Buscar en el registro

Crusher Operator was lifting impact rails about 25lbs over his head to co-workers. After lifting the fifth rail the operator felt pain in his right shoulder that started to radiate down his right arm to fingers. The operator returned to next scheduled shift, after a few months shoulder did not heal operator was seen by doctor whom suggested surgery.

Equipment operator was closing the door on the loader when he caught his right pinkie finger between the door and door frame. The equipment operator received sutures as a result.

Drill Operator was pulling the pull rope to start a 5 HP generator. The operator felt discomfort in his back and reported it to his supervisor. The Drill Operator went to chiropractor for adjustment.

On the nightshift of 7-31-2014 the Haul truck operator finished fueling his truck and accessed his haul truck ladder and claimed to hurt his back the HT Operator reported the incident 8-4-2014 AM. The HT operator was not released to return to work after Appt. on 8-7-2014.

Craftsman was shoveling snow and lifted, twisted and turned simultaneously and caused pain to his lower back. Went to chiropractor for treatment.

Supply Clerk unlocked the double doors to the warehouse filter storage building pushed the lever down, pulled the lever to open the door and the handle broke tearing through his glove and lacerating his right index finger.

Operator was descending a fixed ladder when left foot stuck in the ladder rung and twisted his knee as he reached with his right leg for the next rung. The operator suffered slight tendon tear and started physical therapy on his left knee 1-27-2014.

Plant Operator was adjusting a pipe manifold over the top a protective rubber mat with the help of a co-worker. When he and the co-worker lifted the pipe he felt a pop in his neck and shoulder. The operator did not feel medical aid was required at the time, the operator then sought medical aid on 8-30-2013 and 9-3-2013.

Exploration drill helper moving a pipe back to the rack stand. Helper did not use the proper method to handle the pipe twisted and turned instead of lifting and walking with the pipe. The helper has experienced severe back pain and will be evaluated medically before return to work.

Installing Rolling Steel door, putting curtain of door into guides and employee's finger got pinched between the curtain and the wall. This cut the tip of his middle finger on his right hand.

Employee lifted two bundles of lathe and as he was doing that felt and heard a pop in his shoulder. The employee did not see improvement went to doctor on 5-3 and the doctor diagnosed surgery needed on 6-1-2011.

Operators were winterizing an eight inch poly line. Air was blown through the pipe and was exiting a 2" valve on the other end. An operator ensured that all air had exited the 2" valve. An operator disconnected a 4" quick coupler and the air that was still in the pipe knocked the operator to the ground. The medical determination was a sprained MCL. The investigation is on going.

Employee was sliding a large rock off of a dozer arm. When the rock began to fall he twisted his body to get out of the way. He experienced pain in his left side middle back.

No specific incident occurred. A small fragment of steel became inbedded in the employees eye while performing routine clean up at the crusher. Injury was determined to be work related by Workers Compensation on 07/06/2010.

Employee was washing a 2 liter glass beaker when it broke, resulting in a laceration to right index finger that required 5 stiches

Employee was carrying a framed picture to his vehicle, when the glass in the frame broke and fell on his hand. Laceration to left hand, required 10 stitches.

Employee was stretching out a 3" water hose and handing the nozzle to another person. As the hose unwound, the nozzle rotated and hit the employee on the lip. Two stitches required to cloase laceration. Dental work will be required to repair chipped tooth.

Employee was ascending two steps to entrance of Warehouse office, when she experienced pain in the back of her right knee. Doctor visit revealed pulled hamstring. Employee unable to work next scheduled shift.

Employee was moving a portable fuel tank to a sump area. While in the process of connecting fuel lines his face struck against a piece of tin sticking up above the tank. Laceration to face requiring stitches.

Employee was lifting and handing off an anti-spin mechanism out of a cone crusher, when he experienced sharp pain in lower back, buttocks, and legs. Doctors report reveals bulging disc in lower back. Unable to work next scheduled shift on 3-17-06

Employee was lifting and carrying a loader tooth (992G) from bed of p/u to bucket. After installing tooth on shank and straightening up, he noticed pain in his lower left side of back. Was seen by a chiropractor.

Employee was beginning to climb a ladder on a 100T haul truck. As he stepped on the first step and pulled himself up he felt pain in his lower back. Due to pre-existing non-work related injuries & illnesses the injury was reviewed and determined to be work related on 10-27-04.

EMPLOYEE BENT OVER TO PICK UP A DOZER TRUNNION BALL FROM THE FLOOR. WHILE LIFTING BALL ONTO SHOP TABLE HE STRAINED LOWER BACK MUSCLES. WAS UNABLE TO RETURN FOR REGULAR WORK SCHEDULE ON 4/25/04.

REMOVING A SCREEN FROM A SCREEN DECK, AS HE REMOVED SCREEN HIS HAND STRUCK AGAINST A BRACKET ATTACHED TO THE SIDE OF THE SCREEN DECK, CAUSING A LACERATION TO THE BACK OF HIS HAND. STITCHES.

EMPLOYEE WAS PLACING PIN FLAGS INTO THE GROUND. AS HE WAS STRAIGHTENING UP FROM PLACING A FLAG HE NOTICED A PAIN IN HIS LOWER LEFT SIDE OF BACK. WITHIN 30 MINUTES HIS LEFT FOOT BEGAN TO TINGLE AND BECOME NUMB. HIS CALF MUSCLES BECAME TIGHT WHEN WALKING. HE WAS UNABLE TO WORK HIS SCHEDULED SHIFT ON 08/04/03.

NO SPECIFIC INCIDENT OCCURRED TO CAUSE INJURY, SORE BACK IS A RESULT OF REPETITIVE LIFTING AND CARRYING SAMPLE BAGS OF MATERIAL.

EE WAS LIFTING AND MOVING A STEEL PLATE FROM ONE SAWHORSE TO ANOTHER WHEN HE FELT A SHARP PAIN IN THE RIGHT SIDE OF HIS LOWER BACK.

EE WAS OPERATING IR DM-45 DRILL. WHILE COLLECTING HOLE SAMPLES AND RETRIEVING SAMPLE PAN, EE NOTICED A SHARP PAIN IN HIS BACK. HE WAS SEEN BY A DR. AND BEGAN PHYSICAL THERAPY TREATMENT ON 11-0 1-01.

EMPLOYEE WAS CLIMBING INTO A SCREEN DECK TO PERFORM MAINTENANCE. FINE AIRBORNE PARTICLES WERE IN THE AIR FROM THE TOP SCREEN. SMALL PARTICLE BECAME IMBEDDED IN LEFT EYE, REMOVED BY EYE DOCTOR.

EE WAS PERFORMING CLEAN UP BEHIND JAW CRUSHER. ROCK FROM DECK ABOVE FELL AND STRUCK EE IN THE NECK. DOCTOR REPORT REVEALS BRUISED MUSCLES. X-RAYS REVEAL NO BROKEN BONES.

EE WAS CHANGING A HAMMER ON A DRILL STEEL. HE LIFTED UP ON IT TO GET IT STARTED ON THE STEEL. STRAINED BACK MUSCLES.

EMPLOYEE WAS ATTEMPTING TO DISLODGE A CHOCK BLOCK THAT WAS STUCK UNDER A TIRE. WHEN CHOCK BLOCK BECAME FREE HIS UPPER BODY TWISTED TO HIS SIDE. S TRAINED LOWER BACK MUSCLES.

HE WAS LIFTING SOME CAP BOXES OUT OF THE BLAST PICKUP WHEN HE SAID HIS NECK POPPED. NO REAL REASON WHY HE POPPED HIS NECK UNLESS HE TURNED TOO QUICKLY.

EMPLOYEE WAS CHANGING HAMMER ON DRILL STEEL. WHEN HE MOVED A PIPE IT CAUSED HIS THUMB TO BE CAUGHT BETWEEN THE HAMMER AND THE CAROUSEL ON THE DRILL. LACERATION TO THUMB REQUIRED THREE STITCHES

EE WAS CHANGING A CRUSHER JAW LINER. THE LINER SWUNG AWAY FROM THE JAW CRUSHER AND STRUCK THEE'S LEFT ANKLE, CAUSING A BRUISE AND LACERATION.

EMPLOYEE STATES WHILE ASSEMBLING A ROD CONNECTIONS, THE OVERSHOT TOOL ROLLED OFF THE TOWER, STRIKING HIS LEFT MIDDLE FINGER. SUSTAINED CRUSH INJURY TO FINGER.

EMPLOYEE OPENED TH ERADIATOR CAP OF A HOT ENGINE AND RECEIVED FIRST AND SECOND DEGREE BURNS.

ON 2/28/96 EE WAS STEPPING ONTO THE DECK OF A 992 LOADER WHEN HIS HEAD STRUCK THE BRACE SUPPORTING THE MIRROR, THIS CAUSED PAIN IN HIS NECK & HE WENT TO THE CHIROPRACTOR ON 3/11/96.

EMPLOYEE WAS CHANGING CUTTING EDGES ON A DOZER WITH THREE OTHER PEOPLE. WHEN THEY SET IT ON THE DOZER HE HAD HIS FINGER UNDER IT CAUSING A FRACTURE TO THE TIP OF HIS MIDDLE FINGER.

EMPLOYEE WAS CARRYING A HYDRAULIC JACK WHEN HE SLIPPED AND DROPPED THE JACK ONTO HIS LEFT INDEX FINGER TIP. CAUSED A FRACTURE TO HIS FINGER TIP.

EE WAS CHANGING A CUTTING EDGE ON A CATERPILLAR 992 LOADER WHEN HIS RIGHT INDEX FINGER CONTACTED A SPINNING BOLT CAUSING A LACERATION.

EMPLOYEE WAS HELPING ANOTHER EMPLOYE ELOAD 55 GALLON BARRELS INTO THE BUCKET OF A BOBCA. HIS FINGERS CAUGHT BETWEEN THE TOP OF THE BARREL AND A CROSS BRACE THE BARRELS WERE UP AGAINST.

EE WAS CHANGING A PUMP INTHE LIQUID CAUSTIC PROCESS WHEN HE FELT A BURNING INONE EYE. A DROP OF CAUSTIC CONTACTED HIS EYE UNDER HIS SAFETY GLASSES AND FACE SHIELD. EE MISSED ONE WORK SHIFT DUE TO EYE SPECIALIST APPOINTMENT.

EMPLOYEE WAS LAYING OUT ONE POUND PRIMERS WHEN HIS BACK WAS HURTING. HE SWITCHED TO MAKING UP BOOSTERS THEN DRIVING THE ANFO TRUCK.

PLACING MOTOR ON FRAME MOUNT. EMPLOYEE PLACED LEFT INDEX FINGER INTO BOLT HOLE TO CHECK ALIGNMENT. THE MOTOR SHIFTED AND CUT THE TIP OF INDEX FINGER OFF.

EMPLOYEE WAS UNABLE TO WORK ON 6-25-93 REGULAR SHIFT DUE TO BACK PAIN ALLEGEDLY CAUSED BY WORK RELATED STOCK PILE BACK INJURY.

EMPLOYEE WAS PUTTING BOOSTERS DOWN BLAST HOLES WHEN HE FELT A PAIN IN HIS BACK WHICH CAUSED HIS RT SIDE TO GO NUMB NO EXACT CAUSE HAS BEEN DETERMINED

I.NAME HELPING ANOTHER EMPL LOAD A GRIZZLEY BAR WEIGHING 80 LB INTO BUCKET OF BOBCAT LOADER. WHEN BAR SET DOWN IT ROLLED OVER AND PINCHED TIP OF RIGHT MIDDLE FINGER BETWEEN 2 GRIZZLEY BARS.

54736YEE WAS ATTEMPTING TO CATCH A VIDEO TAPE THAT WAS FALLING OFF OF HIS LOCKER SHELF. AS HE WENT TO CATCH IT, HIS HAND STRUCK HIS LOCKER DOOR RESULTING IN A LACERATION TO HIS RIGHT INDEX FIN 759?0

MOVING LADDER FROM ONE SIDE OF EQUIPMENT TO THE OTHER. A BAR WHICH WAS PROPPED AGAINST THE LADDER FELL ONTO FOOT.