Buscar en el registro

WHILE HELPING C2ANGE A TRIP CABLE,HIS RIGHT HAND WAS PINCHED BETWEEN THE SHOVEL BUCKET AND THE BUCKET.

WHILE CLOSING E5EVATOR DOORS LEFT HAND WAS PINCHED BETWEEN THE DOORS

INJURED EMPLOYE9 WAS INSTALLING RETURN ROLLER ON 1A CONVEYOR IN DRIVE HOUSE #1. WHILE TIGHTENING BOLT ON BRACKET TO HOLD ROLLER, HE FELT PAIN IN HIS LOWER BACK. EMPLOYEE WAS WORKING IN A NARRO W WALKWAY IN A 7RAMPED POSITION.

WHILE REPLACING C-2 EAST SPLASH SHIELD FILTER INJURED PINCHED HIS FINGER BETWEEN SHIELD AND CONDUIT.

INJURED EMPLOYEE WAS SITTING ON SAMPLER GRATING COVER PLAE INSPECTING INSTALLATION OF FURNACE DISCHARGE SAMPLER WHICH IS LOCATED BETWEEN FLOOR GRATING AS HE WAS GVETTING UP FROM THIS POSI TION HIS FINGER WAS PINCHED BETWEEN THE COVER PLATGE AND THE FLOOR GRATING

WHIEL REPLACING D2 CONCENTRATE LINE ADAPTER THICKENER LEVEL HE BUMPED HIS KNEE ON CONNECTING CLAMP

INJURED EMPLOYEE WAS HAVING HIS PICK UP LOADED WITH BARRELS OF OIL. THE BARRELS WERE PLACED AT THE END OF THE TRUCK BOX BY THE FORKLIFT. WHILE ATTEMTPING TO MOVE THE BARRELS MANUALLY TO THE FR ONT OF THE TRUCK BOX, HE FELT A CATCH IN HIS BACK.

EMPLOYEE WAS WORKING ON TRACK AT REA 9 POCKET WHEN HE BENT OVER TO PICK UP A CLAW BAR WHILE REACHING HE FELT PAIN IN HIS BACK

EMPLOYEE WAS CCLEANIGN THE LUNCH ROOM. HE BENT OVER TO PICK UP SOME PAPER FROM THE FLOOR AND FELT A SHARP PAIN IN HIS BACK.

EMPLOYEE WAS INSTALLING A PELLET PUMP ON C2 FURNACE AND FELT A KINK IN HIS BACK.

EMPLOYEE WAS MOVING HEATER CORES AND FELT A APAIN IN HIS GROIN AREA.

EMPL FELT PAIN WHILE PULLING R R SWITCHES.

WHILE LIFTING A PIECE OF TRACK EQUIPMENT INTO THE BACK OF A TRUCK WITH FELLOW WORKERS HE STRAINED HIS NECK

WHILE PREPARING TO ADD ZINC TO TRANSFER POT IN FINE CRUSHER REPAIR BAY INJURED REACHED & PULLED COVER OPEN CATCHING MIDDLE FINGER RT HAND BETWEEN COER & TRANSFER POT

IN PROCESS OF SADDLING PRIMARY MILL DURING MILL CHANGE OUT.INJ JOB WAS TO HOOK EYE OF CABLE ONTO CABLE CART.CABLE SPRUNG BACK AND STRUCK HIS KNEE.

WHILE PULLING SLIDING DOOR OPEN INJUREDS FINGER WAS PINCHED BETWEEN HINGE AND DOOR

WHILE INSTALLING BELT GUARD ON SOUTH REFRIND PUMP, THE GUARD SLIPPED AND CAUGHT HIS THUMB BETWEEN THE GUARD AND SHEEVE.

CHANGING FILTER BAGS ON FILTERS EMPL TWISTED HIS BACK.

WHILE REPLACING FURNACE DISCHARGE BELT INJURED WAS CLEARING A CABLE SLING FROM A PILE OF RODMILL RODS. WHEN HE PULLED THE CABLE ONE ROD FELL FROM THE PILE & STRUCK HIS LEFT FOOT.

POURING ZINC ON 3RD ROW CONCAVES SO 60 CRUSHER INJ ARM TOUCHED HOT TRANSFER POT.

MECHANICS HAD CHANGED OUT ROD MILL SCREEN ON 18N.ATTEMPTED TO REMOUNT ROD MILL SCREEN MOTOR AND BRACKET FOUND IT WOULD NOT FIT DIE TO WELDING ON FRAME.INJ CLIMBED ONTO HALF DECK TO EXAMINE FRA ME.WHEN STANDING NORTH OF SUSPENDED ROD MILL MOTOR,MOTOR EYE BOLT BROKE DROPPING MOTOR AND BRACKET ONTO LEFT THIGH.

EMPLOYEE WAS STACKING FILTERS AND DROPPED THE FILTER HE WAS CARRYING SQUEEZING THE TIP OF HIS LEFT RING FINGER BETWEEN TWO FILTERS

EMPLOYEE WAS PULLING DOWN ACCESS LADDER ON 7150 SHOVEL IN AREA 9 AND INJURED HIS LEFT ELBOW

WHILE HAND DUMPING A PELLET TRAIN, EMPLOYEE WENT INTO RAILROAD CAR. WHILE ATTEMPTING TO GET OUT, HE MAY HAVE STRAINED A MUSCLE WHEN RAISING HIS BODY WITH HIS ARMS.

WHILE IN THE PROCESS OF UNLOADING A PIPE CLAMP OFF A TRUCK ONE-HALF OF THE CLAMP FELL PINCHING HIS FINGER ON THE BED OF THE TRUCK

PLACING SLACK ADJUSTER REPAIRED INTO RACK AND IT DROPPED ON LEFT HAND.

BACK BECAME SORE AFTER LIFTING PIPE PREVIOUS DAT.

WORKING ON REPAIRING STARTERS AND ALTERNATORS,GETTING UP FROM STOOL TO WALK OER TO PUT ALTERNATOR ON TESTING MACHINE,FELT RIGHT KNEE BUCKLE.TWISTED LEFT KNEE TRYING MAINTAIN BALANCE.

WHILE WORKING WITH FELLOW WORKERS ATTEMPTING TO CLOSE VALVES UNDER 3 NORTH THICKNER AND WERE UNABLE TO MOVE THEM. THEY WERE ON THE THIRD VALVE WHEN THE FITTING BROKE AND INJURED WAS STRUCK BYU THE VALVE

WHILE IN THE PROCESS OF BRACING POLES WITH ROCKS HIS RT THUMB WAS CAUGHT BETWEEN TWO ROCKS

WHILE CHECKING OIL NOZZLES ON F-1 CHAMBERS, THE FURNACE WAS DOWN FOR REPAIRS TO THE CHARGING MACHINE. IN THE PROCESS OF DISCONNECTING THE FLEX HOSE TO T HE WEST BURNER, HOT OIL SPRAYED FROM T HE CONNECTION BEING LOOSENED HITTING HIM ON THE FACE, ARM-RT.- & CHEST.

EMP WAS PICKING UP SCRAP AT PELLET STOCKPILE AND BENT OVER TO PICK UP A TIE ROD AND FELT SHARP APAIN IN HIS BACK

EMPLOYEE HAD REMOVED WORN LINER FROM A STANDARD CRUSHER SHAFT. THE LINER WAS SPLIT AND SEPARATED APPROX. 1 INCH. IN REMOVING THE ZINC FROM THE LINER AND THE EMPLOYEE\S LEFT HAND WAS NEAR THE S EPARATION, THE SEPARATION CLOSED AND PINCHED THEPALM OF THE LEFT HAND.