Buscar en el registro

The injured employee was using a shop drill press to drill holes in a piece of flat metal. During the drilling process several metal shavings had built up around the bit. The employee then reached in to remove the shavings away from the bit and as he pulled on one of them it sliced through his leather glove, cutting his left index finger.

The injured employee was placing a pump barrel on the bottom shelf. As she maneuvered it into place one of the other barrels on the shelf fell over smashing her finger between the two pump barrels.

Employee was moving/adjusting an extension ladder. He got his left wrist in between the lower and upper rung sections of the ladder, resulting in a bruise to wrist. Taken to emergency room-xray (no fracture), velcro brace, ice, pain medication given. Light duty 10/20/05 (our last work day of week), full duty 10/24/05. Physician follow up visit 11/2/05.

EE was working in the warehouse, helping reorganize & clean the inventory shelves. As he was cleaning, a pump shaft rolled across an upper shelf, fell to the floor, bounced, and then struck him across his right hand, smashing his middle finger.

EE had placed a 55 gallon barrel in a barrel inverter. As he was pulling up on the handle to tighten the chain around the barrel to lock it in place, he felt a pop in his left shoulder.

The injured employee and his partner were transporting a welding machine from the bottom floor of the MVO building to the top floor. As EE was shifting the welder to fit through an opening he smashed his left hand pinky finger between the frame of the welder and the handrail around the hoist way opening.

Employee was removing old pump part from inventory that had been discontinued. As he was removing a casing for a galigher pump from the bottom shelf it fell over. EE stated he then reached down and tried to pick up the casing that had fallen. As he was trying to lift it up he felt a sharp pain in his neck and shoulder blades.

THE INJURED EMPLOYEE WAS OPENING A 2" WATER VALVE ON TOP OF A MIXER/SETTLER TANK. HE HAD REACHED OVER THE RAILING & BEGAN OPENING THE VALVE WHEN HE FELT A SLIGHT PAIN IN HIS UPPER BACK.

THE INJURED EMPLOYEE HAD RECEIVED A DELIVERY AT THE WAREHOUSE. UPON OPENING THE CONTAINER SHE DISCOVERED THAT THE PACKING LIST WAS UNDERNEATH THE PUMP PARTS. SHE REACHED DOWN & GRABBED THE LIST WITH HER RT. HAND & TRIED TO ROLL THE PARTS OFF OF THE LIST WITH HER LEFT HAND. AS SHE MOVED THE PARTS SHE FELT A PAIN IN HER LOW BACK, GOING DOWN HER HIP.

SEVERAL MECHANICS WERE USING AN ELECTRIC HOIST TO LIFT A PUMP UP TO THE THIRD FLOOR OF THE MVO BUILDING. AFTER HOOKING UP THE PUMP, THE INJURED STARTED UP THE STAIRS. AS HE REACHED THE SECOND FLOOR HE SAW THE PUMP HIT AN I-BEAM AND SNAP THE CHOKER, CAUSING THE PUMP TO FALL. HE RAN BACK DOWN THE STAIRS TO CHECK ON THE MECHANICS ON THE BOTTOM FLOOR AND FELT A SLIGHT PAIN IN HIS KNEE.

EE HAD SPOTTED A RAILCAR FOR UNLOADING, AND HAD CLIMBED UP THE LADDER ON THE CAR TO SET THE BRAKE. AS HE WAS TURNING THE BRAKE WHEEL ON THE CAR HE FELT A PULL IN HIS RIGHT SHOULDER.

THE INJRED EE WAS WORKING OUT OF A CRANE MANBASKET REPAIRING A FLANGE ON A WATER COOLING LOOP. HE ASKED HIS PARTNER TO HAND HIM ANOTHER BOLT FOR THE FLANGE, AND AS HIS PARTNER REACHED OUT TO H AND IT TO HIM HE LEANED AGAINST AN ACID LINE CAUSING IT TO START LEAKING AT THE NIPPLE TO THE FLOW METER. ANOTHER MECHANIC THEN TRIED TO SHUT THE ACID OFF AT THE VALVE, WHICH CAUSED THE NIPPL

THE INJURED EE WAS DRAGGING A 2" WATER HOSE USED TO WASH DOWN THE MILL YARD AREA. AS HE WAS DRAGGING THE HOSE ACROSS THE YARD IT CAUGHT UNDERNEATH THE WHEEL OF A PARKED FORKLIFT, STOPPING HIS MOMENTUM AND CAUSING HIM TO JERK BACK, RESULTING IN A STRAIN TO HIS LT. BICEP.

THE INJURED EE STRAINED HIS LOWER BACK WHILE INSTALL A WHEEL BACK ONTO A TRACK MOVILE THAT HE WAS PERFORMING MAINTENANCE ON.

THE INJURED EE WAS LIFTING 110 LB. FIBRE DRUMS FROM A PRODUCTION LINE AND PLACING THE DRUMS ON A PALLET. AS HE LIFTED ONE OF THE DRUMS AND SQUATED DOWN TO PLACE IT ON THE PALLET HE FELT A PULLING IN HIS GROIN AREA.

THE INJURED EE WAS CUTTING BAGS OF ASH FEED MATERIAL IN OUR MILL YARD, AND PULLING THE PLASTIC LINING OUT OF THE FEED STOKC PILE. AS HE WAS PULLING THE PLASTIC FROM THE STOCK PILEHE FELT A PAI N IN HIS LOWER GROIN AREA, WHICH RESULTED IN A HERNIA.

THE INUJURIED EE WAS CHANGING OUT A 5 GALLON WATER JUG LOCATED IN HIS CONTROL ROOM. AS HE WAS REPLACING THE EMPTY CONTAINER HE FELT A POP IN HIS NECK AS HE GOT THE CONTAINER CHEST HIGH, THIS P OP RESULTED IN A STRAINED TRAPEZIUS MUSCLE IN HIS LEFT SHOULDER AND NECK AREA.

THE INJURED EE HAD RELOCATED HIS KEYBOARD TO THE TOP OF HIS DESK IN HIS OFFICE. THE USE OF HIS KEYBOARD IN THIS POSITION RESULTED IN HIS WRIST BEING PLACED ON THE EDGE OF HIS DESK DURING DATA ENTRY. THE AWKWARD POSITION CAUSED IRRITATION TO THE TENDONS IN HIS RIGHT WRIST AND FOREARM.

THE INJURED EMPLOYEE WAS REMOVING A HYDRAULIC PUMP FROM UNDERNEATH AN OIL TANK ON A HOODLOADER. HE OVEREXTENDED HIMSELF PULLING A SHOULDER MUSCLE AS HE TRIED TO REMOVE THE PUMP FROM IT'S BASE.

THE INJURED EE WAS WASHING MATERIAL OUT OF A TROUGH AT THE END OF THE ROD MILL WITH A WATER HOSE. AS HE PULLED THE HOSE FORWARD IT BECAME INTANGLED IN A WODEN 2X4, HE THEN PULLED FORWARD AGAIN S WHICH CAUSED THE 2X4 TO KICK OUT AND GO INTO THE ROD MILL. THE MILL THEN KICKED THE 2X4 BACK OUT AT HIM, STIKING HIM IN THE SHOULDER AND GRAZING HIM ACROSS THE CHIN.

THE INJURED WAS ATTEMPTING TO PUSH 3 DRUMS OF MATERIAL BACK ON A PALLET TO KEEP THEM FROM FALLING OFF. AS HE PUSHED THE DRUMS BACK ON PALLET HE HAD TO REACH ABOVE HIS HEAD FOR THE TOP ROW AND STRAINED HIS LEFT SHOULDER.

THE INJURIED WAS REMOVING OVERSIZED MATERIAL FROM A FEED BELT. AS HE WAS PUSHING THE MATERIAL OFF THE BELT A PIECE OF THE MATERIAL THAT HAD ALREADY PASSED ROLLED BACK AND CAUGHT HIS RIGHT HAND INDEX FINGER BETWEEN THE TWO PIECES OF MATERIAL

THE INJURED HAD COMPLETED REPAIRS ON HAUL TRUCK TRANSMISSION AND WAS ATTEMPTING TO DESCEND THE FRAME RAIL OF THE TRUCK. HE HAD REACHED FOR A HAND HOLD WHEN HIS RIGHT ELBOW STRUCK A LIFT CYLIND ER.

THE INJURED WAS ASSIGNED TO WORK ON A SUMP PUMP. A HEAVY METAL ACCESS DOOR MUST BE HINGED UP IN ORDER TO GET TO THE SUMP PUMP. A METAL HOOK IS USED IN ORDER FOR THE EMPLOYEE TO KEEP FROM HA VING TO BEND OVER AND LIFT THE DOOR BY HAND. THE METAL HOOK WAS MISSING AND THE EMPLOYEE TRIED TO LIFT THE DOOR, INJURING HIS BACK.

THE INJURED WAS ASSIGNED TO REMOVE A VIBRATOR OFF THE SIDE OF A STORAGE BIN AND REPLACE IT WITH A NEW ONE. AFTER THE REMOVAL OF THE OLD VIBRATOR THE INJURED TURNED TO GET THE NEW ONE AND EXPER IENCED PAIN IN HIS LOWER BACK.

EE WAS HELPING PLACE 18" BOULDERS. HE LIFTED ON ONE AND FELT PAIN IN LOWER RT HAND STOMACH.

THE INJURIED WAS ATTEMPTING TO INSTALL A 30 LB CLUTCH ASSEMBLY ON TO A GEAR REDUCER SHAFT. DURING THE ASSEMBLY THE CLUTCH HAD TO BE INSTALLED AND REMOVED SEVERAL TIMES. DURING THIS ASSEMBLY TH E INJURIED FELT THE MUSCLES TIGHTEN IN HIS LOWERBACK.

THE INJURIED WAS LIFTING ROD MILL LIFTER BARS FROM A BUCKET OF A FRONT END LOADER AND SETTING THEM TO ONE SIDE. EACH LIFTER WEIGHED 83 LBS. BY DOING THIS JOB ALONE HE HAD TO TWIST WHILE LIFTIN G IN ORDER TO DO THE JOB.

THE EE AND ANOTHER EE WERE ROLLING A 20FT LONG STICK OF 8" CHANNEL IRON OFF A STORAGE RACK.THE CHANNEL IRON WEIGHED APPROX 230PDS. THE CHANNEL ROLLED TOO QUICKLY PINCHING EE'S RIGHT INDEX FINGER BETWEEN 2 PIECES OF STEEL. HE TRIED TO JERK HIS FINGER OUT FROM UNDER THE CHANNEL AND A SHARP EDGE CUT HIS FINGER

THE INJURIED WAS ASSIGNED TO INSPECT UNDER THE RAILROAD TRACK SCALES. THE ACCESS THIS AREA A 60 LBS STEEL PLATE MUST BE REMOVED. AS THE INJURIED STOOPED DOWN TO LIFT THE PLATE HE FELT A PAIN I N HIS BACK.

THE EE WAS USING A HOSE TO WASH AN AREA CLEAN THAT HE WAS ASSIGNED TO WORK IN. THE HOSE HE USED WAS ATTACHED TO A LINE THAT SUPLIED A LIQUID THAT WAS HIGHER THAN NORMAL PH (@11.0). THE EE WAS AWARE THAT THE PH WAS HIGHER THAN NEUTRAL. AS HEWAS USING THE HOSE SOME OF THE LIQUID SPLASHED INTO HIS EYES. HE WAS WEARING SAFETY GLASSES BUT NOT GOGGLES

THE INJURED WAS ASSSIGNED TO REMOVE, REPAIN & REPLACE AN AIR OPERATED DAMPER. THE INJURED REPORTED THAT HE FEELS LIKE THE INJURY OCCURRED SOMETIME DURING THE WORK ASSIGNEMENT.

INJURED WAS INSTALLING A 6" BUTTERFLY VALVE ABOUT HEAD HIGH. THE VALVE SLIPPED & STARTED TO FASLL & THE INJURED TO KEEP THE VALVE FROM FALLING &IN THE PROCESS HE STRAINED HIS ARM.

EMPLOYEE WAS ASSISTING A MECHANIC THREADING A TWO INCH IRON PIPE. HIS SHIRT GOT TANGLED ON THEPIPE TWISTING HIS LEFT HAND AND ARM.

THE INJURIED WAS REMOVING A PUMP STATOR FROM A MOYNO PUMP. THE APPROX WEIGHT OF THE STATOR WAS 90 LBS. THE INJURIED HAD THE STATOR IN HIS HANDS WHEN HE TURNED TO HAND ON END OF THE STATOR TO A FELLOW EE. THE INJUIED WAS BENT AT THE WAIST ATTHE TIME OF THE ACCIDENT. WHEN HE TWISTED HE FELT A PAIN IN HIS BACK.

EE WAS OPENING A GROUND LEVEL VALVE TO A TRANSFER PUMP WHEN HOT WATER SPLASHED OVER THE TOP OF A STORAGE TANK ADJACENT TO THE VALVE. THE HOT WATER SPLASHED ON THE EE'S RT. SHOULDER AND RT. ARM AREA.

THE INJURED WAS REINSTALLING ABULKY, LGITHWEIGHT (25 POUND) MERCURY VAPOR LIGHT COVER AFTER REPLACING THE LIGHT BULB. HE STATED WHILE HE WAS POSITIONING THE COVER COVER INTO PLACE HE FELT A PAIN IN HIS GROING AREA.

INJURED HAD CARRIED 25 LB. BOX OF PAPER TOWELS INTO CONTROL ROOM & WAS IN PROCESS OF SETTING BOX ON FLOOR WHEN HE FELT SHARP PAIN IN LOWER BACK. INJURED HAD BENT @ WAIST TO SET BOX DOWN INSTE AD OF KNEES.

INJURED WAS MOVING BARRELS OF CONCENTRATE BY HAND A BARREL STARTED TO SLIP OUT OF HIS HANDS THE INJURED TRIED TO HOLD BACK ON THE BARREL & CAUGHT HIS RING FINGER BETWEEN TWO BARRELS

WAS TRYING TO RELEASE BRKE ON RAIL CAR. WHILE TRYING TO TURN WHEEL HE FELT PAIN IN LOWER BACK.

WAS CROUCHED DOWN UNDER THE PREHEATER DOME, OVER AN EXTENDED PERIOD. WHEN HE CAME OUT, HIS BACK FELT STIFF. IT GOT WORSE AND HE LATER WENT TO DOCTOR.

HH WAS UNLOADING A SCREW CONVEYOR OFF A FORKLIFT. HE LOST CONTROL OF THE CONVEYOR AND DROPPED IT ON HIS LEFT THUMB CAUSING LACERATION TO THE TOP AND BOTTOM OF THE THUMB.

WAS RODDING OUT COOLER TRANSITION WHEN HE STEPPED INTO HOT PRODUCT. HE WAS WEARING LOW CUT WORK BOOTS THAT ALLOWED HOT MATERIAL TO ENTER TOP OF BOOT. HE RECEIVED SMALL BURN TO ARM WHILE PULLIN G OFF BOOT.

HE WAS WALKING UNDER ACCESS DOOR TO SMALL GAS HEATER. OTHER MECHNIC WAS OPENING DOOR. WHEN IT CAME OPEN IT FELL, STRICKING VICTIM ON HEAD AND SHOPULDER. IT ORIGANALLY APPEARED TO BE A MINOR INJURY, HOWEVER IT HAS BOTHERED HIM SINCE THAT TIME.

INJ PREPARING TO DRILL BALD HEADED RAISE.MOVING LADDER INTO POSITION WHEN LADDER STRUCK BACK DISLODGING SMALL ROCK WHICH STRUCK ON LEFT WRIST.

THE CONVEYOR SCRAPPER AT HEAD PULLEY OF CRUSHER WAS BENT AS I NAME PULLED IT OUT OF ITS POSITION THE END FLIPPED UP CATCHING HIS THUMB AGAINST THE CONVEYOR FRAME

EMP. WAS ROLLING OVER A 6" BEAM AND CAUGHT HIS RIGHT THUMB BETWEEN THE H BEAM AND THE RIB.

PULLED ON TOP OF 55 GALLON DRUM HALF FULL OF STEEL BALLS & TIPPED ON ITS EDGE & FELT SOMETHING POP IN HIS BACKK. HE HAD HAD PRIOR BACK PROBLEMS AT THAT SPOT IN HIS BACK. HIS BACK DISCOMF ORT DID NOT IMPROVE SO SPECIALIST STARTED TREATMENT 7/5/88.

THREE INCH STEEL BALLS WERE BEING REMOVED FROM 55 GALLON DRUM. AS HE LIFTED ONE OUT HE CONTACTED EDGE OF LID WHICH HAD BEEN BENT OVER. HE CUT HIS LEFT THUMB.

I.NAME WAS MANU5LLY MOVING A BARREL AND GOT HIS FINGER SMASHED BETWEEN IT AND ANOTHER BARREL