Buscar en el registro

A rock became lodged between the blade arm of the dozer and frame. When removing the stone it slid between the blade and frame causing it to roll backwards resulting in a pinched finger. The resulting injury was an impact laceration with light duty for 3 work days.

Employee was clearing out water pipes, he was pulling a stick out of the drain, the stick snapped back at him and caught him in the upper lip.

While moving a 55 gallon drum of oil onto the forks of a Bobcat the forks moved and tipped over the drum and pinned the employee's finger between the drum and another 55 gallon drum nearby.

The employee was helping to change screens on the crushing plant. The screen slipped and crushed his left finger between the screen and the spring on the vibrator.

The employee was moving an idler roller on the crushing plant and it fell and smashed the employee's finger between the idler roller and the man-lift.

Employee was attempting to break a corroded bolt free and his elbow hit a piece of steel.

Employee was bent over and twisting, moving the cribbing(8X8 block) when he felt a pull in his stomach.

The jaw crusher had a rock bridge the opening to the crusher cavity. The employee shut down the crusher and began to attempt to clear the crusher. The employee got his left had pinned between a rock and the grizzle while trying to lift the rock out of the crusher, jamming his ring finger

EE was straightening up screens & organizing warehousing area. He injured his lower back area by picking up a screen. he was not in correct position and he twisted while pulling and lifting screen. the screen was 4' x 8' and weighty about 125 lbs

EE WAS LOADING A BROKEN SHEAVE INTO A LOADER BUCKET, SUPERVISOR, CAME OVER T HELP PUSH THE SHEAVE INTO THE BUCKET ON ONE SIDE AND IT FELL ONTO HIS HAND.

EMPLOYEE WAS OPENING A OIL BARREL AND HIS HAND SLIPPED AND CUT HIS FINGER.

EE WAS CHANGING THE SCREENS ON OCT 28, HE LIFTED A SCREEN INTO PLACE WITH A SCREEN HOOK. THE SCREEN BEVAME WEDGED AND HE TRIED TO FREE IT BY HAND. THE SCREEN SLID AND CAUGHT HIS HAND BETWEEN THE SCREEN AND THE SIDE RAIL. ON NOV 6TH HE WAS IN THE PROCESS OF TIGHTENING DOWN A SCREEN WITH AN OPEN ENDED WRENCH, IT SLIPPED AND SMASHED HISHAND AGAIN. HE REPORTED IT TO OFFICE.

EE CAME TO MANAGEMENT ON NOV 6TH TO REPORT THAT EITHER ON OCT 19TH OR 26TH WHILE WORKING ON THE PRIMARY CRUSHER HE WAS IN THE PROCESS OF RELINING A STONE CHUTE. HE HAD REMOVED THE OLD CHUTE & WAS PULLING THE NEW LINER UP WITH A CHAIN. HE FELT A PAIN IN HIS BACK. SINCE THAT TIME HE HAS BEEN EXPERIENCING NUMBNESS IN BOTH HIS HANDS.

EE WAS SHOVELING STONE FROM SINGLE SCREW CRUSHER, HE HIT HIS PINKY FINGER ON A PIECE OF METAL ON THE SCREW AND TORE OFF PART OF HIS FINGERNAIL.

LIFTING ROCK WHILE IN AWKWARD POSITION.

EMPLOYEE TRIED TO PULL PIECE OF RUBBER FROM THE GROUND NOT REALIZING IT WAS FROZEN IN GROUND.

EE BENT OVER TO LIFT AN OXYGEN TANK AND LIFTED THE WRONG WAS AND HIS BACK BEGAN TO HURT.

EE WAS UNLOADING OIL DRUMS FROM HIS TRUCK, HE LOST HIS FOOTING AND THE OIL DRUM FELL ON HIS FOOT.

SAND WENT IN EYE WHILE GREASING LOADER.

INSTALLING TAIL PULLEY FINGER CAUGHT BETWEEN BEARING AND COLLAR.

THE PRIMARY CRUSHER HAD JAMMED WITH ROCK, HE WAS CLEANING OUT THE ROCK BY THROWING IT OUT OF THE CRUSHER AND A ROCK CAME BACK AND HIT HIM IN THE ARM AND CUT HIM.

EMPLOYEE WAS IN THE GARAGE AREA CLEANING UP, HE MOVED A SCALLPER COUNTERWEIGHT OUT OF THE WAY. IT HIT A BOLT ON THE FLOOR AND IT CAUSED THE SCALLPER TO FALL OVER AND HIT HIS FOOT. HE WAS WEARI NG STEEL TOED SHOES AT THE TIME BUT IT HIT ABOVETHE STEEL. BROKEN METATARSAL BONE IN HIS LEFT FOOT.

THE EE WAS CLEANING OUT ROC FROM THE CRUSHED THAT WAS JAMMED,HE HAD PUSHED A ROCK OUT & IT CAME BACK & HIT HIS LEFT HAND CRUSHING IT AGAINST THE SIDE OF THE CRUSHER

REACHING FOR PARTS ON BACK OF PARTS SHELF NECK BECAME STIFF

STRUCK FOOT ON BOLT ON TOP OF FUEL TRUCK.

WHEN SETTING A PIECE OF STEEL IN THE BACK OF PICKUP TRUCK DIRT FLEW UP AND GOT IN EYE.

EE WAS INJURED WHILE HOOKING UP PORTABLE AIR COMPRESSOR TO BACK OF PICK UP TRUCK.

WHILE CORRECTINF POSITION OF SAND SCREW TO RE PAIRED,EMPLOYEE CAUGHT FINGER BETWEEN SHAFT AND STEEL SAW HORSE.

WORK RELATED IN1UINAL HERNIA.

IN REMOVING A SHEEVE GROUP,A PIECE OF STEEL USED AS A SHIM BEHIND THE JACK.SLIPPED OUT AND HIT EMPLOYEE ON THE HEAD.

I NAME WAS CHANGING FLAT TIRE ON M85 HAUL TRUCK AND AS HE WAS PULLING OFF LOCK RING THE TIRE AND WHEEL SLIPPED OFF HUM HITTING PRUITT AS IT FELL