Buscar en el registro

EE WAS TRYINH TO ADJUST TILT ARM ON DOZER, WHILE PULLING ON BAR HE FELT SHARP PAIN IN HIS BACK LIKE HE MAY HAVE PULLED A MUSCLE.

EE WAS INSTALLING ROLLER FRAMES ON A DRILL. HE CAUGHT HIS FINGER ON THE EQUALIZER BAR AND SMASHED IT.

HE WAS LIFTING HEAVY BAGS OF REFUGE. HE FELT PAIN IN HIS ELBOW. WENT TO DOCTOR ON 3/11/03 AND HAD AN X-RAY. DID NOT MISS WORK UNTIL 3/11. POSTED AT SITE.

WHILE ASSISTING / SUPERVISING BELT CREW INJURED BENT OVER TO HELP AND HIS HAT FELL OFF. HE WENT TO GROUND LEVEL TO RETRIEVE HAT AND WORKER DROPPED BELT CLAMP STRIKING EE ON TOP OF THE HEAD WHI CH REQUIRED 8 STITCHES.

WHILE LIFTING COAL SAMPLES, EE TURNED AROUND AND TWISTED, INJURING NECK/UPPER BACK. DID NOT WORK ON 8-26-02.

CUTTING BOTTOM OF WASHER OUT, BENT OVER TO PICK UP PIECE OF METAL. LOWER BACK/HURT LOWER BACK TWISTED STARTED MISSING WORK 3-11-02.

REBUILDING PUMP AND DROPPED WEAR PLATE ONLEFT HAND. CEASED WORK 2-25-02.

ACCIDENTALLY PLACED FINGER BETWEEN FROTH CELL PADDLE AND EURETHANE BLOCK AFTER PIN CAME OUT OF ONE END OF PADDLE.

WAS OPENING THE CARGO DOOR ON ELEVATOR PUSHING UP ON TOP DOOR AND FELT PAIN IN LOWER BACK.

I WAS KNEELING ON GROUND PUTTING AIR INTO TRUCK TIRE WHEN I TRIED TO STAND UP MY RIGHT KNEE WAS LOCKED AND WOULD NOT STRAIGHTEN.

TWO EMPLOYEES WERE LIFTING A 1/4" X 6" X 6' BEAMABOUT 6' OFF THE GROUND TO WELD INTO PLACE. ONE COMPLAINED THAT NECK WAS HURTING AFTER THAT. HE MISSED WORK 8/10, RETURNED 8/13 AND CEASED WORK ON 8/15/01 AND HAS NOT RETURNED TO WORK TO DATE.EMPLOYER QUESTIONS THE VALIDITY OF THE ACCIDENT.

INJURED WAS THROWING SCRAP METAL & PARTS OUT OF HOIST DOOR BY HANDON 5TH FLOOR OF PREP PLANT WHEN HE GOT A PIECE OF METAL IN FINGER, WHICH LATER BECAME INFECTED. WENT TO DR. ON 4-27, NOTIFIED FOREMAN OF INJURY ON 5-8.

HE WAS LIFTING A BOX AT THE PLANT AND FELT SOMETHING PULL IN HIS LOWER BACK.

HE WAS LIFTING COAL SAMPLE BAGS AND FELT SOMETHING PULL IN HIS STOMACH AREA.

INJURED CLAIMS TO HAVE BEEN PULLING WATER HOSE ACROSS 3RD FLOOR OF PHASE I BUILDING. HOSE HUNG UP CAUSING INJURED TO BE JERKED SIDEWAYS & TWISTING HIS BACK. BEGAN MISSING WORK ON 9/13/00 AFTER DOCTOR VISIT.

INJURED WAS REMOVING A PIECE OF BOLT FROM COAL CHUTE. WHEN HE FELT PAIN IN LOWER BACK. INJURED WAS LEANING OVER IN CHUTE AND JERKED ON BELT.

INSTALLING SIDE ON DRIP PAN UNDER SILO FEED BELT WHEN PIECE OF METAL SLIPPED AND CUT RIGHT KNEE.

INJURED AND OTHER EMPLOYEES WERE CARRYING METAL SHELVING TO PUT IN TEMPORARY STORAGE AREA WHEN A PIECE OF SHELF SLIPPED OUT OF HAND CAUSING TOP OF HAND TO BE LACERATED BY SHELF BRACING.

EE WAS DRAGGING A PUMP THROUGH A LOW AREA IN TRACK TO L-1 ENTRY OF A-13. WHILE PULLING PUMP THROUGH LOW AREA, EE EXPERIENCED PAIN IN HIS RIGHT LEG, RT KNEE AND RT HIP.

EE WAS THROWING CRIB BLOCKS IN XCUT L1-L2 OF THE E15(026-0) SECTION. WHILE THROWING CRIB BLOCKS, EE TWISTED HIS RIGHT SHOULDER. *RETURN REGULAR DUTY 12/29/99 AND WORKED THROUGH 01/12/00. *1ST DAY OFF 01/13/00.

EE WAS LOADING TOOL BOXES INTO A SCOOP TRACTOR BUCKET IN THE ME(024) SECTION R-1 ENTRY. WHILE PULLING ON A HEAVY, METAL, LOADED TOOL BOX, EE FELT PAIN IN HIS BACK AND BOTH LEGS. *FIRST DAY OFF 12-21-1999.

EMPLOYEE WAS REPAIRING CONTINUOUS MINER CAT PADSIN THE E18 SECTION BELT ENTRY. WHILE TWISTING AND PULLING ON A CAT PAD, EMPLOYEE STRAINED HIS BACK.

EE WAS KNEELING ON TOP OF MINER CABLE WHILE SHOVELING ON THE TIGHT SIDE OF THE RFM BELT IN THE E15 (026-0) WORKING SECTION. WHILE KNEELING &SHOVELING HE TWISTED HIS RIGHT KNEE.

EE WAS PUSHING ON A ROOFBOLT TO BEND IT AGAINST THE ATRS FRAME OF THE ROOF BOLTING MACHINE IN THE BELT TO R1 FACE OF THE E15 (026-0) SECTION. WHILE PUSHING, THE ROOF BOLT SLIPPED ON THE ATRS F RAME, CAUSING THE EE TO STRAIN HIS BACK.

EE CLAIMS TO HAVE BENT OVER TO PICK UP CHAIN HOOK ASSEMBLY FOR RAILROAD CAR HOIST, WHEN HE FELT PAIN IN LOWER BACK. INJURED WAS HELPING ANOTHEREEE LIFT CHAIN/HOOK ASSEMBLY TO PUT ON RAILROAD C AR. THE TWO MEN WERE LIFTING APPROX 50 LBS. EACH

EE AND COWORKER WERE PUTTING 20' LONG PIECES OF ANGLE IRON ON RACK. EE'S END FELL OFF ON TOP OF HIS LEFT FOOT, RESULTING IN A CONTUSION OF HIS FOOT.

EE NOTIFIED THE MINE ON JULY 22. BELIEVING HE HAD INCURRED A LOW BACK STRAIN WHILE WALKING TO TRANSPORTATION IN A BENT OVER POSITION AT THE END OF HIS SHIFT ON JULY 21. THE EE STATED HE THOUGH T NOTHING OF IT AND HAD NOT REPORTED ANY INCIDENT TO ANYONE AT THE MINE. THE EE ALSO FAILED TO SEEK MEDICAL TREATMENT WITH A PANEL PROVIDER AS REQUIRED BY WCL.

EE WAS EXITING THE SCOOP TRACTOR OPERATORS COMPARTMENT IN THE E13 (027-0) SECTION BELT ENTRY, WHEN HE TWISTED HIS RT. KNEE. *RETURNED REGULAR DUTY 7-19-99. *FIRST DAY OFF 8-3-99.

EE WAS INSTALLING BELT ROPE WHEN THE TURNBUCKLE THREADS STRIPPED OUT, CAUSING THE EE'S RT. WRIST AND RT. THUMB WAS CAUGHT BETWEEN THE BELT ROPE AND BELT SAILBOAT.

EMPLOYEE WAS DRAGGING A SUBMERSIBLE PUMP INTO MAIN R-1 INTAKE ENTRY TO REPLACE PUMP #99. WHILE DRAGGING PUMP, EMPLOYEE FELT A PAIN IN HIS ABDOMEN.

EE WAS UNLOADING BELT STRUCTURE FROMA SUPPLY CARAND LOADING IT ONTO A SCOOP TRACTOR BUCET AT THEE24 (026-0)SECTION SUPPLY POINT. WHILE LIFTING BELT STRUCUTURE HE FELFT A PAIN IN HIS LOWER BAC

EE WAS PULLING ON PREVIOUSLY TACK-WELDED TAKE-UP GUARDING AT MC #4 BELT DRIVE. WHILE PULLING, THE GUARDING LET LOOSE ALL AT ONCE, AND THE EE FELT AND HEARD SOMETHING SNAP IN HIS RT. SHOULDER.

EE HAD A REOCCURRENCE OF HIS MAY 22,1996 ACCIDENT, WHICH WAS PREVIOUSLY REPORTED ON MSHA 7000-1 FORM.

EE WAS MOVING LOCOMOTIVE BATTERIES IN THE A7 CHARGING STATION. AFTER LIFTING A BATTERY WITH THE ELECTRIC HOIST, EE WAS PUSHING ON THE BATTERY TO MOVE IT WHEN HE FELT A PAIN IN HIS LEFT SHOULDE R. NO LOST TIME PRESCRIPTION MEDICATION ONLY

EE WAS STACKING CRIB BLOCKS IN THE E20(22-0) BELT ENTRY, THAT WERE BEING THROWN TO HIM BY OTHER MINERS. A CRIB BLOCK THAT WAS THROWN BY ANOTHER MINER STRUCK THE EE S LEFT ANKLE.

EMPLOYEE WAS CARRYING TWO 5 GALLON CANS OF OIL AT THE BELT ENTRY TAIL PIECE AREA OF THE E16(026-0) SECTIONS. WHILE CARRYING OIL CANS TO THE CONTINUOUS MINING MACHINE, EMPLOYEE FELT A PINCHING SENSATION IN HIS LOWER BACK.

EE WAS CARRYING A BOXED COMPUTER UP A FLIGHT OF STEPS TO DELIVER IT TO THE MINE OFFICE. WHILE DELIVERING COMPUTER, THE EE HAD SET THE BOX ON A STAIRWAY RAILING TO OPEN A DOOR. WHEN HE LIFTED T HE BOX AGAIN, AND TILTED THE BOX UPWARD, HE FELT A BURNING AND PULLING SENSATION IN LEFT SHOULDER. *FIRST DAY RESTRICTED DUTY 01/28/99*

EE AND ANOTHER MINER WERE MOVING METAL ROOF MATS ON THE TOP OF A ROOF BOLTING MACHINE IN THE L-1 ENTRY OF THE E20(0220-0) WORKING SECTION. WHILE MOVING MATS, O9NE ROOF MAT SLID AND CONTACTED T HE EE'S LEFT LOWER ARM, LACERATING IT. (4 STITCHES).

EE WAS TRAMMING ROOF BOLTER THRU X-CUT B-L1 OF THE E14 (026-0)SECTION, WHEN A ROCK BECAME LODGED BETWEE DRILL HEADS. EE BENT OVER TOP O DRILL HEAD TO MOVE OUT OF BOLTER RUNWAY WHEN HE FELT PAI N IN HIS LOWER BACK. EE RETURNED TO WORK REGULAR DUTY 12-4-98. MEDICAL RX ONLY, CHIROPRACTIC.

EE ROLLED A ROCK OUT OF THE MBC CONVEYOR, IN THE E14 (026-0( SECTION BELT ENTRY, IN ORDER TO SMASH IT. WHILE PICVKING THE ROCK UP, EE FELT PAIN IN HIS LEFT LOWER BACK.

EE WAS LIFTING AND THROWING 6" SOLID CONCRETE BLOCKS IN E16 (027) WORKING SECTION X CUT B-R1 ENTRY. AFTER LIFTING AND THROWING SEVERAL BLOCKS, EE FELT A SHARP PAIN IN HIS LOWER BACK AND RT LEG .

EE WAS LIFTING A WET AND SLIPPERY BOX OF RESIN AND PLACING IT ON TOP OF THE BOLTING MACHINE IN THE E9 (00-1) WORKING SECTION. WHILE LIFTING AND LEANING OUT OVER TOP OF THE MACHINE WITH THE BOX OF RESIN, EE STRAINED HIS BACK. EE RETURNED TO WORK REGULAR DUTY 10-15-98 AND WORKED THROUGH 10-18-98 FIRST DAY OFF 10-19-98.

EE AND ANOTHER MINER WERE PULLING TRACK SPIKES ON MC BELT/TRACK BETWEEN X CUTS 99 AND 00. THIS AREA IS APPROX. 48" HIGH. WHEN EE SAT DOWN TO EAT, HE NOTICED TINGLING, AND PINS AND NEEDLES FEEL INGS IN HIS RT. THIGH AND RT BUTTOCKS.

THE EE STATED THAT HE WAS MOVING VESSEL LINNER TO 2ND FLOOR WHEN PLATE CLAMP RELEASED ALLOWING PLATE TO SLIP AND CATCH LOWER PART OF LEGS.

HE WAS ABOUT TO TIGHTEN THE RADIATOR CAP ON THE D-8 DOZER WHEN THE CAP BLEW OFF SPRAYING HIM WITH ANTI-FREEZE.

EE WAS LIFTING BELT SIDEBOARDS FOR THE E9 BELT AT THE E9 SUPPLY POINT. WHILE LIFTING, THE EE STEPPED, TWISTING HIS LEFT KNEE.

EE WAS LOADING 6" X 6" X 8' WOODEN POSTS INTO A SCOOP TRACTOR BUCKET IN THE R-1 ENTRY OF THE E12 SECTION. WHILE LIFTING A POST INTO THE SCOOP BUCKET, EE STRAINED HIS BACK.

EE WAS REMOVING ROCK FROM THE MINER TAIL TRANSFER PT. IN THE E12(022-0) SECTION X CUT B TO R1 ENTRY FACE. AFTER BREAKING ROCK THE EMPLOYEE GRABBED A PIECE OF ROCK WITHOUT GLOVES AND THE SHARP EDGE TO THE ROCK CUT THE PALM OF HIS RIGHT HAND.RETURN TO FULL DUTY 7-17-98. MEDICAL ONLY - STITCHES.

EE WAS DRAGGING A CHAIN BREAK TOOL THROUGH X CUT B-R1 OF THE E12 022-0 WORKING SECTION WHEN HE FELT A BURNING SENSATION IN HIS LOWER BACK.

IT HAPPENED WHILE LIFTING 4" SLURRY LINE ON THE REFUSE DUMP. HE FELT SOMETHING PULL IN HIS LOWER BACK.