRUCK & TWISTED HIS BACK

EE LIFTED SHANK ON BUCKET OF DRAGLINE. KEEPER FELL OFF SHANK AND HE WAS TRYING TO PUT SHANK BACK IN PLACE TO REPLACE THE KEEPER.

BOLT CAME OUT OF GUARD ON SWINGER OF DRAGLINE. HE ATTEMPTED TO REPLACE BOLT AND AIR CYLINDER CAUGHT GUARD AND GUARD HIT HIM IN THE CHIN.

EE WAS REMOVING THE LAST BOLT OUT OF TORQUE CONVERTOR ON DRAGLINE AND IN THE PROCESS TWISTED HIS BACK.

EMPLOYEE WAS PUTTING OIL IN HYDRAULIC MOTOR ON DRAGLINE HE WAS STEPPING DOWN OFF THE TRAVEL MOTOR ONTO FRAME OF MACHINE & TWISTED HIS KNEE

EMPLOYEE WAS ADJUSTING SPEED ON WELDER HIS FINGER SLIPPED & HIT THE FAN

EE WAS WORKING ON A EUCLID ROCK TRUCK, LIFTING WOODEN BLOCKS, AND SUFFERED A HERNIA.

EMPLOYEE WAS PUTTING A STUB BIT FROM THE DRILL INTO TOOL BOX, WHICH REQUIRED LIFTING FROM AN AWKWARD POSITION, WHEN HE FELT SOMETHING PULL AND A TIGHTNESS IN HIS LOWER BACK.

EMPLOYEE WAS TREATING WATER IN PONDS-HIS CLOTHING BECAME WET AND THE LIME CAKED ON HSI KNEE, RESULTING IN SECOND AND THIRD DEGREE BURNS.

EMPLOYEE WAS MOVING A SIDE PLATE. TWO SIDEWALLS WERE LEANING AGAINST A COLUMN. ONE SLIPPED AGAINST THE OTHER AND FELL ON EMPLOYEE.

EMPLOYEE WAS GETTING OUT OF BULLDOZER AND SHUTTING DOOR, WHEN HE TWISTED HIS BACK AND SUFFERED NECK AND BACK PAIN AND INABILITY TO BREATHE.

EMPL WAS CLEANING UP AREA & IN PROCESS OF MOVING HEAVY METAL BOX STRAINED BACK.

FROM A CRAWLING POSITION, EMPLOYEE WAS INSPECTING THE DRIVELINE UNDER A KOMATSU MODEL WA-800-2 WHEEL LOADER, SERIAL #10554, TO SEE WHAT MIGHT BE CAUSING A VIBRATION.

EMPLOYEE SUFFERS TENDONITIS IN THE RIGHT SHOULDER AND PINCHED NERVES IN NECK WHICH HE CLAIMS IS ATTRIBUTABLE TO INJURY INCURRED IN LIFTING 50 LB WET HOLE MATERIALS AND SHOVELING TO REFILL BLAS TING HOLES.

EMPLOYEE WAS CHANGING CUTTING EDGE ON D10 DOZER LIFTED HEAVY PIECE AND HAD SUBSEQUENT PAIN.

EMPL WAS CLEANING UP AREA HE LIFTED AN ELECTRIC VIBRATOR AND TURNED CAUSING SEVERE BACK PAIN

PREPARING TO BALST HOLE AND WHIEL DOING SOT HE RESTED DOWN SPOUT ON NITRATE TRUCK ON SHOULDER CAUSING INJ. CONT TO WORK AND NOTIF. US OF INJ 1-12-89.

EMPLOYEE WAS RIPPING APART AND CLEANING A COAL PUMP.WHILE LIFTING AN IMPELLER OUT OF THE PUMP,HE INJURED HIS BACK.

EMPLOYEE WAS CHANGING TRACKS ON A 455 KOMATSU DOZER WHEN THE GROUSER PAD SLIPPED AND PINCHED HIS THUMB.

WHILE EMPLOYEE WAS GETTING OFF THE LOADER HE WAS OPERATING HIS RING CAUGHT ON T HE GRATE OF THE CATWALK.

WHILE LIFTING A3JACK ON EUCLID TRUCK, EMP SPRAINED WRIST

EMPL WORKING ON3DIESEL TRACTOR AND THE COLD IRON OF THE MACHINE AND THE PRESSURED EXERTED FROM KNEELING ALL DAY RESULTED IN RIGHT KNEE PAIN.

WHILE WORKING O3 D9H BLADE EMP LIFTED AN OZYGEN BOTTLE UP TO PUT IT ON THE OXYGEN HOLDER WHICH WAS ON THE MECHAINICS TRUCK

WHILE UNLOADING A TRUCK LOAD OF STEEL EMPLOYEE WAS TRYING TO MOVE A PIECE OF STEEL TO GET A CHAIN UNDERNEATH

WHILE WORKING ON A DRAGLINE BUCKET EMPLOYEE WAS LIFTING WEAR SHOES INTO PLACE AND STRAINED HIS BACK.

TREATING WATER WITH LIME-WENT TO LIFT SACK OF LIME AND SACK BROKE AND LIME GOT DOWN IN WET COVERALLS.